Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Overview
The KEMET T498 Series is a high temperature product that
offers optimum performance characteristics in applications
with operating temperatures up to 150°C. Advanced materials
and testing allow this series to perform with a reliability level of
0.5%/1,000 hours at rated voltage and temperature. The T498
Series is available in five standard EIA case sizes with RoHS
compliant terminations as standard.
Benefits
Applications
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Typical applications include decoupling and filtering in industrial
and automotive end applications such as DC/DC converters,
portable electronics, telecommunications, and control units
operating at temperatures up to 150°C.
Meets or exceeds EIA Standard 535BAAC
Taped and reeled per EIA 481–1
Symmetrical, compliant terminations
Optional gold-plated terminations
Laser-marked case
100% surge current testing
Complies with AEC–Q200
Capacitance values of 0.47 μF to 220 μF
Tolerances of ±10% and ±20%
Voltage rating of 6 – 50 VDC
100% steady-state accelerated aging
Temperature/voltage derating is 2/3 at 150°C
RoHS Compliant and lead-free terminations standard
Operating temperature range of -55˚C to +150˚C
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
SPICE
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
1
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Ordering Information
T
498
X
227
M
010
Capacitor
Class
Series
Case Size
Capacitance
Code (pF)
Capacitance
Tolerance
Voltage
High
Temperature
150ºC
A, B, C, D, X
First two digits
represent
significant
figures. Third
digit specifies
number of
zeros.
K = ±10%
M = ±20%
T=
Tantalum
A
T
Failure Rate/
Lead Material
Design
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
Z = N/A
T = 100%
Matte Tin (Sn)
Plated
G = Gold
Plated
E800
ESR
Last three
digits specify
ESR in mΩ.
(800 = 800
mΩ)
Packaging
(C-Spec)
Blank = 7" Reel
7280 = 13" Reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
-55°C to 150°C
0.33 – 220 μF @ 120 Hz/25°C
K Tolerance (10%), M Tolerance (20%)
6 – 50 V
DF (120 Hz)
Refer to Part Number Electrical Specification Table
ESR (100 kHz)
Refer to Part Number Electrical Specification Table
Leakage Current
≤ 0.01 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
2
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Qualification
Test
Condition
Characteristics
ΔC/C
Endurance
Storage Life
Thermal Shock
Temperature Stability
150°C @ 2/3 rated voltage, 2,000 hours
150°C @ 0 volts, 2,000 hours
MIL–STD–202, Method 107, Condition B, mounted, -55°C to
150°C, 1,000 cycles
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +85ºC, +150ºC, +25ºC
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
ΔC/C
Within ±10% of initial value
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
ΔC/C
Within ±5% of initial value
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
+25°C
-55°C
+85°C
+150°C
ΔC/C
IL*
±10%
±10%
±20%
DF
IL
IL
1.5 x IL
1.5 x IL
DCL
IL
n/a
10 x IL
12 x IL
ΔC/C
Surge Voltage
Mechanical Shock/Vibration
Within ±10% of initial value
25°C and 85°C, 1.32 x rated voltage 1,000 cycles
(150°C, 1.2 x rated voltage)
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Within ±5% of initial value
DF
Within initial limits
DCL
Within initial limits
ESR
Within initial limits
ΔC/C
Within ±10% of initial value
DF
Within initial limits
DCL
Within initial limits
*IL = Initial Limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
3
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Electrical Characteristics
Capacitance vs. Frequency
ESR vs. Frequency
1000
1000
100
T498D476M010ATE600
T498D476M010ATE600_IMP
T498X227M010ATE500
100
T498B106M010ATE1K8_ESR
Capacitance (µF)
Impedance, ESR (Ohms)
T498B106M010ATE1K8
T498B106M010ATE1K8_IMP
T498X227M010ATE500_IMP
T498D476M010ATE600_ESR
T498X227M010ATE500_ESR
10
1
0.1
10
1
100
1,000
10,000
100,000
1,000,000
Frequency (Hz)
0.1
10,000,000
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
Dimensions – Millimeters (Inches)
Metric will govern
Termination
cutout at
KEMET’s
option,
either end
Case Size
KEMET
EIA
A
3216–18
B
3528–21
C
6032–28
D
7343–31
X
7343–43
Component
L*
W*
H*
3.2 ±0.2
(0.126 ±0.008)
3.5 ±02
(0.138 ±0.008)
6.0 ±0.3
(0.236 ±0.03)
7.3 ±0.3
(0.287 ±0.012)
7.3 ±0.3
(0.287 ±0.012)
1.6 ±0.2
(0.063 ±0.008)
2.8 ±0.2
(0.110 ±0.008)
3.2 ±0.3
(0.126 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
1.6 ±0.2
(0.063 ±0.008)
1.9 ±0.2
(0.075 ±0.008)
2.5 ±0.3
(0.098 ±0.012)
2.8 ±0.3
(0.110 ±0.012)
4.0 ±0.3
(0.157 ±0.012)
F* ±0.1 S* ±0.3 B* ±0.15
±(.004) ±(.012) (Ref) ±.006
1.2 (.047)
0.8 (.031)
0.4 (.016)
2.2 (.087)
0.8 (.031)
0.4 (.016)
2.2 (.087)
1.3 (.051)
0.5 (.020)
2.4 (.094)
1.3 (.051)
0.5 (.020)
2.4 (.094)
1.3 (.051)
0.5 (.020)
X (Ref)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
P (Ref)
R (Ref)
T (Ref)
A (Min) G (Ref) E (Ref)
0.4 (.016)
0.4 (.016)
0.13 (.005)
0.5 (.020)
1.0 (.039)
0.13 (.005) 1.1 (0.043) 1.8 (.071) 2.2 (.087)
0.9 (.035)
1.0 (.039)
0.13 (.005)
2.5(.098)
2.8 (.110) 2.4 (.094)
0.9 (.035)
1.0 (.039)
0.13 (.005)
3.8 (.150)
3.5 (.138) 3.5 (.138)
1.7 (.067)
1.0 (.039)
0.13 (.005)
3.8 (.150)
3.5 (.138) 3.5 (.138)
0.8 (.31)
1.1 (.043) 1.3 (.051)
Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch.
* MIL–PRF–55365/8 specified dimensions
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
4
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Table 1 – Ratings & Part Number Reference
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DC
Leakage
µA +20ºC
Max/5 Min
0.6
0.9
1.4
2.1
3.0
6.3
DF
Maximum Allowable
Ripple Current
ESR
VDC
µF
KEMET/EIA
6.3
6.3
6.3
6.3
6.3
6.3
10
15
22
33
47
100
B/3528-21
B/3528-21
C/6032-28
B/3528-21
C/6032-28
D/7343-31
(See below for
part options)
T498B106(1)006A(2)E2K1
T498B156(1)006A(2)E1K8
T498C226(1)006A(2)E1K3
T498B336(1)006A(2)E1K7
T498C476(1)006A(2)E800
T498D107(1)006A(2)E600
% @ +20ºC mΩ @ 20ºC (mA) 100 kHz
120 Hz Max 100 kHz Max
25ºC
6.0
2100
201
6.0
1800
217
6.0
1300
291
6.0
1700
224
6.0
800
371
8.0
600
500
10
10
10
10
10
10
10
10
10
10
10
10
2.2
3.3
4.7
4.7
10
15
15
22
22
47
100
220
A/3216-18
A/3216-18
A/3216-18
B/3528-21
B/3528-21
B/3528-21
C/6032-28
B/3528-21
C/6032-28
D/7343-31
D/7343-31
X/7343-43
T498A225(1)010A(2)E4K6
T498A335(1)010A(2)E3K6
T498A475(1)010A(2)E2K9
T498B475(1)010A(2)E2K7
T498B106(1)010A(2)E1K8
T498B156(1)010A(2)E1K5
T498C156(1)010A(2)E1K8
T498B226(1)010A(2)E1K5
T498C226(1)010A(2)E1K1
T498D476(1)010A(2)E600
T498D107(1)010A(2)E600
T498X227(1)010A(2)E500
0.5
0.5
0.5
0.5
1.0
1.5
1.5
2.2
2.2
4.7
10.0
22.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
4600
3600
2900
2700
1800
1500
1800
1500
1100
600
600
500
16
16
16
16
16
16
16
16
16
16
16
16
16
1
3.3
4.7
6.8
6.8
10
10
15
22
33
47
68
100
A/3216-18
A/3216-18
B/3528-21
A/3216-18
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
X/7343-43
T498A105(1)016A(2)E6K5
T498A335(1)016A(2)E3K4
T498B475(1)016A(2)E2K1
T498A685(1)016A(2)E2K6
T498B685(1)016A(2)E1K8
T498B106(1)016A(2)E2K8
T498C106(1)016A(2)E1K4
T498C156(1)016A(2)E1K1
T498C226(1)016A(2)E1K0
T498D336(1)016A(2)E600
T498D476(1)016A(2)E600
T498D686(1)016A(2)E600
T498X107(1)016A(2)E100
0.5
0.5
0.8
1.1
1.1
1.6
1.6
2.4
3.5
5.3
7.5
10.9
16.0
4.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
20
20
1
10
A/3216-18
C/6032-28
T498A105(1)020A(2)E5K9
T498C106(1)020A(2)E1K1
0.5
2.0
25
25
25
25
25
25
25
0.47
2.2
10
10
15
22
33
A/3216-18
B/3528-21
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
T498A474(1)025A(2)E8K5
T498B225(1)025A(2)E3K0
T498C106(1)025A(2)E1K1
T498D106(1)025A(2)E1K0
T498D156(1)025A(2)E700
T498D226(1)025A(2)E600
T498D336(1)025A(2)E600
0.5
0.6
2.5
2.5
3.8
5.5
8.3
35
35
35
35
35
0.33
1
1.5
3.3
6.8
A/3216-18
A/3216-18
C/6032-28
C/6032-28
D/7343-31
VDC
µF
KEMET/EIA
T498A334(1)035A(2)E11K
T498A105(1)035A(2)E10K
T498C155(1)035A(2)E3K3
T498C335(1)035A(2)E1K7
T498D685(1)035A(2)E900
(See below for
part options)
0.5
0.5
0.5
1.2
2.4
µA +20ºC
Max/5 Min
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage
Moisture
Sensitivity
(mA) 100 kHz
85ºC
181
195
262
202
334
450
(mA) 100 kHz
125ºC
80
87
116
90
148
200
Reflow Temp
≤ 260ºC
1
1
1
1
1
1
128
144
161
177
217
238
247
238
316
500
500
574
115
130
145
159
195
214
222
214
284
450
450
517
51
58
64
71
87
95
99
95
126
200
200
230
1
1
1
1
1
1
1
1
1
1
1
1
6500
3400
2100
2600
1800
2800
1400
1100
1000
600
600
600
100
107
149
201
170
217
174
280
316
332
500
500
500
1285
96
134
181
153
195
157
252
284
299
450
450
450
1157
43
60
80
68
87
70
112
126
133
200
200
200
514
1
1
1
1
1
1
1
1
1
1
1
1
1
0.5
2.0
5900
1100
113
316
102
284
45
126
1
1
4.0
6.0
6.0
6.0
6.0
6.0
6.0
8500
3000
1100
1000
700
600
600
94
168
316
387
463
500
500
85
151
284
348
417
450
450
38
67
126
155
185
200
200
1
1
1
1
1
1
1
75
78
165
229
367
(mA) 100 kHz
85ºC
33
35
73
102
163
(mA) 100 kHz
125ºC
1
1
1
1
1
Reflow Temp
≤ 260ºC
4.0
11000
83
4.0
10000
87
6.0
3300
183
6.0
1700
254
6.0
900
408
% @ +20ºC mΩ @ 20ºC (mA) 100 kHz
120 Hz Max 100 kHz Max
25ºC
DF
ESR
Maximum Allowable
Ripple Current
Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated. Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Roll Over for
Order Info.
T2012_T498 • 3/15/2013
5
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated Case Code/
Cap
Case Size
KEMET Part
Number
DC
Leakage
(See below for
part options)
T498D106(1)035A(20E700
T498X226(1)035A(2)E500
T498X336(1)035A(2)E500
µA +20ºC
Max/5 Min
3.5
7.7
11.6
% @ +20ºC mΩ @ 20ºC (mA) 100 kHz
120 Hz Max 100 kHz Max
25ºC
6.0
700
463
6.0
500
574
6.0
500
574
(mA) 100 kHz
85ºC
417
517
517
(mA) 100 kHz
125ºC
185
230
230
Reflow Temp
≤ 260ºC
1
1
1
1.7
5.0
µA +20ºC
Max/5 Min
6.0
1100
369
6.0
1000
387
% @ +20ºC mΩ @ 20ºC (mA) 100 kHz
120 Hz Max 100 kHz Max
25ºC
332
348
(mA) 100 kHz
85ºC
148
155
(mA) 100 kHz
125ºC
1
1
Reflow Temp
≤ 260ºC
DC
Leakage
VDC
µF
KEMET/EIA
35
35
35
10
22
33
D/7343-31
X/7343-43
X/7343-43
50
50
3.3
10
D/7343-31
D/7343-31
VDC
µF
KEMET/EIA
T498D335(1)050A(2)E1K1
T498D106(1)050A(2)E1K0
(See below for
part options)
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DF
DF
ESR
ESR
Maximum Allowable
Ripple Current
Maximum Allowable
Ripple Current
Moisture
Sensitivity
Moisture
Sensitivity
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated. Designates termination finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
Roll Over for
Order Info.
T2012_T498 • 3/15/2013
6
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Recommended Voltage Derating Guidelines
6.3
10
16
20
25
35
50
Working Voltage
85°C
6.3
10
16
20
25
35
150°C
4.22
6.70
10.72
13.40
16.75
23.45
85°C
3.15
5
8
10
12.5
17.5
150°C
2.08
3.30
5.28
6.60
8.25
11.55
50
33.50
25
16.50
1.2
1
% Working Voltage
Rated
Voltage
Recommended
Application Voltage (for
maximum reliability)
0.8
0.6
% Change in Working DC Voltage with
Temperature
0.4
Recommended Maximum Application
Voltage (As % of Rated Voltage)
67%
33%
0.2
0
-55
25
85
Temperature (°C)
125
150
Ripple Current/Ripple Voltage
KEMET Series
and Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 25°C
w/+20°C Rise
A
B
C
D
X
E
T428P
S
T
U
V
T510X
T510E
3216–18
3528–21
6032–28
7343–31
7343–43
7360–38
7360–38
3216–12
3528–12
6032–15
7343–20
7343–43
7360–38
75
85
110
150
165
200
325
60
70
90
125
270
285
≤ 25°C
1.00
Temperature Compensation Multipliers
for Maximum Power Dissipation
85°C
0.90
125°C
0.40
150°C*
0.30
175°C**
0.20
T= Environmental Temperature
*T498 Only
**T499 Only
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = √P max*R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation(watts)
R = ESR at specified frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
7
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
85°C
125°C
15% of Rated Voltage
5% of Rated Voltage
1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
X
Y
C
V1
V2
X
Y
C
V1
V2
X
Y
C
V1
V2
A
3216-18
1.35
2.15
1.45
6.10
2.80
1.25
1.75
1.35
5.00
2.30
1.15
1.35
1.25
4.10
2.00
B
3528-21
2.35
2.15
1.45
6.10
4.00
2.25
1.75
1.35
5.00
3.50
2.15
1.35
1.25
4.10
3.20
C
6032-28
2.35
2.65
2.60
8.90
4.40
2.25
2.25
2.50
7.80
3.90
2.15
1.85
2.40
6.90
3.60
D
7343-31
2.55
3.75
2.70
10.20
5.50
2.45
3.35
2.60
9.10
5.00
2.35
2.95
2.50
8.20
4.70
X¹
7343-43
2.55
3.75
2.70
10.20
5.50
2.45
3.35
2.60
9.10
5.00
2.35
2.95
2.50
8.20
4.70
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
8
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Soldering Process
Please note that although the X/7343–43 case size can withstand
wave soldering, the tall profile (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the difficulty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until reflow occurs. Once reflow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Profile Feature
SnPb Assembly
Pb-Free Assembly
100°C
150°C
Preheat/Soak
Temperature Minimum (TSmin)
Temperature Maximum (TSmax)
150°C
200°C
Time (ts) from Tsmin to Tsmax)
60 – 120 seconds
60 – 120 seconds
3°C/seconds maximum
Ramp-up Rate (TL to TP)
3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t L)
60 – 150 seconds
60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
20 seconds maximum
30 seconds maximum
6°C/seconds maximum
6°C/seconds maximum
6 minutes maximum
8 minutes maximum
Time within 5°C of Maximum
Peak Temperature (tP)
Ramp-down Rate (TP to TL)
Time 25°C to Peak
Temperature
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
TP
TL
Temperature
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase reflow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended profile
conditions for convection and IR reflow reflect the profile conditions
of the IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three reflow
passes at these conditions.
tP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
tL
Tsmax
Tsmin
25
tS
25ºC to Peak
Time
Construction
MNO2 /Ta2O5/Ta
Silver Adhesive
Silver Paint
Washer
Leadframe
(-Cathode)
Leadframe
(+Anode)
Carbon
Tantalum Wire
Weld
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
9
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Capacitor Marking
KEMET High
Temperature
150⁰C
C, D, X Case Sizes
HT
Polarity
Indicator (+)
Picofarad Code
Date
Code*
Rated
Voltage
Date
Code*
KEMET ID
227
10V
KEMET ID
Polarity
Indicator (+)
K
227
10 K
230
Rated
Voltage
KEMET High
Temperature
150⁰C
Picofarad Code
C6
Internal Code
49
* 230 = 30th week of 2012
Date Code*
Date Code *
1 digit = Last number of Year
st
2nd and 3rd digit = Week of the Year
9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
01 = 1st week of the Year to
52 = 52nd week of the Year
Year
Month
X = 2009
1 = Jan
7 = Jul
A = 2010
2 = Feb
8 = Aug
B = 2011
3 = Mar
9 = Spt
C = 2012
4 = Apr
O = Oct
D = 2013
5 = May
N = Nov
E = 2014
6 = Jun
D = Dec
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%
relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of
chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years
of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
10
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Tape & Reel Packaging Information
KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in
accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging
system is compatible with all tape-fed automatic pick-and-place systems.
8 mm (0.315")
or
12 mm (0.472")
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
180 mm (7.0")
or
330 mm (13.0")
Table 3 – Packaging Quantity
Case Code
KEMET
I
S
T
M
U
L
W
Z
V
A
B
C
D
Y
X
E/T428P
H
EIA
3216-10
3216-12
3528-12
3528-15
6032-15
6032-19
7343-15
7343-17
7343-20
3216-18
3528-21
6032-28
7343-31
7343-40
7343-43
7360-38
7360-20
Tape Width
(mm)
7" Reel*
13" Reel*
8
8
8
8
12
12
12
12
12
8
8
12
12
12
12
12
12
3,000
2,500
2,500
2,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
500
500
500
500
500
1,000
12,000
10,000
10,000
8,000
5,000
5,000
3,000
3,000
3,000
9,000
8,000
3,000
2,500
2,000
2,000
2,000
2,500
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
11
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
P2
T
T2
ØDo
Po
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
E1
Ao
F
Ko
W
B1
E2
Bo
S1
P1
T1
Center Lines of Cavity
ØD 1
Cover Tape
B 1 is for tape feeder reference only,
including draft concentric about B o.
Embossment
For cavity size,
see Note 1 Table 4
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
D0
8 mm
12 mm
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
16 mm
D1 Minimum
Note 1
1.0
(0.039)
1.5
(0.059)
E1
P0
P2
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
R Reference
Note 2
25.0
(0.984)
30
(1.181)
S1 Minimum
Note 3
0.600
(0.024)
T Maximum T1 Maximum
0.600
(0.024)
0.100
(0.004)
Variable Dimensions — Millimeters (Inches)
Tape Size
Pitch
8 mm
Single (4 mm)
12 mm
Single (4 mm) &
Double (8 mm)
16 mm
Triple (12 mm)
B1 Maximum
Note 4
4.35
(0.171)
8.2
(0.323)
12.1
(0.476)
E2 Minimum
F
P1
T2 Maximum
W Maximum
A0,B0 & K0
6.25
(0.246)
10.25
(0.404)
14.25
(0.561)
3.5 ±0.05
(0.138 ±0.002)
5.5 ±0.05
(0.217 ±0.002)
5.5 ±0.05
(0.217 ±0.002)
4.0 ±0.10
(0.157 ±0.004)
8.0 ±0.10
(0.315 ±0.004)
8.0 ±0.10
(0.315 ±0.004)
2.5
(0.098)
4.6
(0.181)
4.6
(0.181)
8.3
(0.327)
12.3
(0.484)
16.3
(0.642)
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
12
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm
0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Width (mm)
8,12
16 – 200
Bo
Maximum
Rotation (
20
10
°
T)
Typical Component Centerline
Ao
Figure 3 – Maximum Lateral Movement
8 mm & 12 mm Tape
0.5 mm maximum
0.5 mm maximum
16 mm Tape
°
s
Tape
Maximum
Width (mm) Rotation (
8,12
20
16 – 56
10
72 – 200
5
°
S)
Figure 4 – Bending Radius
Embossed
Carrier
Punched
Carrier
1.0 mm maximum
1.0 mm maximum
R
Bending
Radius
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
R
T2012_T498 • 3/15/2013
13
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Figure 5 – Reel Dimensions
Full Radius,
See Note
W3 (Includes
Access Hole at
Slot Location
(Ø 40 mm minimum)
flange distortion
at outer edge)
W2 (Measured at hub)
D
A
N
(See Note)
C
(Arbor hole
diameter)
B
(see Note)
W1 (Measured at hub)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
A
B Minimum
C
D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
N Minimum
W1
W2 Maximum
W3
50
(1.969)
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
14.4
(0.567)
18.4
(0.724)
22.4
(0.882)
Shall accommodate tape width
without interference
8 mm
12 mm
16 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
14
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Punched Carrier
8 mm & 12 mm only
END
Round Sprocket Holes
START
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
Trailer
160 mm Minimum
Components
100 mm
Minimum Leader
400 mm Minimum
Top Cover Tape
Figure 7 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
15
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Sasso Marconi, Italy
Tel: 39-051-939111
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
2835 KEMET Way
Simpsonville, SC 29681
Southeast
Lake Mary, FL
Tel: 407-855-8886
Espoo, Finland
Tel: 358-9-5406-5000
Northeast
Wilmington, MA
Tel: 978-658-1663
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Central
Novi, MI
Tel: 248-994-1030
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
16
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Other KEMET Resources
Tools
Resource
Location
Configure A Part: CapEdge
http://capacitoredge.kemet.com
SPICE & FIT Software
http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge
http://www.kemet.com/keask
Electrolytic LifeCalculator
http://www.kemet.com:8080/elc
Product Information
Resource
Location
Products
Technical Resources (Including Soldering Techniques)
RoHS Statement
Quality Documents
http://www.kemet.com/products
http://www.kemet.com/technicalpapers
http://www.kemet.com/rohs
http://www.kemet.com/qualitydocuments
Product Request
Resource
Location
Sample Request
Engineering Kit Request
http://www.kemet.com/sample
http://www.kemet.com/kits
Contact
Resource
Location
Website
Contact Us
Investor Relations
www.kemet.com
http://www.kemet.com/contact
http://www.kemet.com/ir
Call Us
1-877-MyKEMET
Twitter
http://twitter.com/kemetcapacitors
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
17
Tantalum Surface Mount Capacitors – High Temperature
T498 150°C Rated MnO2 Series
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing
Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com
Date: 2013.03.26 11:20:23 -04'00'
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2012_T498 • 3/15/2013
18