T498A226M016AHE1K5

SOLID TANTALUM CHIP CAPACITORS SOLID TANTALUM CHIP CAPACITORS T498 SERIES—HIGH TEMPERATURE (150°) (150°) T498 SERIES—HIGH TEMPERATURE T498 RATINGS & PART NUMBER REFERENCE Features • • • • • 150°C Maximum temperature capability Temperature/Voltage derating: 2/3 at 150°C Self-healing mechanism Capacitance: 0.47 to 220μF Reliability: 0.5%/1000 Hrs. @ rated voltage @ rated temperature • • • • • • 100% Accelerated steady state aging 100% Surge current testing EIA standard case size Voltage: 6 to 50 VDC RoHS Compliant versions available Various termination options Outline Drawings CATHODE (-) END VIEW W SIDE VIEW B B H K X S T G S R P Termination Termination cutout at cutout at KEMET’s KEMET’s Option, either Option, end either end ANODE (+) END VIEW BOTTOM VIEW E A L F Dimensions - Millimeters (Inches) Case Size KEMET EIA L* W* H* K* ± 0.20 ± (.008) 0.9 (.035) 1.1 (.043) 1.4 (.055) 1.5 (.059) 2.3 (.091) F* ±0.1 ± (.004) 1.2 (.047) 2.2 (.087) 2.2 (.087) 2.4 (.094) 2.4 (.094) Component S* ± 0.3 ± (.012) 0.8 (.031) 0.8 (.031) 1.3 (.051) 1.3 (.051) 1.3 (.051) B (Ref) ± 0.15 ± (.004) 0.4 (.016) 0.4 (.016) 0.5 (.020) 0.5 (.020) 0.5 (.020) X (Ref) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) P (Ref) 0.4 (.016) 0.5 (.020) 0.9 (.035) 0.9 (.035) 1.7 (.067) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) A B C D X 3216-18 3528-21 6032-28 7343-31 7343-43 3.2 ± 0.2 1.6 ± 0.2 1.6 ± 0.2 (.126 ± .008) (.063 ± .008) (.063 ± .008) 3.5 ± 0.2 2.8 ± 0.2 1.9 ± 0.2 (.138 ± .008) (.110 ± .008) (.075 ± .008) 6.0 ± 0.3 3.2 ± 0.3 (.236 ± .012) (.126 ± .012) 2.5 ± 0.3 .098 ± .012 0.4 0.13 1.4 1.1 1.3 (.016) (.005) (.055) (.043) (.051) 1.0 0.13 2.1 1.8 2.2 (.039) (.005) (.083) (.071) (.087) 1.0 0.13 3.1 2.8 2.4 (.039) (.005) (.122) (.110) (.094) 1.0 0.13 3.8 3.5 3.5 (.039) (.005) (.150) (.138) (.138) 1.0 0.13 3.8 3.5** 3.5** (.039) (.005) (.150) (.138) (.138) 7.3 ± 0.3 4.3 ± 0.3 2.8 ± 0.3 (.287 ± .012) (.169 ± .012) (.110 ± .012) 7.3 ± 0.3 4.3 ± 0.3 4.0 ± 0.3 (.287 ± .012) (.169 ± .012) (.157 ± .012) T498 Ordering Information T Tantalum Series 498 – High Temp (150°C) Case Size A,B,C,D,X Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros. Capacitance Tolerance M = ±20% K = ±10% 498 X 227 M 010 A T E500 ESR Note: in mOhm K designates “thousand” E1K5 = 1.5 Ohm E500 = 0.5 Ohm Lead Material T = 100% Tin G = Gold H = Tin/Lead (SnPb 5% Pb min) Failure Rate A = Not Applicable Voltage Note: 006 = 6.3 39 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 39 Solid Tantalum Surface Mount Solid Tantalum Surface Mount SOLID TANTALUM CHIP CAPACITORS T498 SERIES—HIGH TEMPERATURE (150°) T498 RATINGS & PART NUMBER REFERENCE Capacitance µF Case Size KEMET Part Number DC Leakage μA @ 25ºC Max DF % ESR Ω @ +25ºC @ +25°C 120 Hz 100 kHz Max Max 2.1 1.8 1.3 1.7 0.8 0.6 4.6 3.6 2.9 2.7 1.8 1.5 1.8 1.5 1.1 0.6 0.6 0.5 6.5 3.4 2.1 2.6 1.8 2.8 1.4 1.1 1.0 0.6 0.6 0.6 0.1 5.9 1.1 8.5 3.0 1.1 0.7 0.6 0.6 11.0 10.0 3.3 1.7 0.9 0.7 0.5 0.5 1.1 1.0 10.0 15.0 22.0 33.0 47.0 100.0 2.2 3.3 4.7 4.7 10.0 15.0 15.0 22.0 22.0 47.0 100.0 220.0 1.0 3.3 4.7 6.8 6.8 10.0 10.0 15.0 22.0 33.0 47.0 68.0 100.0 1.0 10.0 0.47 2.2 10.0 15.0 22.0 33.0 0.33 1.0 1.5 3.3 6.8 10.0 22.0 33.0 3.3 10.0 B B C B C D A A A B B B C B C D D X A A B A B B C C C D D D X A C A B C D D D A A C C D D X X D D **6 Volt Rating at +85ºC ( 4 Volt Rating at +150ºC) T498B106(1)006A(2)E2K1 0.7 6.0 T498B156(1)006A(2)E1K8 1.0 6.0 T498C226(1)006A(2)E1K3 1.4 6.0 T498B336(1)006A(2)E1K7 2.1 6.0 T498C476(1)006A(2)E800 3.0 6.0 T498D107(1)006A(2)E600 6.3 8.0 10 Volt Rating at +85ºC ( 7 Volt Rating at +150ºC) T498A225(1)010A(2)E4K6 0.5 6.0 T498A335(1)010A(2)E3K6 0.5 6.0 T498A475(1)010A(2)E2K9 0.5 6.0 T498B475(1)010A(2)E2K7 0.5 6.0 T498B106(1)010A(2)E1K8 1.0 6.0 T498B156(1)010A(2)E1K5 1.5 6.0 T498C156(1)010A(2)E1K8 1.5 6.0 T498B226(1)010A(2)E1K5 2.2 6.0 T498C226(1)010A(2)E1K1 2.2 6.0 T498D476(1)010A(2)E600 4.7 6.0 T498D107(1)010A(2)E600 10.0 8.0 T498X227(1)010A(2)E500 22.0 8.0 16 Volt Rating at +85ºC (11 Volt Rating at +150ºC) T498A105(1)016A(2)E6K5 0.5 4.0 T498A335(1)016A(2)E3K4 0.5 6.0 T498B475(1)016A(2)E2K1 0.8 6.0 T498A685(1)016A(2)E2K6 1.1 6.0 T498B685(1)016A(2)E1K8 1.1 6.0 T498B106(1)016A(2)E2K8 1.6 6.0 T498C106(1)016A(2)E1K4 1.6 6.0 T498C156(1)016A(2)E1K1 2.4 6.0 T498C226(1)016A(2)E1K0 3.6 6.0 T498D336(1)016A(2)E600 5.3 6.0 T498D476(1)016A(2)E600 7.5 6.0 T498D686(1)016A(2)E600 10.8 6.0 T498X107(1)016A(2)E100 16.0 8.0 20 Volt Rating at +85ºC (13 Volt Rating at +150ºC) T498A105(1)020A(2)E5K9 0.5 4.0 T498C106(1)020A(2)E1K1 2.0 6.0 25 Volt Rating at +85ºC (17 Volt Rating at +150ºC) T498A474(1)025A(2)E8K5 0.5 4.0 T498B225(1)025A(2)E3K0 0.6 6.0 T498C106(1)025A(2)E1K1 2.5 6.0 T498D156(1)025A(2)E700 3.8 6.0 T498D226(1)025A(2)E600 5.5 6.0 T498D336(1)025A(2)E600 8.3 6.0 35 Volt Rating at +85ºC (24 Volt Rating at +150ºC) T498A334(1)035A(2)E11K 0.5 4.0 T498A105(1)035A(2)E10K 0.5 4.0 T498C155(1)035A(2)E3K3 0.5 6.0 T498C335(1)035A(2)E1K7 1.2 6.0 T498D685(1)035A(2)E900 2.4 6.0 T498D106(1)035A(20E700 3.5 6.0 T498X226(1)035A(2)E500 7.7 6.0 T498X336(1)035A(2)E500 11.6 6.0 50 Volt Rating at +85ºC (34 Volt Rating at +150ºC) T498D335(1)050A(2)E1K1 1.7 6.0 T498D106(1)050A(2)E1K0 5.0 6.0 LAND PATTERN DIMENSIONS FOR REFLOW SOLDER KEMET/ EIA Size Code A/3216-18 B/3528-21 C/6032-28 D/7343-31 X/7343-43 Pad Dimensions Y (Ref) 1.95 1.95 2.55 2.55 2.55 C (Ref) 2.75 3.05 5.05 6.35 6.35 Z 4.70 5.00 7.60 8.90 8.90 G 0.80 1.10 2.50 3.80 3.80 X 1.50 2.50 2.50 2.70 4.40 C X G Z Grid Placement Courtyard Y PACKAGING SPECIFICATIONS Case Codes Tape Width (mm) 8 ± 0.3 8 ± 0.3 Tape & Reel Dimensions Pitch mm ± 0.1 Part Sprocket A B C D X 3216-18 3528-21 8 8 8 8 8 4 4 4 4 4 Reel Quantity 180mm 330mm (7”) (13”) 2000 2000 500 500 500 9000 8000 3000 2500 2000 KEMET EIA 6032-28 12 ± 0.3 7343-31 12 ± 0.3 7343-43 12 ± 0.3 COMPONENT MARKING (HT) KEMET High Temp Rated Voltage Polarity Indicator (+) 227 10K 525 Print Week Code 1st Digit = Year 2nd & 3rd Digits = Week “525” = 25th Week of 2005 Picofarad Code KEMET ID (1) To complete KEMET part number, insert K - ± 10% or M - ±20% capacitance tolerance. (2) To complete KEMET part number, insert T for 100% tin, H for Sn/Pb or G for gold. ** 6 volt product equivalent to 6.3 volt product. Note: Higher voltage ratings, lower ESR and tighter capacitance tolerance product may be substituted within the same size at KEMET’s option. Voltage substitutions will be marked with the higher voltage rating. ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Solid Tantalum Surface Mount TANTALUM AND ALUMINUM CHIP CAPACITORS Packaging Information Tape & Reel Packaging KEMET’s Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-1: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems. Right Hand Orientation Only Embossed Carrier (+) (–) Embossment Top Tape Thickness .10mm (.004") Max Thickness 8mm ±.30 8mm (0.315") (.315 ±.012") or or 12mm (0.472") 12mm ±.30 (.472 ±.012") 178mm (7.00") 180mm (7.0") oror 330mm (13.00") 330mm (13.0") Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. QUANTITIES PACKAGED PER REEL Case Code KEMET EIA R 2012-12 S 3216-12 T 3528-12 U 6032-15 W 7343-15 V 7343-20 A 3216-18 B 3528-21 C 6032-28 D 7343-31 Y 7343-40 X 7343-43 E 7260-38 Tape Width-mm 8 8 8 12 12 12 8 8 12 12 12 12 12 7" Reel* 2,500 2,500 2,500 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 13" Reel* 10,000 10,000 10,000 5,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000 * No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging. * Standard reel packaging is not mandatory. * Bulk packaging also available using C-7610. 92 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Packaging TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg Minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 Newton to 1.0 Newton (10g to 100g) 12 mm 0.1 Newton to 1.3 Newton (10g to 130g) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Reel Sizes: Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13") reels (with C-7280). Note that 13” reels are preferred. 4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. Embossed Carrier Tape Configuration: Figure 1 Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern) Constant Dimensions — Millimeters (Inches) Tape Size 8 mm and 12 mm D0 E P0 4.0 ±0.10 (0.157 ±0.004) P2 2.0 ±0.05 (0.079 ±0.002) T Max 0.600 (0.024) T1 Max 0.100 (0.004) 1.5 1.75 ±0.10 +0.10 -0.0 (0.059 (0.069 ±0.004) +0.004, -0.0) Pitch Single (4 mm) B1 Max. Note 1 4.4 (0.173) 12 mm Double (8 mm) 8.2 (0.323) D1 Min. Note 2 1.0 Variable Dimensions — Millimeters (Inches) Tape Size 8 mm F 3.5 ±0.05 P1 4.0 ±0.10 R Min. Note 3 25.0 T2 Max 2.5 (0.098) W 8.0 ±0.30 (.315 ±0.012) A0B0K0 Note 4 (0.039) (0.138 ±0.002) 1.5 5.5 ±0.05 (0.059) (0.217 ±0.002) (0.157 ±0.004) (0.984) 8.0 ±0.10 30.0 (0.315 ±0.004) (1.181) 4.6 12.0 ±0.30 (0.181) (0.472 ±0.012) NOTES 1. B1 dimension is a reference dimension for tape feeder clearance only. 2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2) 4. The cavity defined by A0, B0, and K0 shall be configured to surround the part with sufficient clearance such that the chip does not protrude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm maximum in the pocket (not applicable to vertical clearance.) 94 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS Packaging Information Embossed Carrier Tape Configuration (cont.) 20° Sketch D: Tape Camber (Top View) 1mm (0.039) Max. 250mm (9.843) Allowable camber to be 1 mm/250 mm. 1mm (0.039) Max. 400mm (15.75) Min. Figure 2: Tape Leader & Trailer Dimensions (Metric Dimensions Will Govern) Figure 3: Reel Dimensions (Metric Dimensions will govern) Table 2 – REEL DIMENSIONS (Metric will govern) Tape Size 8 mm A Max 330.0 (12.992) B* Min 1.5 (0.059) C 13.0 ± 0.20 (0.512 ± 0.008) D* Min 20.2 (0.795) N Min 50.0 (1.969) See Note 3 Table 1 W1 8.4 +1.5, -0.0 (0.331 +0.059, -0.0) 12.4 +2.0, -0.0 (0.488 +0.078, -0.0) W2 Max 14.4 (0.567) W3 7.9 Min (0.311) 10.9 Max (0.429) 11.9 Min (0.469) 15.4 Max (0.606) 12 mm 330.0 (12.992) 1.5 (0.059) 13.0 ± 0.20 (0.512 ± 0.008) 20.2 (0.795) 18.4 (0.724) ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 95 Packaging