Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO2 150°C
Overview
The KEMET T498 is a high temperature product that offers
optimum performance characteristics in applications with
operating temperatures up to 150°C. Advanced materials
and testing allow T498 AUTO to perform with a reliability
level of 0.5%/1000 hours at rated voltage and temperature.
This series is classified as moisture sensitivity level (MSL) 1
under J STD 020: unlimited floorlife time at ≤ 30°C/85% RH.
The T498 is available in five standard EIA case sizes, with
RoHS compliant terminations as standard.
Benefits
• Meets or exceeds EIA standard 535BAAC
• Tape & Reel standard packaging per EIA 481
• Symmetrical, compliant terminations
• Optional gold-plated terminations
• Laser-marked case
• 100% surge current testing
• Complies with AEC–Q200
• 100% steady-state accelerated aging
• Temperature/voltage derating is 2/3 at 150°C
Applications
Typical applications include decoupling and filtering in industrial and automotive end applications such as DC/DC
converters, portable electronics, telecommunications, and control units operating at temperatures up to 150°C.
Environmental Compliance
RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder or gold-plated.
• Halogen-free
• Epoxy compliant with UL94 V–0
• Molded Epoxy complies for outgassing testing under ASTM E 595.
Built Into Tomorrow
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
1
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
K-SIM
For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET's K-SIM software. KEMET
K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.
Ordering Information
T
498
X
227
Capacitor
Class
Series
Case
Size
Capacitance
Code (pF)
A
B
C
D
X
First two digits
represent
significant
figures. Third
digit specifies
number of
zeros.
T=
Tantalum
High
Temperature
150°C
M
010
A
T
E500
Capacitance Rated Voltage Failure Rate/
Termination Finish
Tolerance
(VDC)
Design
K = ±10%
M = ±20%
004 = 4
006 = 6.3
010 = 10
016 = 16
020 = 20
025 = 25
035 = 35
050 = 50
A = N/A
ESR
T = 100% Matte tin
E = ESR
(Sn)-plated
Last three
G = Gold-plated
digits
H = Standard
specify
solder coated
ESR in mΩ
(SnPb 5% Pb
(500 = 500
minimum)
mΩ)
Packaging
(C-Spec)
Blank = 7" reel
7280 = 13" reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
−55°C to 150°C
0.1 – 220 μF at 120 Hz/25°C
K tolerance (10%), M tolerance (20%)
4 – 50 V
DF (120 Hz)
Refer to Part Number Electrical Specification Table
ESR (100 kHz)
Refer to Part Number Electrical Specification Table
Leakage Current
≤ 0.01 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
2
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Qualification
Test
Condition
Characteristics
Δ C/C
Endurance
150°C at 2/3 rated voltage, 2,000 hours
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
Δ C/C
Storage Life
150°C at 0 volts, 2,000 hours
Temperature Stability
MIL–STD–202, Method 107, Condition B, mounted,
−55°C to 150°C, 1,000 cycles
Extreme temperature exposure at a
succession of continuous steps at +25°C,
−55°C, +25°C, +85°C, +150°C, +25°C
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
Mechanical Shock/
Vibration
Within ±5% of initial value
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
+25°C
−55°C
+85°C
+150°C
Δ C/C
IL*
±10%
±10%
±20%
DF
IL
IL
1.5 x IL
1.5 x IL
DCL
IL
N/A
10 x IL
12 x IL
Δ C/C
Surge Voltage
Within ±10% of initial value
DF
Δ C/C
Thermal Shock
Within ±10% of initial value
DF
85°C, 1.32 x rated voltage 1,000 cycles
(150°C, 1.2 x rated voltage)
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000
Hz, 20 G peak
Within ±5% of initial value
DF
Within initial limits
DCL
Within initial limits
ESR
Within initial limits
Δ C/C
Within ±10% of initial value
DF
Within initial limits
DCL
Within initial limits
*IL = Initial Limit
Certification
KEMET’s Internal Qualification Plan for this Tantalum series of capacitors follows AEC–Q200 guidelines.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
3
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Electrical Characteristics
Capacitance vs. Frequency
ESR vs. Frequency
1,000
1,000
100
T498D476M010ATE600
T498D476M010ATE600_IMP
T498X227M010ATE500
100
T498B106M010ATE1K8_ESR
Capacitance (µF)
Impedance, ESR (Ohms)
T498B106M010ATE1K8
T498B106M010ATE1K8_IMP
T498X227M010ATE500_IMP
T498D476M010ATE600_ESR
T498X227M010ATE500_ESR
10
1
0.1
10
1
100
1,000
10,000
100,000
1,000,000
Frequency (Hz)
0.1
10,000,000
100
1,000
10,000
100,000
1,000,000
Frequency (Hz)
10,000,000
Dimensions – Millimeters (Inches)
Metric will govern
CATHODE (-) END VIEW
SIDE VIEW
ANODE (+) END VIEW
BOTTOM VIEW
A
B
B
Glue pad
shape/design at
KEMET's option
E
F
P
T
Termination cutout
at KEMET's option,
either end
S
G
S
Case Size
KEMET
EIA
L
Component
L
W
H
B ±0.15
F ±0.1 S ±0.3
±(0.004) ±(0.012) (Ref) ±0.006
X
(Ref)
P
(Ref)
R
(Ref)
T
(Ref)
A
(Min)
G
(Ref)
E
(Ref)
A
3.2±0.2
1.6±0.2
1.6±0.2
3216–18 (0.126±0.008)
(0.063±0.008) (0.063±0.008)
1.2
(0.047)
0.8
(0.031)
0.4
(0.016)
0.10±0.10
(0.004±0.004)
0.4
(0.016)
0.4
(0.016)
0.13
(0.005)
1.2
(0.047)
1.1
(0.043)
1.3
(0.051)
B
3.5±0.2
2.8±0.2
1.9±0.2
3528–21 (0.138±0.008)
(0.110±0.008) (0.075±0.008)
2.2
(0.087)
0.8
(0.031)
0.4
(0.016)
0.10±0.10
(0.004±0.004)
0.5
(0.020)
1.0
(0.039)
0.13
(0.005)
1.9
(0.075)
1.8
(0.071)
2.2
(0.087)
C
6.0±0.3
3.2±0.3
2.5±0.3
6032–28 (0.236±0.012)
(0.126±0.012) (0.098±0.012)
2.2
(0.087)
1.3
(0.051)
0.5
(0.020)
0.10±0.10
(0.004±0.004)
0.9
(0.035)
1.0
(0.039)
0.13
(0.005)
3.1
(0.122)
2.8
(0.110)
2.4
(0.094)
D
7.3±0.3
4.3±0.3
2.8±0.3
7343–31 (0.287±0.012)
(0.169±0.012) (0.110±0.012)
2.4
(0.094)
1.3
(0.051)
0.5
(0.020)
0.10±0.10
(0.004±0.004)
0.9
(0.035)
1.0
(0.039)
0.13
(0.005)
3.8
(0.150)
3.5
(0.138)
3.5
(0.138)
X
7.3±0.3
4.3±0.3
4.0±0.3
7343–43 (0.287±0.012)
(0.169 ±0.012) (0.157±0.012)
2.4
(0.094)
1.3
(0.051)
0.5
(0.020)
0.10±0.10
(0.004±0.004)
1.7
(0.067)
1.0
(0.039)
0.13
(0.005)
3.8
(0.150)
3.5
(0.138)
3.5
(0.138)
Notes: (Ref) – Dimensions provided for reference only.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
4
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Table 1 – Ratings & Part Number Reference
Rated Rated
Voltage Cap
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
10
10
10
10
10
10
10
10
10
10
10
10
6.8
10
10
15
15
22
22
33
33
47
68
68
100
150
2.2
3.3
4.7
6.8
6.8
10
10
15
15
22
22
33
33
47
47
68
68
100
150
1.5
2.2
3.3
4.7
4.7
6.8
6.8
6.8
10
10
10
10
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
B/3528-21
C/6032-28
B/3528-21
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
B/3528-21
C/6032-28
B/3528-21
C/6032-28
B/3528-21
C/6032-28
C/6032-28
D/7343-31
C/6032-28
D/7343-31
D/7343-31
D/7343-31
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
B/3528-21
A/3216-18
B/3528-21
B/3528-21
C/6032-28
T498A685(1)004A(2)E3K9
T498A106(1)004A(2)E2K9
T498B106(1)004A(2)E2K7
T498A156(1)004A(2)E2K7
T498B156(1)004A(2)E2K6
T498B226(1)004A(2)E1K8
T498C226(1)004A(2)E1K7
T498B336(1)004A(2)E1K5
T498C336(1)004A(2)E1K5
T498C476(1)004A(2)E1K1
T498C686(1)004A(2)E900
T498D686(1)004A(2)E800
T498D107(1)004A(2)E600
T498D157(1)004A(2)E600
T498A225(1)006A(2)E6K5
T498A335(1)006A(2)E4K6
T498A475(1)006A(2)E3K6
T498A685(1)006A(2)E2K9
T498B685(1)006A(2)E2K7
T498A106(1)006A(2)E2K7
T498B106(1)006A(2)E2K1
T498B156(1)006A(2)E1K8
T498C156(1)006A(2)E1K7
T498B226(1)006A(2)E1K5
T498C226(1)006A(2)E1K3
T498B336(1)006A(2)E1K7
T498C336(1)006A(2)E1K1
T498C476(1)006A(2)E800
T498D476(1)006A(2)E800
T498C686(1)006A(2)E800
T498D686(1)006A(2)E600
T498D107(1)006A(2)E600
T498D157(1)006A(2)E500
T498A155(1)010A(2)E6K5
T498A225(1)010A(2)E4K6
T498A335(1)010A(2)E3K6
T498A475(1)010A(2)E2K9
T498B475(1)010A(2)E2K7
T498A685(1)010A(2)E2K7
T498B685(1)010A(2)E2K1
T498B685(1)010A(2)E1K8
T498A106(1)010A(2)E3K4
T498B106(1)010A(2)E1K8
T498B106(1)010A(2)E1K5
T498C106(1)010A(2)E1K7
0.5
0.5
0.5
0.6
0.6
0.9
0.9
1.3
1.3
1.9
2.7
2.7
4.0
6.0
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.9
0.9
1.4
1.4
2.1
2.1
3.0
3.0
4.3
4.3
6.3
9.5
0.5
0.5
0.5
0.5
0.5
0.7
0.7
0.7
1.0
1.0
1.0
1.0
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current (rms)
% at +25°C mΩ at 25°C
mA at
mA at
mA at
120 Hz
100 kHz
+25°C 100 +85°C 100 +125°C 100
Max
Max
kHz
kHz
kHz
4.5
3900
139
125.1
55.6
4.5
2900
161
144.9
64.4
4.5
2700
177
159.3
70.8
4.5
2700
167
150.3
66.8
4.5
2600
181
162.9
72.4
4.5
1800
217
195.3
86.8
4.5
1700
254
228.6
101.6
4.5
1500
238
214.2
95.2
4.5
1500
271
243.9
108.4
4.5
1100
316
284.4
126.4
4.5
900
350
315
140
4.5
800
433
389.7
173.2
6.0
600
500
450
200
6.0
600
500
450
200
4.5
6500
107
96
43
4.5
4600
128
115
51
4.5
3600
144
130
58
4.5
2900
161
145
64
4.5
2700
177
159
71
4.5
2700
167
150
67
4.5
2100
201
181
80
4.5
1800
217
195
87
4.5
1700
254
229
102
4.5
1500
238
214
95
4.5
1300
291
262
116
6.0
1700
224
202
90
4.5
1100
316
284
126
4.5
800
371
334
148
4.5
800
433
390
173
4.5
800
371
334
148
4.5
600
500
450
200
6.0
600
500
450
200
6.0
500
548
493
219
6500
107
96
43
4.5
4.5
4600
128
115
51
4.5
3600
144
130
58
4.5
2900
161
145
64
4.5
2700
177
159
71
4.5
2700
167
150
67
4.5
2100
201
181
80
4.5
1800
217
195
87
4.5
3400
149
134
60
4.5
1800
217
195
87
4.5
1500
238
214
95
4.5
1700
254
229
102
% at +25°C mΩ at 25°C
mA at
mA at
mA at
120 Hz
100 kHz
+25°C 100 +85°C 100 +125°C 100
Max
Max
kHz
kHz
kHz
DF
ESR
Maximum Allowable
Ripple Current (rms)
Maximum
Operating
Temp
°C
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
°C
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260°C
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum).
Designates Termination Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
5
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Table 1 – Ratings & Part Number Reference cont.
Rated Rated
Voltage Cap
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
10
10
10
10
10
10
10
10
10
10
10
10
10
10
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
15
15
15
22
22
33
33
47
47
47
68
100
150
220
1
1.5
2.2
3.3
3.3
4.7
4.7
4.7
6.8
6.8
6.8
6.8
10
10
10
10
15
22
22
22
22
33
33
33
33
47
47
47
47
68
100
B/3528-21
B/3528-21
C/6032-28
B/3528-21
C/6032-28
C/6032-28
D/7343-31
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
B/3528-21
A/3216-18
A/3216-18
B/3528-21
C/6032-28
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
B/3528-21
C/6032-28
C/6032-28
D/7343-31
C/6032-28
D/7343-31
D/7343-31
D/7343-31
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
X/7343-43
T498B156(1)010A(2)E1K5
T498B156(1)010A(2)E650
T498C156(1)010A(2)E1K4
T498B226(1)010A(2)E1K5
T498C226(1)010A(2)E1K1
T498C336(1)010A(2)E900
T498D336(1)010A(2)E800
T498C476(1)010A(2)E800
T498C476(1)010A(2)E350
T498D476(1)010A(2)E600
T498D686(1)010A(2)E600
T498D107(1)010A(2)E600
T498X157(1)010A(2)E500
T498X227(1)010A(2)E500
T498A105(1)016A(2)E6K5
T498A155(1)016A(2)E5K2
T498A225(1)016A(2)E4K3
T498A335(1)016A(2)E3K4
T498B335(1)016A(2)E3K0
T498A475(1)016A(2)E3K0
T498B475(1)016A(2)E2K1
T498B475(1)016A(2)E1K0
T498A685(1)016A(2)E2K0
T498A685(1)016A(2)E2K6
T498B685(1)016A(2)E1K8
T498C685(1)016A(2)E1K7
T498B106(1)016A(2)E2K8
T498B106(1)016A(2)E1K5
T498C106(1)016A(2)E1K4
T498C106(1)016A(2)E800
T498C156(1)016A(2)E1K1
T498B226(1)016A(2)E1K9
T498C226(1)016A(2)E1K0
T498C226(1)016A(2)E400
T498D226(1)016A(2)E800
T498C336(1)016A(2)E900
T498D336(1)016A(2)E700
T498D336(1)016A(2)E600
T498D336(1)016A(2)E230
T498C476(1)016A(2)E800
T498C476(1)016A(2)E500
T498D476(1)016A(2)E600
T498D476(1)016A(2)E450
T498D686(1)016A(2)E600
T498X107(1)016A(2)E075
1.5
1.5
1.5
2.2
2.2
3.3
3.3
4.7
4.7
4.7
6.8
10.0
15.0
22.0
0.5
0.5
0.5
0.5
0.5
0.8
0.8
0.8
1.1
1.1
1.1
1.1
1.6
1.6
1.6
1.6
2.4
3.5
3.5
3.5
3.5
5.3
5.3
5.3
5.3
7.5
7.5
7.5
7.5
10.9
16.0
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current (rms)
% at +25°C mΩ at 25°C
mA at
mA at
mA at
120 Hz
100 kHz
+25°C 100 +85°C 100 +125°C 100
Max
Max
kHz
kHz
kHz
4.5
1500
238
214
95
4.5
650
362
326
145
4.5
1400
280
252
112
6.0
1500
238
214
95
4.5
1100
316
284
126
4.5
900
350
315
140
4.5
800
433
390
173
4.5
800
371
334
148
4.5
350
561
505
224
4.5
600
500
450
200
4.5
600
500
450
200
6.0
600
500
450
200
6.0
500
574
517
230
9.0
500
574
517
230
3.0
6500
107
96
43
4.5
5200
120
108
48
4.5
4300
132
119
53
4.5
3400
149
134
60
4.5
3000
168
151
67
4.5
3000
158
142
63
4.5
2100
201
181
80
4.5
1000
292
263
117
4.5
2000
194
175
78
4.5
2600
170
153
68
4.5
1800
217
195
87
4.5
1700
254
229
102
4.5
2800
174
157
70
4.5
1500
238
214
95
4.5
1400
280
252
112
4.5
800
371
334
148
4.5
1100
316
284
126
6.0
1900
212
191
85
4.5
1000
332
299
133
400
524
472
210
4.5
4.5
800
433
390
173
4.5
900
350
315
140
4.5
700
463
417
185
4.5
600
500
450
200
4.5
230
808
727
323
4.5
800
371
334
148
4.5
500
469
422
188
4.5
600
500
450
200
4.5
450
577
519
231
4.5
600
500
450
200
6
75
1483
1335
593
% at +25°C mΩ at 25°C
mA at
mA at
mA at
120 Hz
100 kHz
+25°C 100 +85°C 100 +125°C 100
Max
Max
kHz
kHz
kHz
DF
ESR
Maximum Allowable
Ripple Current (rms)
Maximum
Operating
Temp
°C
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
°C
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260°C
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum).
Designates Termination Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
6
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Table 1 – Ratings & Part Number Reference cont.
Rated Rated
Voltage Cap
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
0.68
1
1.5
2.2
3.3
4.7
4.7
6.8
6.8
10
15
15
22
33
33
0.47
0.68
1
1.5
2.2
3.3
4.7
6.8
6.8
10
10
10
10
15
22
33
0.1
0.15
0.22
0.33
0.47
0.47
0.68
1
1
1.5
2.2
3.3
4.7
4.7
6.8
A/3216-18
A/3216-18
A/3216-18
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
A/3216-18
A/3216-18
A/3216-18
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
D/7343-31
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
A/3216-18
A/3216-18
A/3216-18
A/3216-18
A/3216-18
B/3528-21
B/3528-21
A/3216-18
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
T498A684(1)020A(2)E7K8
T498A105(1)020A(2)E5K9
T498A155(1)020A(2)E5K2
T498B225(1)020A(2)E3K6
T498B335(1)020A(2)E2K7
T498B475(1)020A(2)E1K9
T498C475(1)020A(2)E1K7
T498C685(1)020A(2)E1K3
T498C685(1)020A(2)E450
T498C106(1)020A(2)E1K1
T498C156(1)020A(2)E1K0
T498D156(1)020A(2)E900
T498D226(1)020A(2)E700
T498D336(1)020A(2)E600
T498D336(1)020A(2)E450
T498A474(1)025A(2)E8K5
T498A684(1)025A(2)E6K5
T498A105(1)025A(2)E5K2
T498B155(1)025A(2)E4K2
T498B225(1)025A(2)E3K0
T498C335(1)025A(2)E2K0
T498C475(1)025A(2)E1K6
T498C685(1)025A(2)E1K4
T498D685(1)025A(2)E1K1
T498C106(1)025A(2)E800
T498C106(1)025A(2)E1K1
T498C106(1)025A(2)E1K8
T498D106(1)025A(2)E1K0
T498D156(1)025A(2)E700
T498D226(1)025A(2)E600
T498D336(1)025A(2)E600
T498A104(1)035A(2)E28K
T498A154(1)035A(2)E23K
T498A224(1)035A(2)E15K
T498A334(1)035A(2)E11K
T498A474(1)035A(2)E10K
T498B474(1)035A(2)E8K0
T498B684(1)035A(2)E5K5
T498A105(1)035A(2)E10K
T498B105(1)035A(2)E4K4
T498C155(1)035A(2)E3K3
T498C225(1)035A(2)E2K2
T498C335(1)035A(2)E1K7
T498C475(1)035A(2)E1K3
T498D475(1)035A(2)E1K0
T498D685(1)035A(2)E900
0.5
0.5
0.5
0.5
0.7
0.9
0.9
1.4
1.4
2.0
3.0
3.0
4.4
6.6
6.6
0.5
0.5
0.5
0.5
0.6
0.8
1.2
1.7
1.7
2.5
2.5
2.5
2.5
3.8
5.5
8.3
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
1.2
1.6
1.6
2.4
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current (rms)
% at +25°C mΩ at 25°C
mA at
mA at
mA at
120 Hz
100 kHz
+25°C 100 +85°C 100 +125°C 100
Max
Max
kHz
kHz
kHz
3.0
7800
98
88
39
3.0
5900
113
102
45
4.5
5200
120
108
48
4.5
3600
154
139
62
4.5
2700
177
159
71
4.5
1900
212
191
85
4.5
1700
254
229
102
4.5
1300
291
262
116
4.5
450
494
445
198
4.5
1100
316
284
126
4.5
1000
332
299
133
4.5
900
408
367
163
4.5
700
463
417
185
4.5
600
500
450
200
4.5
450
577
519
231
3.0
8500
94
85
38
3.0
6500
107
96
43
3.0
5200
120
108
48
4.5
4200
142
128
57
4.5
3000
168
151
67
4.5
2000
235
212
94
4.5
1600
262
236
105
4.5
1400
280
252
112
4.5
1100
369
332
148
4.5
800
371
334
148
4.5
1100
316
284
126
4.5
1800
247
222
99
4.5
1000
387
348
155
4.5
700
463
417
185
4.5
600
500
450
200
6.0
600
500
450
200
3.0
28000
52
47
21
3.0
23000
57
51
23
15000
71
64
28
3.0
3.0
11000
83
75
33
3.0
10000
87
78
35
3.0
8000
103
93
41
3.0
5500
124
112
50
4.0
10000
87
78
35
3.0
4400
139
125
56
4.5
3300
183
165
73
4.5
2200
224
202
90
4.5
1700
254
229
102
4.5
1300
291
262
116
4.5
1000
387
348
155
4.5
900
408
367
163
% at +25°C mΩ at 25°C
mA at
mA at
mA at
120 Hz
100 kHz
+25°C 100 +85°C 100 +125°C 100
Max
Max
kHz
kHz
kHz
DF
ESR
Maximum Allowable
Ripple Current (rms)
Maximum
Operating
Temp
°C
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
°C
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260°C
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum).
Designates Termination Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
7
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Table 1 – Ratings & Part Number Reference cont.
Rated Rated
Voltage Cap
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
35
35
35
35
35
35
35
35
35
35
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
10
10
15
15
22
22
22
33
47
47
0.1
0.15
0.22
0.33
0.47
0.68
1
1.5
2.2
3.3
4.7
4.7
6.8
6.8
10
10
10
D/7343-31
D/7343-31
D/7343-31
X/7343-43
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
A/3216-18
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
D/7343-31
X/7343-43
X/7343-43
T498D106(1)035A(2)E700
T498D106(1)035A(2)E440
T498D156(1)035A(2)E700
T498X156(1)035A(2)E500
T498D226(1)035A(2)E700
T498X226(1)035A(2)E500
T498X226(1)035A(2)E440
T498X336(1)035A(2)E500
T498X476(1)035A(2)E500
T498X476(1)035A(2)E350
T498A104(1)050A(2)E27K
T498B154(1)050A(2)E22K
T498B224(1)050A(2)E15K
T498B334(1)050A(2)E11K
T498C474(1)050A(2)E6K5
T498C684(1)050A(2)E5K5
T498C105(1)050A(2)E3K3
T498D155(1)050A(2)E2K8
T498D225(1)050A(2)E2K0
T498D335(1)050A(2)E1K1
T498D475(1)050A(2)E900
T498D475(1)050A(2)E480
T498D685(1)050A(2)E700
T498X685(1)050A(2)E500
T498D106(1)050A(2)E1K0
T498X106(1)050A(2)E500
T498X106(1)050A(2)E1K0
3.5
3.5
5.3
5.3
7.7
7.7
7.7
11.6
16.5
16.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
1.1
1.7
2.4
2.4
3.4
3.4
5.0
5.0
5.0
VDC at 85°C
µF
KEMET/EIA
(See below for
part options)
µA at +25°C
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part Number
DC
Leakage
DF
ESR
Maximum Allowable
Ripple Current (rms)
% at +25°C mΩ at 25°C
mA at
mA at
mA at
120 Hz
100 kHz
+25°C 100 +85°C 100 +125°C 100
Max
Max
kHz
kHz
kHz
4.5
700
463
417
185
4.5
440
584
526
234
6.0
700
463
417
185
4.5
500
574
517
230
6.0
700
463
417
185
4.5
500
574
517
230
4.5
440
612
551
245
6.0
500
574
517
230
6.0
500
574
517
230
6.0
350
687
618
275
3.0
27000
53
48
21
3.0
22000
62
56
25
3.0
15000
75
68
30
3.0
11000
88
79
35
3.0
6500
130
117
52
3.0
5500
141
127
56
3.0
3300
183
165
73
4.5
2800
231
208
92
4.5
2000
274
247
110
4.5
1100
369
332
148
4.5
900
408
367
163
4.5
480
559
503
224
6.0
700
463
417
185
4.5
500
574
517
230
6.0
1000
387
348
155
4.5
500
574
517
230
4.5
1000
406
365
162
% at +25°C mΩ at 25°C
mA at
mA at
mA at
120 Hz
100 kHz
+25°C 100 +85°C 100 +125°C 100
Max
Max
kHz
kHz
kHz
DF
ESR
Maximum Allowable
Ripple Current (rms)
Maximum
Operating
Temp
°C
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
°C
Maximum
Operating
Temp
MSL
Reflow
Temp
≤ 260°C
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reflow
Temp
≤ 260°C
MSL
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-Plated, G = Gold-Plated, H = Standard Solder coated (SnPb 5% Pb minimum).
Designates Termination Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
8
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Recommended Voltage Derating Guidelines
Working Voltage
85°C
4
6.3
10
16
20
25
35
50
4
6.3
10
16
20
25
35
50
150°C
2.68
4.22
6.70
10.72
13.40
16.75
23.45
33.50
85°C
2
3.15
5
8
10
12.5
17.5
25
150°C
1.32
2.08
3.30
5.28
6.60
8.25
11.55
16.50
1.2
1
% Working Voltage
Rated
Voltage
Recommended
Application Voltage (for
maximum reliability)
0.8
% Change in Working DC Voltage with
Temperature
67%
0.6
0.4
0.2
33%
Recommended Maximum Application
Voltage (As % of Rated Voltage)
0
−55
25
85
125
150
Temperature (°C)
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to
equivalent series resistance (ESR) and the power dissipation
capabilities of the device. Permissible AC ripple voltage
which may be applied is limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage,
if any, must not exceed the DC voltage rating of the
capacitor.
2. The negative peak AC voltage in combination with
bias voltage, if any, must not exceed the allowable limits
specified for reverse voltage. See the Reverse Voltage
section for allowable limits.
The maximum power dissipation by case size can be
determined using the table at right. The maximum power
dissipation rating stated in the table must be reduced with
increasing environmental operating temperatures. Refer to
the table below for temperature compensation requirements.
Temperature Compensation Multipliers
for Maximum Ripple Current
T ≤ 25°C
1.00
T ≤ 85°C
0.90
T ≤ 125°C
0.40
T ≤ 150°C
0.30
T= Environmental Temperature
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature
Compensation Multiplier table for details.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
KEMET Series
and Case Code
EIA
Case Code
Maximum Power
Dissipation
(P max) mWatts
at 25°C with
+20°C Rise
A
3216–18
75
B
C
D
X
E
S
T
U
V
T510X
T510E
3528–21
6032–28
7343–31
7343–43
7360–38
3216–12
3528–12
6032–15
7343–20
7343–43
7360–38
85
110
150
165
200
60
70
90
125
270
285
Using the P max of the device, the maximum allowable rms
ripple current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
Z = Impedance at specified frequency (ohms)
T2053_T498_AUTO • 12/7/2023
9
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong
polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small
degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated
continuously in reverse mode, even within these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
85°C
125°C
15% of Rated Voltage
5% of Rated Voltage
1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
3528–21
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–28
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
7343–31
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X1
7343–43
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow
solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform
qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
1
2
Height of these chips may create problems in wave soldering.
Land pattern geometry is too small for silkscreen outline.
V1
L
L
W
W
V2
S
Grid Placement Courtyard
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
10
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Soldering Process
Please note that although the X/7343–43 case size can
withstand wave soldering, the tall profile (4.3 mm maximum)
dictates care in wave process development.
Hand soldering should be performed with care due to the
difficulty in process control. If performed, care should be
taken to avoid contact of the soldering iron to the molded
case. The iron should be used to heat the solder pad,
applying solder between the pad and the termination, until
reflow occurs. Once reflow occurs, the iron should be
removed immediately. “Wiping” the edges of a chip and
heating the top surface is not recommended.
During typical reflow operations, a slight darkening of the
gold-colored epoxy may be observed. This slight darkening is
normal and not harmful to the product. Marking permanency
is not affected by this change.
Profile Feature
SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin)
100°C
150°C
Temperature Maximum (TSmax)
150°C
200°C
Time (t s) from Tsmin to Tsmax)
60 – 120 seconds
60 – 120 seconds
Ramp-up Rate (TL to TP)
3°C/second maximum
3°C/second maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t L)
60 – 150 seconds
220°C*
235°C**
60 – 150 seconds
250°C*
260°C**
20 seconds maximum
30 seconds maximum
6°C/second maximum
6°C/second maximum
6 minutes maximum
8 minutes maximum
Peak Temperature (TP)
Time within 5°C of Maximum
Peak Temperature (t P)
Ramp-down Rate (TP to TL)
Time 25°C to Peak
Temperature
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
* For Case Size height > 2.5 mm
** For Case Size height ≤ 2.5 mm
TP
TL
Temperature
The KEMET families of surface mount capacitors are
compatible with wave (single or dual), convection, IR,
or vapor phase reflow techniques. Preheating of these
components is recommended to avoid extreme thermal
stress. KEMET's recommended profile conditions for
convection and IR reflow reflect the profile conditions of the
IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three reflow
passes at these conditions.
tP
Maximum Ramp Up Rate = 3°C/second
Maximum Ramp Down Rate = 6°C/second
tL
Tsmax
Tsmin
25
ts
25°C to Peak
Time
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in
other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,
and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp
and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40°C and maximum
storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation
on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip
stock should be used promptly, preferably within three years of receipt.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
11
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Construction
Polarity Stripe (+)
Molded Epoxy
Case
Detailed Cross Section
Silver Paint
(Fourth Layer)
Polarity
Bevel (+)
Tantalum Wire
Leadframe
(− Cathode)
Washer
Tantalum Wire
Weld
(to attach wire)
Carbon
(Third Layer)
Silver Adhesive
Leadframe
(+ Anode)
Molded Epoxy
Case
MnO2
(Second Layer)
Washer
Ta2O5 Dielectric
(First Layer)
Tantalum
Capacitor Marking
Date Code *
KEMET
Industrial
Grade MnO2
1st digit = last number of year
8 = 2018
9 = 2019
0 = 2020
1 = 2021
2 = 2022
2nd and 3rd digit = week of the
year
01 = 1st week of the year to
52 = 52nd week of the year
Polarity
Indicator (+)
Picofarad
Code
KEMET
ID
Rated
Voltage
Date
Code*
* 301 = 1st week of 2023
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
12
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Tape & Reel Packaging Information
KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with
EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system
is compatible with all tape-fed automatic pick-and-place systems.
Right hand
orientation
only
(+)
Embossed carrier
(−)
Embossment
Top tape thickness
0.10 mm (0.004”)
maximum thickness
180 mm (7.0”) or
330 mm (13.”)
8 mm (0.315”) or
12 mm (0.472”)
Table 3 – Packaging Quantity
Case Code
KEMET
S
T
M
U
L
W
Z
V
A
B
C
D
Q
Y
X
E/T428P
H
O
EIA
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-12
7343-40
7343-43
7360-38
7360-20
7360-43
Tape Width
(mm)
7" Reel*
13" Reel*
8
8
8
12
12
12
12
12
8
8
12
12
12
12
12
12
12
12
2,500
3,000
2,500
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
500
1,000
500
500
500
1,000
250
10,000
10,000
8,000
5,000
3,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
3,000
2,000
2,000
2,000
2,500
1,000
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
13
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
P2
T
T2
ØD0
P0
(10 pitches cumulative
tolerance on tape ±0.2 mm)
A0
E1
F
K0
B1
E2
B0
S1
W
P1
T1
Center Lines of Cavity
B1 is for tape feeder reference only,
including draft concentric about B0.
Embossment
For cavity size,
see Note 1, Table 4
ØD1
Cover Tape
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
12 mm
D1 Minimum
Note 1
D0
1.5 +0.10/−0.0
(0.059 +0.004/−0.0)
1.0
(0.039)
1.5
(0.059)
E1
P0
R Reference S1 Minimum
T1
T Maximum
Note 2
Note 3
Maximum
P2
1.75 ±0.10
4.0 ±0.10
2.0 ±0.05
(0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002)
25.0
(0.984)
30
(1.181)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
Variable Dimensions — Millimeters (Inches)
Tape Size
Pitch
B1 Maximum
Note 4
8 mm
Single (4 mm)
4.35
(0.171)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
4.0 ±0.10
(0.157 ±0.004)
2.5
(0.098)
8.3
(0.327)
12 mm
Single (4 mm)
and Double
(8 mm)
8.2
(0.323)
10.25
(0.404)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
12.3
(0.484)
E2 Minimum
F
P1
T2 Maximum W Maximum A0, B0 & K0
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
14
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Packaging Information Performance Notes
1. Cover tape break force: 1.0 kg minimum.
2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 to 1.0 newton (10 to 100 gf)
12 mm
0.1 to 1.3 newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be
165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of
300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Width (mm)
8, 12
Bo
Maximum
Rotation (
20
°
T)
Typical Component Centerline
°
s
Tape
Maximum
Width (mm) Rotation (
8, 12
20
°
S)
Ao
Figure 3 – Maximum Lateral Movement
8 mm & 12 mm Tape
0.5 mm maximum
0.5 mm maximum
Figure 4 – Bending Radius
Embossed
Carrier
Punched
Carrier
R
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Bending
Radius
R
T2053_T498_AUTO • 12/7/2023
15
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Figure 5 – Reel Dimensions
Full Radius,
See Note
W3
(Includes
flange distortion
at outer edge)
Access Hole at
Slot Location
(Ø 40 mm minimum)
W2
D
A
(See Note)
N
C
(Arbor hole
diameter)
B
(see Note)
(Measured at hub)
W1
(Measured at hub)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
A
B Minimum
C
D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/−0.2
(0.521 +0.02/−0.008)
20.2
(0.795)
12 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
12 mm
N Minimum
W1
W2 Maximum
W3
50
(1.969)
8.4 +1.5/−0.0
(0.331 +0.059/−0.0)
12.4 +2.0/−0.0
(0.488 +0.078/−0.0)
14.4
(0.567)
18.4
(0.724)
Shall accommodate tape
width without interference
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
16
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Punched Carrier
8 mm & 12 mm only
END
Carrier Tape
Round Sprocket Holes
START
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
Trailer
160 mm minimum
Components
100 mm
minimum Leader
400 mm minimum
Top Cover Tape
Figure 7 – Maximum Camber
Elongated Sprocket Holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
17
Tantalum Surface Mount Capacitors – Automotive Grade
T498 Automotive Grade MnO 2 150°C
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offices, please visit www.kemet.com/sales.
Disclaimer
YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight.
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2053_T498_AUTO • 12/7/2023
18
工商网监
湘ICP备2023018690号
