T496X107M006AS

SOLID TANTALUM CHIP CAPACITORS T496 SERIES—Fail-Safe Fused FEATURES • • • • • • • • Built-in fuse protects against damaging short circuit failure mode Precision-molded, laser-marked case Symmetrical, compliant terminations Taped and reeled per EIA 481-1 Case geometry and footprints equivalent to Industrial Grade T491 Series. (Case sizes B, C, D and X only) 100% Surge Current test on C, D, X sizes Patented fuse assembly Operating Temperature: -55˚C to +125˚C Fuse actuation, 25C: within 1 second at fault currents of 4 amps and higher. Continuous current capability: 0.75 amps Post-actuation resistance, 25C: 10 megohms minimum Test tabs on the sides of the case bypass the capacitor element to allow direct testing of the fuse assembly. RoHS Compliant & Leadfree Terminations (See www.kemet.com for lead transition) • • • • • OUTLINE DRAWINGS CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW B W Test Tab 0.15(0.006) Max. H K B E T S X BOTTOM VIEW F P S G R A L Termination cutout at KEMET’s Option, either end DIMENSIONS — Millimeters (Inches) CASE SIZE KEMET EIA B 3528-21 C 6032-28 D 7343-31 X 7343-43 H ± ± ± 10 (.1 (.287 ± .012) (.169 ± ± .012) ± 0.20 K ± (.008) ± 0.1 1.1 (.043) 1.4 (.055) 1.5 (.059) 2.3 (.091) 2.2 (.087) 2.2 (.087) 2.4 (.094) 2.4 (.094) S ± 0.3 0.8 (.031) 1.3 (.051) 1.3 (.051) 1.3 (.051) ± 0.15 B (Ref) ± (.016) 0.5 (.020) 0.5 (.020) 0.5 (.020) X (Ref) ± (.004 P (Ref) R 1.0 1.0 1.0 A G E T (Ref) (Min) (Ref) (Ref) 2.1 1.8 2.2 (.083) (.071) (.087) 2.8 (.1 (.094) 3.5 (.138) 1.0 (.004 ± (.067) (.005) (.150) (.138) (.138) Notes: 1. Metric dimensions govern. 2. (Ref) - Dimensions provided for reference only. * Round glue pad: 2.9 ± 0.1mm (.114" ± .004") in diameter at KEMET’s option. T496 Series – ORDERING INFORMATION T 496 B 105 M 025 A S Lead Material Tantalum Series T - 100% Sn (Tin) Plated H - Tin/Lead (SnPb - 5% Pb minimum) **S - Not recommended for new designs T496 - Precision Molded, Fail-safe Failure Rate Case Size A - Not Applicable B, C, D, X Voltage Capacitance Tolerance Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. *Part number example: T496B105M025AT (14 digits - no(14 spaces). See www.kemet.com Part Number Example: T496B105M025AS digits no spa es) for Pb Free transition. ** “S” Termination codes are converting from 90Sn/10 Pb to 100% tin finishes. Orders including “S” suffix M - ± 20% K - ± 10% termination codes do not quarantee Pb-free product. TYPICAL FUSE ACTUATION PROFILE Current (Amps) 10 1 .0001 .001 .01 .1 1 10 Time (Seconds) 36 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 SOLID TANTALUM CHIP CAPACITORS T496 RATINGS & PART NUMBER REFERENCE Capacitance µF Case Size KEMET Part Number DCL µA @ 25°C Max. DF % @ +25°C 120 Hz. Max. ESR Ω @ +25°C 100 kHz Max. 4 Volt Rating at +85°C (2.7 Volt Rating at +125°C) T496C686(1)004A(2) 2.7 6.0 4.0 8.0 T496C107(1)004A(2) 6.0 8.0 T496D157(1)004A(2) 8.8 8.0 T496D227(1)004A(2) 13.2 8.0 T496D337(1)004A(2) T496X337(1)004A(2) 13.2 8.0 T496X477(1)004A(2) 18.8 8.0 **6 Volt Rating at +85°C (4 Volt Rating at +125°C) 0.5 6.0 B T496B475(1)006A(2) 0.5 6.0 B T496B685(1)006A(2) 0.6 6.0 B T496B106(1)006A(2) 1.3 6.0 B T496B226(1)006A(2) 0.9 6.0 C T496C156(1)006A(2) 1.4 6.0 C T496C226(1)006A(2) 2.0 6.0 C T496C336(1)006A(2) 2.9 6.0 D T496D476(1)006A(2) 2.9 6.0 *C T496C476(1)006A(2) 4.1 6.0 D T496D686(1)006A(2) 4.1 6.0 *C T496C686(1)006A(2) X T496X107(1)006A(2) 6.0 8.0 6.0 8.0 D T496D107(1)006A(2) 9.0 8.0 *D T496D157(1)006A(2) 13.2 8.0 *D T496D227(1)006A(2) T496X227(1)006A(2) 13.2 8.0 *X T496X337(1)006A(2) 19.8 8.0 *X 68.0 100.0 150.0 220.0 #330.0 330.0 #470.0 1.6 1.2 0.8 0.7 0.7 0.7 0.5 3.5 3.5 3.5 3.5 2.0 2.0 2.0 1.0 1.6 1.0 1.2 0.9 0.8 0.7 0.7 0.7 0.5 10 Volt Rating at +85°C (7 Volt Rating at + 125°C) B T496B335(1)010A(2) 0.5 6.0 0.5 6.0 B T496B475(1)010A(2) 0.7 6.0 B T496B685(1)010A(2) 1.0 6.0 C T496C106(1)010A(2) 1.5 6.0 B T496B156(1)010A(2) 1.5 6.0 C T496C156(1)010A(2) 2.2 6.0 C T496C226(1)010A(2) 3.3 6.0 D T496D336(1)010A(2) 3.3 6.0 *C T496C336(1)010A(2) 4.7 6.0 D T496D476(1)010A(2) 4.7 6.0 *C T496C476(1)010A(2) X T496X686(1)010A(2) 6.8 6.0 6.8 6.0 D T496D686(1)010A(2) 10.0 8.0 D T496D107(1)010A(2) T496X157(1)010A92) 15.0 8.0 *X 15.0 8.0 *D T496D157(1)010A(2) T496X227(1)010A(2) 22.0 8.0 *X 16 Volt Rating at +85°C (10 Volt Rating at +125°C) 0.5 6.0 B T496B225(1)016A(2) 0.5 6.0 B T496B335(1)016A(2) 0.8 6.0 B T496B475(1)016A(2) 1.1 6.0 C T496C685(1)016A(2) 1.6 6.0 B T496B106(1)016A(2) 1.6 6.0 C T496C106(1)016A(2) 2.4 6.0 C T496C156(1)016A(2) 3.6 6.0 D T496D226(1)016A(2) 3.6 6.0 *C T496C226(1)016A(2) 5.3 6.0 D T496D336(1)016A(2) X T496X476(1)016A(2) 7.5 6.0 7.5 6.0 D T496D476(1)016A(2) *X T496X107(1)016A(2) 16.0 8.0 3.3 4.7 6.8 10.0 15.0 15.0 22.0 33.0 33.0 47.0 #47.0 68.0 68.0 100.0 150.0 #150.0 #220.0 2.2 3.3 4.7 6.8 10.0 10.0 15.0 22.0 22.0 33.0 47.0 47.0 100.0 3.5 3.5 3.5 2.0 3.5 2.0 2.0 1.0 1.6 1.0 1.2 0.9 0.8 0.7 0.7 0.7 0.5 3.5 3.5 3.5 2.0 3.5 2.0 2.0 1.0 1.6 1.0 0.9 0.8 0.7 T496 SERIES CONSTRUCTION Negative Termination* Silver Adhesive Washer Molded Case Polarity Stripe (+) Case Size Polarity Bevel (+) 1.5 2.2 3.3 4.7 6.8 10.0 15.0 22.0 33.0 47.0 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10.0 10.0 15.0 22.0 22.0 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10.0 15.0 22.0 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 B B B C C C D D X X T496B155(1)020A(2) T496B225(1)020A(2) T496B335(1)020A(2) T496C475(1)020A(2) T496C685(1)020A(2) T496C106(1)020A(2) T496D156(1)020A(2) T496D226(1)020A(2) T496X336(1)020A(2) T496X476(1)020A(2) Weld Mn02 Coat (First Layer) Carbon Positive Termination* (Second Layer) Silver Paint (Third Layer) Tantalum Wire *100% Tin ESR Ω @ +25°C 100 kHz Max. 0.5 0.5 0.7 1.0 1.4 2.0 3.0 4.4 6.6 9.4 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 5.0 3.5 3.5 2.0 2.0 2.0 1.0 1.0 0.9 0.3 6.5 5.0 5.0 3.5 2.5 2.5 2.0 0.6 1.2 1.0 0.9 0.8 8.0 6.5 5.0 4.5 3.5 2.5 1.5 1.3 1.0 0.9 0.3 16.0 14.0 10.0 8.0 7.0 5.5 5.0 2.5 2.0 (1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance. (2) To complete KEMET Part Number, insert lead material designation for Ordering Information on page 36. Higher voltage ratings and tighter capacitance tolerance product may be substituted within the same size at KEMET’s option. Voltage substitutions will be marked with the higher voltage rating. CAPACITOR MARKINGS T496 Series — All Case Sizes Fused Fail-Safe Device Rated Voltage (Ta2O5) DF % @ +25°C 120 Hz. Max. 25 Volt Rating at +85°C (17 Volt Rating at +125°C) B T496B684(1)025A(2) 0.5 4.0 0.5 4.0 B T496B105(1)025A(2) 0.5 6.0 B T496B155(1)025A(2) 0.6 6.0 C T496C225(1)025A(2) 0.9 6.0 C T496C335(1)025A(2) 1.2 6.0 C T496C475(1)025A(2) 1.7 6.0 C T496C685(1)025A(2) 2.5 6.0 C T496C106(1)025A(2) 2.5 6.0 D T496D106(1)025A(2) 3.8 6.0 D T496D156(1)025A(2) X T496X226(1)025A(2) 5.5 6.0 5.5 6.0 D T496D226(1)025A(2) 35 Volt Rating at +85°C (23 Volt Rating at +125°C) B T496B474(1)035A(2) 0.5 4.0 0.5 4.0 B T496B684(1)035A(2) 0.5 4.0 B T496B105(1)035A(2) 0.5 6.0 C T496C155(1)035A(2) 0.8 6.0 C T496C225(1)035A(2) 1.2 6.0 C T496C335(1)035A(2) 1.7 6.0 D T496D475(1)035A(2) D 2.4 6.0 T496D685(1)035A(2) X T496X106(1)035A(2) 3.5 6.0 T496X156(1)035A(2) 5.3 6.0 *X X T496X226(1)035A(2) 7.7 6.0 50 Volt Rating at +85°C (33 Volt Rating at +125°C) B T496B154(1)050A(2) 0.5 4.0 0.5 4.0 B T496B224(1)050A(2) 0.5 4.0 B T496B334(1)050A(2) 0.5 4.0 C T496C474(1)050A(2) 0.5 4.0 C T496C684(1)050A(2) 0.5 4.0 C T496C105(1)050A(2) 0.8 6.0 C T496C155(1)050A(2) 1.1 6.0 D T496D225(1)050A(2) 1.7 6.0 D T496D335(1)050A(2) Fuse Tantalum DCL µA @ 25°C Max. KEMET Part Number 20 Volt Rating at +85°C (13 Volt Rating at +125°C) *C *C D *D *D *X *X 4.7 6.8 10.0 22.0 15.0 22.0 33.0 47.0 47.0 68.0 #68.0 100.0 100.0 150.0 #220.0 220.0 #330.0 Capacitance µF F+ 227 20K 542 Polarity Indicator (+) (Solid Stripe) Picofarad Code KEMET I. D. Symbol Print Week Code: 1st Digit = Year 2nd & 3rd Digits = Week "542" = The 42nd week of 2005 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 37 Solid Tantalum Surface Mount T496 SERIES—Fail-Safe Fused TANTALUM AND ALUMINUM CHIP CAPACITORS Packaging Information Tape & Reel Packaging KEMET’s Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-1: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems. Right Hand Orientation Only (+) Embossed Carrier (–) Embossment 8mm ±.30 8mm (0.315") (.315or±.012") or 12mm (0.472") 12mm ±.30 (.472 ±.012") Top Tape Thickness .10mm (.004") Max Thickness 178mm (7.00") 180mm (7.0") oror 330mm (13.00") 330mm (13.0") Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. QUANTITIES PACKAGED PER REEL Tape Width-mm 8 8 8 12 12 12 8 8 12 12 12 12 12 7" Reel* 2,500 2,500 2,500 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 13" Reel* 10,000 10,000 10,000 5,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000 Packaging Case Code KEMET EIA R 2012-12 S 3216-12 T 3528-12 U 6032-15 W 7343-15 V 7343-20 A 3216-18 B 3528-21 C 6032-28 D 7343-31 Y 7343-40 X 7343-43 E 7260-38 * No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging. ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 91 TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg Minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 Newton to 1.0 Newton (10g to 100g) 12 mm 0.1 Newton to 1.3 Newton (10g to 130g) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Reel Sizes: Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13") reels (with C-7280). Note that 13” reels are preferred. 4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. Embossed Carrier Tape Configuration: Figure 1 Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern) Constant Dimensions — Millimeters (Inches) Tape Size 8 mm and 12 mm D0 E 1.5 1.75 ±0.10 +0.10 -0.0 (0.059 (0.069 ±0.004) +0.004, -0.0) P0 P2 T Max T1 Max 4.0 ±0.10 2.0 ±0.05 0.600 0.100 (0.157 ±0.004) (0.079 ±0.002) (0.024) (0.004) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Max. Note 1 D1 Min. Note 2 F P1 R Min. Note 3 T2 Max W 8 mm Single (4 mm) 4.4 1.0 3.5 ±0.05 4.0 ±0.10 25.0 2.5 8.0 ±0.30 (.315 ±0.012) 12 mm Double (8 mm) (0.173) (0.039) (0.138 ±0.002) (0.157 ±0.004) (0.984) (0.098) 8.2 (0.323) 1.5 5.5 ±0.05 (0.059) (0.217 ±0.002) 8.0 ±0.10 30.0 (0.315 ±0.004) (1.181) 4.6 12.0 ±0.30 (0.181) (0.472 ±0.012) A0B0K0 Note 4 1. B1 dimension is a reference dimension for tape feeder clearance only. 2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2) 4. The cavity defined by A0, B0, and K0 shall be configured to surround the part with sufficient clearance such that the chip does not protrude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm maximum in the pocket (not applicable to vertical clearance.) ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 93 Packaging NOTES TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS Packaging Information Embossed Carrier Tape Configuration (cont.) Sketch D: Tape Camber (Top View) 1mm (0.039) Max. 1mm (0.039) Max. 250mm (9.843) Allowable camber to be 1 mm/250 mm. 400mm (15.75) Min. Figure 2: Tape Leader & Trailer Dimensions (Metric Dimensions Will Govern) Figure 3: Reel Dimensions (Metric Dimensions will govern) Table 2 – REEL DIMENSIONS (Metric will govern) 94 Tape Size 8 mm A Max 330.0 (12.992) B* Min 1.5 (0.059) C 13.0 ± 0.20 (0.512 ± 0.008) D* Min 20.2 (0.795) 12 mm 330.0 (12.992) 1.5 (0.059) 13.0 ± 0.20 (0.512 ± 0.008) 20.2 (0.795) N Min 50.0 (1.969) See Note 3 Table 1 W1 8.4 +1.5, -0.0 (0.331 +0.059, -0.0) 12.4 +2.0, -0.0 (0.488 +0.078, -0.0) W2 Max 14.4 (0.567) 18.4 (0.724) ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 W3 7.9 Min (0.311) 10.9 Max (0.429) 11.9 Min (0.469) 15.4 Max (0.606)