KEMET Organic Capacitor (KO-CAP®)
T52X/T530 Polymer Electrolytic Capacitors
Overview
The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable
of delivering very low ESR and improved capacitance retention at high frequencies. KO-CAP combines the low ESR of
multilayer ceramic, the high capacitance of aluminum electrolytic, and the volumetric efficiency of tantalum into a single
surface mount package. Unlike liquid electrolyte-based capacitors, KO-CAP has a very long operational life and high ripple
current capabilities.
The T52X/T530 provides the widest range of voltages, capacitance and case size options in the KO-CAP family and is
suitable for general purpose DC applications for up to 48 volt DC voltage rails.
Benefits
• ESR values down to 5 mΩ
• Stable capacitance across temperature and voltage
• No aging effects
• High ripple handling
• Volumetrically efficient
• High frequency capacitance retention
• 100% accelerated steady state aging
• 100% surge current tested
• Halogen-free epoxy and RoHS compliant
Applications
Typical applications include DC/DC converters, audio/sound circuits (mobile phone and base stations, smart phones, MP3
players), power supply inputs, portable electronics (notebook PCs, displays, SSDs, HDDs and USBs, digital cameras, GPS
navigation systems, WiFi modules), telecommunications, consumer electronics (analytical and test equipment, high speed
servers), high voltage applications such as 12 V to 48 V power input rails, densely populated circuits with space restrictions,
microprocessor decoupling, and high ripple current applications.
Built Into Tomorrow
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
1
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Environmental Compliance
• RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn, Ni-Pd-Au or
non-magnetic 100% Sn solder
• Halogen-free
• Epoxy compliant with UL94 V-0
K-SIM
For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET
K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.
Series Reference Selection
Series
Voltage Range
Maximum Operating Temperature
< 1 V to 9 V
Applications
12 V to 48 V
Applications
85°C Rated
105°C Rated
X
*
X**
X
125°C Rated
Special Features
Miniature Size
T520
Standard
T521
High Voltage
T523
Facedown
Terminal
X
X**
T525
High Temperature
X
*
T527
Small Size
X
X
X
X
T529
Miniature
X
X
X
X
T530
High Cap/
Low ESR
X
X
TF08
UltrathinFacedown
X
*
X
X
X
Low ESL
X
X
X**
X
X
X
X
* Not recommended for new design.
** Selected values.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
2
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Ordering Information
T52X/T530
T
520
Capacitor
Class
Series
T=
Tantalum
520 = Polymer
521 = High
voltage
523 = Facedown
terminal
525 = 125°C
rated
527 = Facedown
terminal
529 = Substrate
terminal
530 = 125°C High
capacitance
V
157
M
Case Capacitance Code Capacitance
Size1
(pF)
Tolerance
A
B
C
D
H
I
J
L
M
P
Q
S
T
U
V
W
X
Y
First two digits
represent
significant
figures. Third
digit specifies
number of
zeros.
K = ±10%
M = ±20%
006
A
T
E045
Rated
Voltage
(VDC)
Failure
Rate/
Design
Termination Finish
ESR Code
002 = 2
2R5 = 2.5
003 = 3
004 = 4
006 = 6.3
008 = 8
010 = 10
011 = 11
12R = 12.5
016 = 16
020 = 20
025 = 25
035 = 35
050 = 50
063 = 63
075 = 75
A=
N/A
T = 100% Matte tin
(Sn)-plated
H*** = Tin/lead
(SnPb) solder coated
(5% Pb minimum)
P* = Ni-Pd-Au-plated
N = Non-magnetic
100% Tin (Sn)
M = Non-magnetic
(SnPb)
A** = Ni-Au
E = ESR
last three
digits
specify ESR
in mΩ
(045 = 45
mΩ)
Packaging
(C-Spec)
Blank = 7" reel
7280**** = 13"
reel
Gold termination available upon request
* P termination only available on select part numbers
** A termination only available on T529 part numbers
*** H termination not available for T527/T529 part numbers
**** 13" reel not available for T520A case and some other part numbers
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
3
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Ordering Information cont.
TF08
T
F
08A
226
Capacitor
Class
Series
Case Size
Capacitance Code
(pF)
F= Ultrathin
polymer solutionFacedown
construction
08A =
3216/0.8
max height
T=
Tantalum
First two digits
represent
significant
figures. Third digit
specifies number
of zeros.
M
016
Capacitance Rated Voltage
Tolerance
(VDC)
M = ±20%
006 = 6.3
016 = 16
A
P
E200
Failure
Rate/
Design
Termination Finish
ESR Code
A = N/A
P = Ni-Pd-Au-plated
E = ESR Last
three digits
specify ESR
in mΩ (200 =
200mΩ)
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz)
ESR (100 kHz)
Leakage Current
−55°C to 85°C/105°C/125°C (refer to part number for maximum temperature rating)
4.7 – 1,500 µF at 120 Hz/25°C
K tolerance (10%), M tolerance (20%)
2 – 75 V
Refer to Part Number Electrical Specification Table*
Refer to Part Number Electrical Specification Table**
Refer to Part Number Electrical Specification Table
* For T529 Series DF measurement apply 1.5 V DC
** For PN T520B477M2R5ATE014 the ESR measurement should be taken at 300 to 500kHz
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
4
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Qualification
Test
Condition
Characteristics
Δ C/C
Endurance
Temperature: 85°C, 105°C, 125°C *2
Voltage: 1.0 Rated Voltage
2/3 Rated Voltage for 125°C rating PN
Time: 2,000 Hours
1,000 Hours for T527/T529 *3
DF
DCL
ESR
Δ C/C
Storage Life
Temperature: 105°C, 125°C
Voltage: 0 Voltage
Time: 2,000 Hours
(N/A for T527 and T529 *3)
DF
*2
DCL
ESR
Δ C/C
Humidity
Temperature: 60°C
Voltage: No Load
Humidity: 90% RH
Time: 500 Hours, 1,000 Hours (T525, T530)
DF
DCL
ESR
+25°C
Temperature
Stability
Extreme temperature exposure at
a succession of continuous steps
at +25°C, −55°C, +25°C, +85°C,
+105°/125°C *2, +25°C
Surge Voltage
Temperature: 105°C, 85°C
Voltage: 1.32 x Rated voltage*5
Time: 1,000 cycles
IL*1
±20%
±30%
+50% - 0% of
DC/C (T527/29/TF08A)*3
DF
IL
IL
1.2 x IL
1.5 x IL*6
1.5 x IL
DCL
IL
DF
DCL
ESR
Mechanical
Shock/Vibration
MIL–STD–202, Method 213, Condition I,
100 G Peak.
MIL–STD–202, Method 204, Condition D,
10 Hz to 2,000 Hz, 20 G peak
Within initial limits
Within 1.25 x initial limit
T521: 1.25 x IL at 105°C, 2x IL at 125°C
T525/T530: Within 2.0 x initial limit
Within 2.0 x initial limit
Within −5%/+35% of initial value
T527/T529/TF08A: −20% to +30% of initial DC/C limit
T520B477M2R5ATE014: −20% to +50% of initial DC/C limit
Within initial limits
T527/T529/TF08A: Within 1.5 x initial limits*3
Within 5.0 x initial limit
T521/T525/T529/T530: Within 3.0 x initial limit *3
T527/TF08A: Within initial limits
Within 2.0 x initial limit
T525/T527/T529/T530/TF08A: N/A*3
−55°C
+85°C
+105°/125°C
±20%
−20% - 0% of
DC/C (T527/29/
TF08A)*3
Δ
C/C
Δ C/C
*2, *4, *5
Within −20%/+10% of initial value
T527, T529 and TF08A: Within −20/+20 of initial value
Within initial limits
T527/T529/TF08A: Within 1.5 x initial limits*3
85°C and 105°C rated parts: Within 1.25 x initial limit
125°C rated parts: Within 2.0 x initial limits
T527/TF08A: Within initial limits
T529: Within 3.0 x initial limits
Within 2.0 x initial limit
(N/A for T527/T529/TF08A*3)
Within −20%/+10% of initial value
Δ C/C
N/A
10 x IL
10 x IL
Within −20%/+10% of initial value
T527/T529/TF08A: Within −20/+20% of initial value
Within initial limits
Within initial limits
Within initial limits
T527/T529/TF08A: N/A*3
Within ±10% of initial value
Within initial DC/C limits
DF
Within initial limits
DCL
Within initial limits
IL = Initial limit
Please refer to part number specifications for individual temperature classification.
*3
This condition/exclusion applies also to PN T520B477M2R5ATE014 and PN T520B337M2R5ATE009
*4
For Series T527, T529 and TF test temperature is 85°C
*5
For T527 > 20 V test temperature is at +15 - +35°C, test voltage at 1.16 x VR
*5
For T527/TF,6 V test voltage is 1.27 x rated voltage / For TFA08226M016 test voltage is 1.15 x rated voltage
*6
For part numbers rated at 85°C
*1
*2
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
5
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Reliability
KO-CAP capacitors have an average failure rate of 0.5 %/1,000 hours at category voltage, UC, and category temperature,
TC. These capacitors are qualified using industry test standards at UC and TC. The minimum test time (1,000 hours or 2,000
hours) is dependent on the product.
The actual life expectancy of KO-CAP capacitors increases when application voltage, UA, and application temperature, TA,
are lower than UC and TC. As a general guideline, when UA < 0.9 * UC and TA < 85°C, the life expectancy will typically exceed
the useful lifetime of most hardware (> 10 years).
The lifetime of a KO-CAP capacitor at a specific application voltage and temperature can be modeled using the equations
below. A failure is defined as passing enough current to blow a 1-amp fuse. The calculation is an estimation based on
empirical results and is not a guarantee.
VAF =
[ (
TAF = e
( )
UC n
UA
Ea
1
1
k
273+TA
273+TC
)]
where:
TAF = acceleration factor due to temperature, unitless
Ea = activation energy, 1.4 eV
where:
VAF = acceleration factor due to voltage, unitless
UC = category voltage, volt
UA = application voltage, volt
k = Boltzmann’s constant, 8.617E-5 eV/K
TA = application temperature, °C
n = exponent, 16
TC = category temperature, °C
AF = VAF * TAF
LifeU ,T = LifeU ,T * AF
A
A
C
C
where:
where:
LifeUA, TA = guaranteed life application voltage
and temperature, years
AF = acceleration factor, unitless
LifeUC, TC = guaranteed life category voltage
and temperature, years
TAF = accerlation factor due to temperature, unitless
VAF = acceleration factor due to voltage, unitless
AF = acceleration factor, unitless
Terms:
Category voltage, UC : maximum recommended peak DC operating voltage for continuous operation at the category temperature, TC
Rated voltage, U R : maximum recommended peak DC operating voltage for continuous operation up to the rated temperature, TR
Category temperature, TC : maximum recommended operating temperature. Voltage derating may be required at TC
Rated temperature, TR : maximum recommended operating temperature without voltage derating. TR is equal to or lower than TC
Reliability Table 1 – Common temperature range classifications
85°C (TR) /
85°C (TC)
105°C (TR) /
105°C (TC)
105°C (TR) /
125°C (TC)
Rated Voltage (UR)
2.5
4.0
6.3
8.0
10.0
12.5
16.0
20.0
25.0
35.0
50.0
63.0
75.0
Category Voltage (UC)
2.5
4.0
6.3
8.0
10.0
12.5
16.0
20.0
25.0
35.0
50.0
63.0
75.0
Rated Voltage (UR)
2.5
4.0
6.3
8.0
10.0
12.5
16.0
20.0
25.0
35.0
50.0
63.0
75.0
Category Voltage (UC)
2.5
4.0
6.3
8.0
10.0
12.5
16.0
20.0
25.0
35.0
50.0
63.0
75.0
Rated Voltage (UR)
2.5
4.0
6.3
8.0
10.0
12.5
16.0
20.0
25.0
35.0
50.0
63.0
75.0
Category Voltage (UC)
1.7
2.7
4.2
5.4
6.7
8.4
10.7
13.4
16.8
23.5
33.5
42.2
50.3
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
6
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Electrical Characteristics
T520 Standard (2 V – 10 V)
ESR vs. Frequency
1000
T520B157M006ATE035_Imp
T520C227M006ATE025_Imp
T520V337M006ATE015_Imp
T520D337M006ATE009_Imp
T520B157M006ATE035_ESR
T520C227M006ATE025_ESR
T520V337M006ATE015_ESR
T520D337M006ATE009_ESR
10
1
0.1
Capacitance (uF)
100
Impedance,ESR (Ohms)
Capacitance vs. Frequency
100
10
T520B157M006ATE035
T520C227M006ATE025
T520V337M006ATE015
T520D337M006ATE009
0.01
0.001
100
1,000
10,000
100,000
1,000,000
1
10,000,000
100
1,000
Frequency (Hz)
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
T521 High Voltage (12 V – 75 V)
Capacitance vs. Frequency
ESR vs. Frequency
100
1
Capacitance (µF)
10
Impedance, ESR (Ohms)
100
T521V476M020ATE055_Imp
T521V336M025ATE060_Imp
T521V156M035ATE100_Imp
T521V476M020ATE055_ESR
T521V336M025ATE060_ESR
T521V156M035ATE100_ESR
0.1
0.01
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
ESR vs. Frequency
10
1
T521V476M020ATE055
T521V336M025ATE060
T521V156M035ATE100
100
10,000,000
1,000
10,000
100,000
1,000,000
10,000,000
Frequency (Hz)
T530 High Cap/Low ESR (2 V – 10 V)
Capacitance vs. Frequency
1,000
10
T530D227M006ATE006_Imp
T530X477M006ATE004_Imp
1
T530D227M006ATE006_ESR
T530Y337M006ATE005_ESR
Capacitance (μF)
Impedance, ESR (Ohms)
T530Y337M006ATE005_Imp
T530X477M006ATE004_ESR
0.1
100
T530D227M006ATE006
10
T530Y337M006ATE005
T530X477M006ATE004
0.01
0.001
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
1
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
T2076_T52X-530 • 2/22/2021
7
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Dimensions – Millimeters (Inches)
Metric will govern
T520 / T521 / T525 / T530
CATHODE (-) END VIEW
SIDE VIEW
ANODE (+) END VIEW
BOTTOM VIEW
A
B
W
B
Glue pad
shape/design at
KEMET's option
H
X
T
S
S
P
Termination cutout
at KEMET's option,
either end
R
L
For T520 Series, bevel
is at KEMET's option
Case
Size
F
Component Dimensions
F
S
±0.3 ±(0.012)
S1 ±0.4 (0.0157)
S2 ±0.2 (0.00)
Typical
B ±0.15
X
P
R
T
A
(Ref) ±0.006
(Ref)
(Ref)
(Ref)
(Ref)
(Min)
0.8
(0.032)
N/A
0.10 ±0.10
(0.004 ±0.004)
0.4
(0.016)
0.4
(0.016)
0.13
(0.005)
1.2
(0.047)
53
2.2
(0.087)
0.8 (0.032)
S1 = 0.8 (0.032) *2
S2 = 0.8 (0.032) *2
0.4
(0.016)
0.10 ±0.10
(0.004 ±0.004)
0.5
(0.020)
1.0
(0.039)
0.13
(0.005)
1.9
(0.075)
95
6.0 ±0.3
3.2 ±0.2
2.5 ±0.3
(0.236 ±0.012) (0.126 ±0.008) (0.098 ±0.012)
2.2
(0.087)
1.30
(0.051)
0.5
(0.020)
0.10 ±0.10
(0.004 ±0.004)
0.9
(0.035)
1.0
(0.039)
0.13
(0.005)
2.9
(0.114)
184
734331
7.3 ±0.3
(0.287 ±0.012)
2.8 ±0.3
(0.110 ±0.012)
2.4
(0.094)
1.30
(0.051)
0.5
(0.020)
0.10 ±0.10
(0.004 ±0.004)
0.9
(0.035)
1.0
(0.039)
0.13
(0.005)
3.6
(0.142)
435
H
736020
7.3 ±0.3
6.0 ±0.3
1.9 ±0.1
(0.287 ±0.012) (0.236 ±0.012) (0.075 ±0.004)
4.1
(0.161)
1.3
(0.051)
N/A
0.10 ±0.10
(0.004 ±0.004)
N/A
N/A
0.13
(0.005)
3.3
(0.130)
385
J
736015
7.3 ±0.3
6.0 ±0.3
(0.287 ±0.012) (0.236 ±0.012)
4.1
(0.161)
1.3
(0.051)
N/A
0.10 ±0.10
(0.004 ±0.004)
N/A
N/A
N/A
3.3
(0.130)
263
L
603219
6.0 ±0.3
(0.236 ±0.012)
3.2 ±0.2
1.8 ±0.1
(0.110 ±0.008) (0.071 ±0.004)
2.2
(0.087)
1.3
(0.051)
N/A
0.05
(0.002)
N/A
N/A
0.13
(0.005)
2.5
(0.098)
187
M
352815
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
1.4 ±0.1
(0.110 ±0.008) (0.055 ±0.004)
2.2
(0.087)
0.8
(0.031)
N/A
0.05
(0.002)
N/A
N/A
0.13
(0.005)
1.1
(0.043)
98
Q
734312
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
1.1 ±0.1
(0.169 ±0.012) (0.043 ±0.004)
2.4
(0.094)
1.3
(0.051)
N/A
0.05
(0.002)
N/A
N/A
0.13
(0.005)
3.8
(0.150)
170
T
352812
3.5 ±0.2
(0.138 ±0.008)
2.8 ±0.2
1.1 ±0.1
(0.110 ±0.008) (0.043 ±0.004)
2.2
(0.087)
0.8
(0.032)
N/A
0.05
(0.002)
N/A
N/A
0.13
(0.005)
1.9
(0.075)
55
U
603215
6.0 ±0.3
3.2 ±0.2
1.4 ±0.1
(0.236 ±0.012) (0.126 ±0.008) (0.055 ±0.004)
2.2
(0.087)
1.3
(0.051)
N/A
0.05
(0.002)
N/A
N/A
0.13
(0.005)
2.9
(0.114)
117
V
734319
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
2.4
(0.094)
1.3
(0.051)
N/A
0.05
(0.002)
N/A
N/A
0.13
(0.005)
3.6
(0.142)
274
N/A
0.05
(0.002)
N/A
N/A
0.13
(0.005)
3.6
(0.142)
223
KEMET
EIA
L
W
A
321618
3.2 ±0.2
1.6 ±0.2
1.6 ±0.2
(0.126 ±0.008) (0.063 ±0.008) (0.063 ±0.008)
1.2
(0.047)
B
352821
3.5 ±0.2
(0.138 ±0.008)
1.9 ±0.1*3
(0.075 ±0.008)
C
603228
D
2.8 ±0.2
(0.110 ±0.008)
4.3 ±0.3
(0.169 ±0.012)
H
±0.1 ±(0.004)
1.5 (0.059)
Maximum
1.8 ±0.1
(0.071±0.004)
*1
Weight
(mg)
W
734315
7.3 ±0.3
(0.287 ±0.012)
2.4(0.094)
1.30 (0.051)
4.3 ±0.3
1.4 ±0.1
2.8 ±0.2
S1 = 5.0 (0.197) *2
(0.169 ±0.012) (0.055 ±0.004)
(0.110 ±0.0079) *2 S2 = 1.3 (0.051) *2
X
734343
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
4.0 ±0.3
(0.157 ±0.012)
2.4
(0.094)
1.3
(0.051)
0.5
(0.020)
0.10 ±0.10
(0.004 ±0.004)
1.7
(0.067)
1.0
(0.039)
0.13
(0.005)
3.6
(0.142)
554
Y
734340
7.3 ±0.3
(0.287 ±0.012)
4.3 ±0.3
(0.169 ±0.012)
3.8 ±0.2
(0.150 ±0.008)
2.4
(0.094)
1.3
(0.051)
0.5
(0.020)
0.10 ±0.10
(0.004 ±0.004)
1.7
(0.067)
1.0
(0.039)
0.13
(0.005)
3.8
(0.150)
494
Height tolerance is ±0.2 for V case T521 only
S1 and S2 is for T528 series only
*3
Height tolerance is ±0.2 for: T520B with M & N terminations
*1
*2
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
8
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Dimensions – Millimeters cont.
T523
END VIEW
BOTTOM VIEW
SIDE VIEW
H
F
W
L
S
S
KEMET
EIA
W
7343-15
J
7360-15
V
7343-20
H
7360-20
L
W
H
F ±0.1
(±0.004)
S ±0.3
(±0.012)
7.3±0.3
(0.287±0.012)
7.3±0.3
(0.287±0.012)
7.3±0.3
(0.287±0.012)
7.3±0.3
(0.287±0.012)
4.3±0.3
(0.169±0.012)
6.0±0.3
(0.236±0.012)
4.3±0.3
(0.169±0.012)
6.0±0.3
(0.236±0.012)
1.4±0.1
(0.055±0.004)
1.4±0.1
(0.055±0.004)
1.9±0.1
(0.075±0.004)
1.9±0.1
(0.075±0.004)
2.4
(0.094)
4.45
(0.175)
2.4
(0.094)
4.45
(0.175)
1.3
(0.051)
1.6
(0.063)
1.3
(0.051)
1.6
(0.063)
Typical
Weight
(mg)
223
263
274
385
T527/TF
END VIEW
BOTTOM VIEW
SIDE VIEW
H
F
W
L
S
Case Size
S
Component Dimensions
Typical Weight
KEMET
EIA
L
W
H
F
S
(mg)
I
08A
T
S
3216-10
3216-08
3528-12
3216-12
3.2 ±0.2
3.2 ±0.2
3.5 ±0.2
3.2 ±0.2
1.6 ±0.2
1.6 ±0.2
2.8 ±0.2
1.6 ±0.2
0.9 ±0.1
0.8 Maximum
1.1 ±0.1
1.1 ±0.1
1.2 ±0.1
1.2 ±0.1
2.2 ±0.1
1.2 ±0.1
0.8 ±0.2
0.8 ±0.2
0.7 ±0.2
0.8 ±0.2
70
55
26.2
T529
END VIEW
BOTTOM VIEW
SIDE VIEW
H
F
L
W
S
S
Case Size
Component Dimensions
Typical Weight
KEMET
EIA
L
W
H
F
S
(mg)
P
I
2012–10
3216–10
2.0±0.1
3.2±0.2
1.25±0.1
1.6±0.2
1.0 maximum
1.0 maximum
0.9±0.1
1.2±0.1
0.55±0.1
0.8±0.1
11.4
70
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
9
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
94
11.75
17
17
25
25
25
25
25
25
25
37.5
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
82.5
83
82.5
82.5
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
10
8*
8*
8*
8
8
10
8
8
8
8
8
8*
8*
8
8
8
8
8
8
8
8
10 *
8
8
8
10
10
10
10
10
10
10
10
10
10
8*
8*
8
8
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
40
90
70
80
40
70
80
25
35
40
70
55
25
35
15
18
21
25
30
35
55
70
70
55
25
45
25
6
7
9
12
15
25
45
7
40
9
12
15
18
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
µF
KEMET/EIA
(See below for
part options)
470
47
68
68
100
100
100
100
100
100
100
150
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
330
330
330
330
V/7343-19
A/3216-18
A/3216-18
A/3216-18
T/3528-12
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
A/3216-18
A/3216-18
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
T/3528-12
U/6032-15
C/6032-28
C/6032-28
W/7343-15
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
B/3528-21
B/3528-21
B/3528-21
B/3528-21
T520V477M002A(1)E040
T520A476M2R5A(1)E090 ^
T520A686M2R5A(1)E070 ^
T520A686M2R5A(1)E080 ^
T520T107M2R5A(1)E040
T520T107M2R5A(1)E070
T525T107M2R5A(1)E080
T520B107M2R5A(1)E025
T520B107M2R5A(1)E035
T520B107M2R5A(1)E040
T520B107M2R5A(1)E070
T520U157M2R5A(1)E055
T520A227M2R5A(1)E025 ^
T520A227M2R5A(1)E035 ^
T520B227M2R5A(1)E015
T520B227M2R5A(1)E018
T520B227M2R5A(1)E021
T520B227M2R5A(1)E025
T520B227M2R5A(1)E030
T520B227M2R5A(1)E035
T520B227M2R5A(1)E055
T520B227M2R5A(1)E070
T520T227M2R5ATE070 ^
T520U227M2R5A(1)E055
T520C227M2R5A(1)E025
T520C227M2R5A(1)E045
T520W227M2R5A(1)E025
T520V227M2R5A(1)E006
T520V227M2R5A(1)E007
T520V227M2R5A(1)E009
T520V227M2R5A(1)E012
T520V227M2R5A(1)E015
T520V227M2R5A(1)E025
T520V227M2R5A(1)E045
T520D227M2R5A(1)E007
T520D227M2R5A(1)E040
T520B337M2R5ATE009 ^
T520B337M2R5ATE012 ^
T520B337M2R5A(1)E015
T520B337M2R5A(1)E018
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
2,200
1,100
1,300
1,200
1,600
1,200
1,100
2,300
1,900
1,800
1,300
1,600
1,732
1,500
2,900
2,700
2,500
2,300
2,100
1,900
1,500
1,300
1,200
1,600
2,600
1,900
2,700
5,600
5,200
4,600
3,900
3,500
2,700
2,000
5,700
2,400
3,073
2,700
2,900
2,700
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
125
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
10
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
82.5
188
117.5
117.5
117.5
117.5
117.5
117.5
117.5
117.5
117.5
117.5
117.5
117.5
117.5
117.5
117.5
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8*
10
10
10
10
10
10
8
8
8
10
8
10
10
8
10
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
35
45
70
15
18
25
45
9
12
25
15
25
40
6
7
9
12
15
18
25
40
6
7
25
14
6
7
9
12
15
18
25
45
5
6
6
7
9
10
25
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
µF
KEMET/EIA
(See below for
part options)
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
L/6032-19
L/6032-19
L/6032-19
W/7343-15
W/7343-15
W/7343-15
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
B/3528-21
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
T520B337M2R5A(1)E035
T520B337M2R5A(1)E045
T520B337M2R5A(1)E070
T520C337M2R5A(1)E015
T520C337M2R5A(1)E018
T520C337M2R5A(1)E025
T520C337M2R5A(1)E045
T520L337M2R5A(1)E009
T520L337M2R5A(1)E012
T520L337M2R5A(1)E025
T520W337M2R5A(1)E015
T520W337M2R5A(1)E025
T520W337M2R5A(1)E040
T520V337M2R5A(1)E006
T520V337M2R5A(1)E007
T520V337M2R5A(1)E009
T520V337M2R5A(1)E012
T520V337M2R5A(1)E015
T520V337M2R5A(1)E018
T520V337M2R5A(1)E025
T520V337M2R5A(1)E040
T520D337M2R5A(1)E006
T520D337M2R5A(1)E007
T525D337M2R5A(1)E025
T520B477M2R5ATE014 ^
T520V477M2R5A(1)E006
T520V477M2R5A(1)E007
T520V477M2R5A(1)E009
T520V477M2R5A(1)E012
T520V477M2R5A(1)E015
T520V477M2R5A(1)E018
T520C477M2R5A(1)E025
T520C477M2R5A(1)E045
T530D477M2R5A(1)E005
T520D477M2R5A(1)E006
T530D477M2R5A(1)E006
T520D477M2R5A(1)E007
T520D477M2R5A(1)E009
T530D477M2R5A(1)E010
T525D477M2R5A(1)E025
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
1,900
1,700
1,300
3,300
3,000
2,600
1,900
4,100
3,500
2,400
3,500
2,700
2,100
5,600
5,200
4,600
3,900
3,500
3,200
2,700
2,200
6,100
5,700
3,000
3,000
5,600
5,200
4,600
3,900
3,500
3,200
2,600
1,900
7,100
6,100
6,500
5,700
5,000
5,000
3,000
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
125
85
105
105
105
105
105
105
105
105
125
105
125
105
105
125
125
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
11
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
140
170
170
170
170
170
170
170
170
170
170
170
170
170
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
375
375
375
30
30
30
30
30
45
45
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
8
8
8
10
8
10
10
10
8
8
8
10
10
8
10
10
10
10
10
10
10
8
8
10
10
10
8
8
8
10
10
8
10
8
8
8
8
8
8
8
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
5
6
7
10
10
15
25
40
5
6
7
15
25
6
4.5
6
7
9
10
15
30
5
6
10
15
25
4
5
6
10
15
5
15
80
25
35
40
70
25
35
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
3
3
3
3
3
3
µF
KEMET/EIA
(See below for
part options)
560
680
680
680
680
680
680
680
680
680
680
680
680
680
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1500
1500
1500
100
100
100
100
100
150
150
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
Y/7343-40
X/7343-43
X/7343-43
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
T530D567M2R5A(1)E005
T530D687M2R5A(1)E006
T530D687M2R5A(1)E007
T520D687M2R5A(1)E010
T530D687M2R5A(1)E010
T520D687M2R5A(1)E015
T525D687M2R5A(1)E025
T520D687M2R5A(1)E040
T530Y687M2R5A(1)E005
T530Y687M2R5A(1)E006
T530Y687M2R5A(1)E007
T520Y687M2R5A(1)E015
T520Y687M2R5A(1)E025
T530X687M2R5A(1)E006
T520D108M2R5A(1)E4R5
T520D108M2R5A(1)E006
T520D108M2R5A(1)E007
T520D108M2R5A(1)E009
T520D108M2R5A(1)E010
T520D108M2R5A(1)E015
T520D108M2R5A(1)E030
T530Y108M2R5A(1)E005
T530Y108M2R5A(1)E006
T520Y108M2R5A(1)E010
T520Y108M2R5A(1)E015
T520Y108M2R5A(1)E025
T530X108M2R5A(1)E004
T530X108M2R5A(1)E005
T530X108M2R5A(1)E006
T520X108M2R5A(1)E010
T520Y158M2R5A(1)E015
T530X158M2R5A(1)E005
T520X158M2R5A(1)E015
T525B107M003A(1)E080
T520B107M003A(1)E025
T520B107M003A(1)E035
T520B107M003A(1)E040
T520B107M003A(1)E070
T520B157M003A(1)E025
T520B157M003A(1)E035
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
7,100
6,500
6,000
4,700
5,000
3,900
3,000
2,400
7,300
6,600
6,100
4,000
3,100
6,700
7,100
6,100
5,700
5,000
4,700
3,900
2,700
7,300
6,600
4,900
4,000
3,100
8,200
7,300
6,700
5,000
4,000
7,300
4,100
1,300
2,300
1,900
1,800
1,300
2,300
1,900
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
125
125
125
105
125
105
125
105
125
125
125
105
105
125
105
105
105
105
105
105
105
125
125
105
105
105
125
125
125
105
105
125
105
125
105
105
105
105
105
105
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
12
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
45
45
45
99
99
99
99
99
141
141
204
204
204
204
300
300
300
450
6
13.2
13.2
18.8
18.8
18.8
27
27.2
27.2
27.2
27.2
27.2
27.2
27.2
40
40
40
40
40
40
40
40
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
8
8
8
10
10
10
10
10
8
10
8
10
10
10
8
10
10
8
8
8*
8*
8*
8*
8
8*
8
8
8
8
8
8
8
8*
8*
8*
8
8
8
8
8
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
40
70
80
9
12
15
25
25
10
25
10
15
25
40
10
15
30
8
100
70
80
70
80
70
180
70
25
35
40
70
80
55
200
150
200
70
150
25
35
40
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
µF
KEMET/EIA
(See below for
part options)
150
150
150
330
330
330
330
330
470
470
680
680
680
680
1000
1000
1000
1500
15
33
33
47
47
47
68
68
68
68
68
68
68
68
100
100
100
100
100
100
100
100
B/3528-21
B/3528-21
B/3528-21
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
T/3528-12
A/3216-18
A/3216-18
A/3216-18
A/3216-18
T/3528-12
A/3216-18
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
I/3216-10
A/3216-18
A/3216-18
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
T520B157M003A(1)E040
T520B157M003A(1)E070
T525B157M003A(1)E080
T520V337M003A(1)E009
T520V337M003A(1)E012
T520V337M003A(1)E015
T520V337M003A(1)E025
T525D337M003A(1)E025
T530D477M003A(1)E010
T525D477M003A(1)E025
T530D687M003A(1)E010
T520D687M003A(1)E015
T525D687M003A(1)E025
T520D687M003A(1)E040
T530X108M003A(1)E010
T520X108M003A(1)E015
T520X108M003A(1)E030
T530X158M003A(1)E008
T520T156M004A(1)E100
T520A336M004A(1)E070 ^
T520A336M004A(1)E080 ^
T520A476M004A(1)E070 ^
T520A476M004A(1)E080 ^
T520T476M004A(1)E070
T520A686M004A(1)E180 ^
T520T686M004A(1)E070
T520B686M004A(1)E025
T520B686M004A(1)E035
T520B686M004A(1)E040
T520B686M004A(1)E070
T525B686M004A(1)E080
T520U686M004A(1)E055
T527I107M004ATE200 ^
T520A107M004A(1)E150 ^
T520A107M004A(1)E200 ^
T520T107M004A(1)E070
T520T107M004A(1)E150
T520B107M004A(1)E025
T520B107M004A(1)E035
T520B107M004A(1)E040
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
1,800
1,300
1,300
4,600
3,900
3,500
2,700
3,000
5,000
3,000
5,000
3,900
3,000
2,400
5,200
4,100
2,900
5,800
1,000
1,300
1,200
1,300
1,200
1,200
800
1,200
2,300
1,900
1,800
1,300
1,300
1,600
775
900
700
1,200
800
2,300
1,900
1,800
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
125
105
105
105
105
125
125
125
125
105
125
105
125
105
105
125
105
105
105
105
105
105
105
105
105
105
105
105
125
105
105
105
105
105
105
105
105
105
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
13
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
40
40
40
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
176
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
88
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10 *
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
70
80
55
15
18
25
30
35
40
70
55
15
25
45
100
7
9
12
15
25
7
35
35
45
70
15
18
25
45
55
12
25
25
40
6
7
9
12
15
18
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
µF
KEMET/EIA
(See below for
part options)
100
100
100
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
B/3528-21
B/3528-21
U/6032-15
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
C/6032-28
C/6032-28
C/6032-28
C/6032-28
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
T/3528-12
B/3528-21
B/3528-21
B/3528-21
C/6032-28
C/6032-28
C/6032-28
C/6032-28
C/6032-28
L/6032-19
L/6032-19
W/7343-15
W/7343-15
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
T520B107M004A(1)E070
T525B107M004A(1)E080
T520U107M004A(1)E055
T520B157M004A(1)E015
T520B157M004A(1)E018
T520B157M004A(1)E025
T520B157M004A(1)E030
T520B157M004A(1)E035
T520B157M004A(1)E040
T520B157M004A(1)E070
T520U157M004A(1)E055
T520C157M004A(1)E015
T520C157M004A(1)E025
T520C157M004A(1)E045
T520C157M004A(1)E100
T520V157M004A(1)E007
T520V157M004A(1)E009
T520V157M004A(1)E012
T520V157M004A(1)E015
T520V157M004A(1)E025
T520D157M004A(1)E007
T520T227M004ATE035 ^
T520B227M004A(1)E035
T520B227M004A(1)E045
T520B227M004A(1)E070
T520C227M004A(1)E015
T520C227M004A(1)E018
T520C227M004A(1)E025
T520C227M004A(1)E045
T520C227M004A(1)E055
T520L227M004A(1)E012
T520L227M004A(1)E025
T520W227M004A(1)E025
T520W227M004A(1)E040
T520V227M004A(1)E006
T520V227M004A(1)E007
T520V227M004A(1)E009
T520V227M004A(1)E012
T520V227M004A(1)E015
T520V227M004A(1)E018
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
1,300
1,300
1,600
2,900
2,700
2,300
2,100
1,900
1,800
1,300
1,600
3,300
2,600
1,900
1,300
5,200
4,600
3,900
3,500
2,700
5,700
1,463
1,900
1,700
1,300
3,300
3,000
2,600
1,900
1,700
3,500
2,400
2,700
2,100
5,600
5,200
4,600
3,900
3,500
3,200
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
125
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
14
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
88
88
88
88
88
88
88
88
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
188
188
188
188
188
188
188
188
188
188
188
188
272
272
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
10
10
10
10
10
10
10
10
8
8
10
10
10
10
10
10
8
10
8
10
10
10
10
10
10
10
8
10
8
10
10
10
10
10
10
10
8
8
10
10
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
25
40
45
6
7
12
25
65
25
45
7
9
12
18
25
40
5
6
6
7
9
12
15
25
40
45
6
10
10
12
15
18
25
25
40
40
5
6
12
15
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
µF
KEMET/EIA
(See below for
part options)
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
470
470
470
470
470
470
470
470
470
470
470
470
680
680
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
C/6032-28
C/6032-28
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
D/7343-31
D/7343-31
T520V227M004A(1)E025
T520V227M004A(1)E040
T520V227M004A(1)E045
T520D227M004A(1)E006
T520D227M004A(1)E007
T520D227M004A(1)E012
T525D227M004A(1)E025
T520D227M004A(1)E065
T520C337M004A(1)E025
T520C337M004A(1)E045
T520V337M004A(1)E007
T520V337M004A(1)E009
T520V337M004A(1)E012
T520V337M004A(1)E018
T520V337M004A(1)E025
T520V337M004A(1)E040
T530D337M004A(1)E005
T520D337M004A(1)E006
T530D337M004A(1)E006
T520D337M004A(1)E007
T520D337M004A(1)E009
T520D337M004A(1)E012
T520D337M004A(1)E015
T525D337M004A(1)E025
T520D337M004A(1)E040
T520D337M004A(1)E045
T530D477M004A(1)E006
T520D477M004A(1)E010
T530D477M004A(1)E010
T520D477M004A(1)E012
T520D477M004A(1)E015
T520D477M004A(1)E018
T520D477M004A(1)E025
T525D477M004A(1)E025
T520D477M004A(1)E040
T525D477M004A(1)E040
T530Y477M004A(1)E005
T530Y477M004A(1)E006
T520D687M004A(1)E012
T520D687M004A(1)E015
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
2,700
2,200
2,000
6,100
5,700
4,300
3,000
1,900
2,600
1,900
5,200
4,600
3,900
3,200
2,700
2,200
7,100
6,100
6,500
5,700
5,000
4,300
3,900
3,000
2,400
2,200
6,500
4,700
5,000
4,300
3,900
3,500
3,000
3,000
2,400
2,400
7,300
6,600
4,300
3,900
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
125
105
105
105
105
105
105
105
105
105
125
105
125
105
105
105
105
125
105
105
125
105
125
105
105
105
105
125
105
125
125
125
105
105
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
15
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
272
272
272
272
272
272
272
272
272
272
272
272
400
9.45
18.9
22
22
13.86
13.86
13.86
20.79
20.79
20.79
20.79
20.79
20.79
20.79
20.79
20.79
20.79
29.61
29.6
29.6
29.6
29.61
29.61
29.61
29.61
29.61
29.61
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
10
8
10
10
10
8
8
8
10
8
10
10
8
8
6*
6*
6*
8*
8*
8
8*
8*
8
8
8
8
8
8
8
8
6*
6*
10 *
6*
8*
8
8
8
8
8
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
25
5
10
15
25
4
5
6
10
10
15
35
6
100
200
150
200
90
100
100
70
80
120
70
25
35
40
70
80
100
200
150
150
200
150
40
70
80
25
35
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
4
4
4
4
4
4
4
4
4
4
4
4
4
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
µF
KEMET/EIA
(See below for
part options)
680
680
680
680
680
680
680
680
680
680
680
680
1000
15
10
22
22
22
22
22
33
33
33
33
33
33
33
33
33
33
47
47
47
47
47
47
47
47
47
47
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
T/3528-12
P/2012-10
P/2012-10
P/2012-10
A/3216-18
A/3216-18
T/3528-12
A/3216-18
A/3216-18
A/3216-18
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
C/6032-28
P/2012-10
P/2012-10
3216-08
I/3216-10
A/3216-18
T/3528-12
T/3528-12
T/3528-12
B/3528-21
B/3528-21
T520D687M004A(1)E025
T530Y687M004A(1)E005
T520Y687M004A(1)E010
T520Y687M004A(1)E015
T520Y687M004A(1)E025
T530X687M004A(1)E004
T530X687M004A(1)E005
T530X687M004A(1)E006
T520X687M004A(1)E010
T530X687M004A(1)E010
T520X687M004A(1)E015
T520X687M004A(1)E035
T530X108M004A(1)E006
T520T156M006A(1)E100
T529P106M006AAE200 ^
T529P226M006AAE150 ^
T529P226M006AAE200 ^
T520A226M006A(1)E090 ^
T520A226M006A(1)E100 ^
T520T226M006A(1)E100
T520A336M006A(1)E070 ^
T520A336M006A(1)E080 ^
T520A336M006A(1)E120 ^
T520T336M006A(1)E070
T520B336M006A(1)E025
T520B336M006A(1)E035
T520B336M006A(1)E040
T520B336M006A(1)E070
T525B336M006A(1)E080
T520C336M006A(1)E100
T529P476M006AAE200 ^
T529P476M006AAE150 ^
TF08A476M006APE150 ^
T527I476M006ATE200 ^
T520A476M006A(1)E150 ^
T520T476M006A(1)E040
T520T476M006A(1)E070
T525T476M006A(1)E080
T520B476M006A(1)E025
T520B476M006A(1)E035
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
3,000
7,300
4,900
4,000
3,100
8,200
7,300
6,700
5,000
5,200
4,100
2,700
6,700
1,000
354
408
354
1,100
1,100
1,000
1,300
1,200
1,000
1,200
2,300
1,900
1,800
1,300
1,300
1,300
354
408
632
548
900
1,600
1,200
1,100
2,300
1,900
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
125
105
105
105
125
125
125
105
125
105
105
125
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
125
105
105
105
105
105
105
105
105
125
105
105
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
16
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
29.61
29.61
29.61
29.61
42.84
42.84
42.84
42.84
42.84
42.84
42.84
42.84
42.84
42.84
42.84
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
75.6
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
8
8
8
8
8*
8
8
8
8
8
8
8
8
8
8
8*
8*
8*
8*
8*
8*
8*
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
8
8
8
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
40
70
70
80
150
70
150
25
35
40
70
80
55
70
100
200
100
70
70
45
35
25
70
55
15
18
25
35
40
45
70
55
40
9
12
15
45
25
45
35
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
µF
KEMET/EIA
(See below for
part options)
47
47
47
47
68
68
68
68
68
68
68
68
68
68
68
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
120
B/3528-21
B/3528-21
B/3528-21
B/3528-21
A/3216-18
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
U/6032-15
C/6032-28
I/3216-10
I/3216-10
I/3216-10
A/3216-18
A/3216-18
A/3216-18
A/3216-18
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
W/7343-15
V/7343-19
V/7343-19
V/7343-19
V/7343-19
C/6032-28
C/6032-28
B/3528-21
T520B476M006A(1)E040
T520B476M006A(1)E070
T525B476M006A(1)E070
T525B476M006A(1)E080
T520A686M006A(1)E150 ^
T520T686M006A(1)E070
T520T686M006A(1)E150
T520B686M006A(1)E025
T520B686M006A(1)E035
T520B686M006A(1)E040
T520B686M006A(1)E070
T525B686M006A(1)E080
T520U686M006A(1)E055
T520U686M006A(1)E070
T520C686M006A(1)E100
T527I107M006ATE200 ^
T527I107M006ATE100 ^
T527I107M006ATE070 ^
T520A107M006ATE070 ^
T520A107M006ATE045 ^
T520A107M006ATE035 ^
T520A107M006ATE025 ^
T520T107M006APE070
T520T107M006APE055
T520B107M006A(1)E015
T520B107M006A(1)E018
T520B107M006A(1)E025
T520B107M006A(1)E035
T520B107M006A(1)E040
T520B107M006A(1)E045
T520B107M006A(1)E070
T520U107M006A(1)E055
T520W107M006A(1)E040
T520V107M006A(1)E009
T520V107M006A(1)E012
T520V107M006A(1)E015
T520V107M006A(1)E045
T520C107M006A(1)E025
T520C107M006A(1)E045
T520B127M006A(1)E035
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
1,800
1,300
1,300
1,300
900
1,200
800
2,300
1,900
1,800
1,300
1,300
1,600
1,400
1,300
775
775
1,134
1,035
1,600
1,500
1,732
1,200
1,200
2,900
2,700
2,300
1,900
1,800
1,700
1,300
1,600
2,100
4,600
3,900
3,500
2,000
2,600
1,900
1,900
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
125
125
105
105
105
105
105
105
105
125
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
17
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
138.6
138.6
138.6
138.6
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
8
8
8
8
9
8
8
8
8
8
8*
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
8
8
8
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
35
70
150
200
18
25
35
45
70
30
35
15
25
45
55
45
55
12
25
25
40
6
7
9
12
15
18
25
40
45
6
7
15
25
25
55
25
35
45
70
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
µF
KEMET/EIA
(See below for
part options)
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
220
220
220
220
M/3528-15
M/3528-15
M/3528-15
M/3528-15
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
T/3528-12
T/3528-12
C/6032-28
C/6032-28
C/6032-28
C/6032-28
U/6032-15
U/6032-15
L/6032-19
L/6032-19
W/7343-15
W/7343-15
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
B/3528-21
B/3528-21
B/3528-21
B/3528-21
T520M157M006A(1)E035
T520M157M006A(1)E070
T520M157M006A(1)E150
T520M157M006A(1)E200
T520B157M006A(1)E018
T520B157M006A(1)E025
T520B157M006A(1)E035
T520B157M006A(1)E045
T520B157M006A(1)E070
T523T157M006APE030
T520T157M006ATE035 ^
T520C157M006A(1)E015
T520C157M006A(1)E025
T520C157M006A(1)E045
T520C157M006A(1)E055
T520U157M006A(1)E045
T520U157M006A(1)E055
T520L157M006A(1)E012
T520L157M006A(1)E025
T520W157M006A(1)E025
T520W157M006A(1)E040
T520V157M006A(1)E006
T520V157M006A(1)E007
T520V157M006A(1)E009
T520V157M006A(1)E012
T520V157M006A(1)E015
T520V157M006A(1)E018
T520V157M006A(1)E025
T520V157M006A(1)E040
T520V157M006A(1)E045
T520D157M006A(1)E006
T520D157M006A(1)E007
T520D157M006A(1)E015
T520D157M006A(1)E025
T525D157M006A(1)E025
T520D157M006A(1)E055
T520B227M006A(1)E025
T520B227M006A(1)E035
T520B227M006A(1)E045
T520B227M006A(1)E070
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
1,900
1,300
900
800
2,700
2,300
1,900
1,700
1,300
1,870
1,700
3,300
2,600
1,900
1,700
1,700
1,600
3,500
2,400
2,700
2,100
5,600
5,200
4,600
3,900
3,500
3,200
2,700
2,200
2,000
6,100
5,700
3,900
3,000
3,000
2,000
2,300
1,900
1,700
1,300
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
125
105
105
105
105
105
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
18
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
138.6
207.9
208
207.9
207.9
207.9
207.9
207.9
207.9
207.9
207.9
207.9
207.9
207.9
207.9
207.9
207.9
207.9
207.9
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
8
8
8
8
10
10
10
10
10
10
10
8
10
8
10
10
10
10
10
10
10
10
8
8
10
10
10
10
10
8
10
10
8
10
10
10
10
10
10
10
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
15
18
25
45
7
9
12
15
18
25
40
5
6
6
7
9
15
18
25
25
40
50
40
70
15
18
25
40
45
6
9
10
10
15
18
25
25
40
40
45
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
µF
KEMET/EIA
(See below for
part options)
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
330
C/6032-28
C/6032-28
C/6032-28
C/6032-28
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
B/3528-21
B/3528-21
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
T520C227M006A(1)E015
T520C227M006A(1)E018
T520C227M006A(1)E025
T520C227M006A(1)E045
T520V227M006A(1)E007
T520V227M006A(1)E009
T520V227M006A(1)E012
T520V227M006A(1)E015
T520V227M006A(1)E018
T520V227M006A(1)E025
T520V227M006A(1)E040
T530D227M006A(1)E005
T520D227M006A(1)E006
T530D227M006A(1)E006
T520D227M006A(1)E007
T520D227M006A(1)E009
T520D227M006A(1)E015
T520D227M006A(1)E018
T520D227M006A(1)E025
T525D227M006A(1)E025
T520D227M006A(1)E040
T520D227M006A(1)E050
T520B337M006A(1)E040
T520B337M006A(1)E070
T520V337M006A(1)E015
T520V337M006A(1)E018
T520V337M006A(1)E025
T520V337M006A(1)E040
T520V337M006A(1)E045
T530D337M006A(1)E006
T520D337M006A(1)E009
T520D337M006A(1)E010
T530D337M006A(1)E010
T520D337M006A(1)E015
T520D337M006A(1)E018
T520D337M006A(1)E025
T525D337M006A(1)E025
T520D337M006A(1)E040
T525D337M006A(1)E040
T520D337M006A(1)E045
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
3,300
3,000
2,600
1,900
5,200
4,600
3,900
3,500
3,200
2,700
2,200
7,100
6,100
6,500
5,700
5,000
3,900
3,500
3,000
3,000
2,400
2,100
1,800
1,300
3,500
3,200
2,700
2,200
2,000
6,500
5,000
4,700
5,000
3,900
3,500
3,000
3,000
2,400
2,400
2,200
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
105
105
105
105
105
125
105
125
105
105
105
105
105
125
105
105
85
85
105
105
105
105
105
125
105
105
125
105
105
105
125
105
125
105
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
19
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
207.9
207.9
207.9
207.9
207.9
207.9
207.9
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
296.1
428.4
428.4
428.4
428.4
428.4
428.0
428.0
630.0
756.0
945.0
17.6
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
8
8
10
8
10
10
10
10
9
10
10
8
10
10
10
10
10
10
10
10
10
8
8
8
10
8
10
10
10
10
10
8
8
10
10
10
20
20
20
8
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
5
6
10
10
15
25
40
55
35
55
35
5
10
15
18
25
35
35
15
25
30
4
5
6
10
10
18
35
40
18
25
10
18
25
18
70
55
70
55
70
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
8
µF
KEMET/EIA
(See below for
part options)
330
330
330
330
330
330
330
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
470
680
680
680
680
680
680
680
1000
1200
1500
22
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
W/7343-15
W/7343-15
V/7343-19
V/7343-19
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
J/7360-15
H/7360-20
H/7360-20
H/7360-20
T/3528-12
T530Y337M006A(1)E005
T530Y337M006A(1)E006
T520Y337M006A(1)E010
T530Y337M006A(1)E010
T520Y337M006A(1)E015
T520Y337M006A(1)E025
T520Y337M006A(1)E040
T520W477M006A(1)E055
T520W477M006A(1)E035
T520V477M006A(1)E055
T520V477M006A(1)E035
T530Y477M006A(1)E005
T520Y477M006A(1)E010
T520Y477M006A(1)E015
T520Y477M006A(1)E018
T520Y477M006A(1)E025
T520Y477M006A(1)E035
T525Y477M006A(1)E035
T520D477M006A(1)E015
T520D477(2)006A(1)E025
T520D477M006A(1)E030
T530X477M006A(1)E004
T530X477M006A(1)E005
T530X477M006A(1)E006
T520X477M006A(1)E010
T530X477M006A(1)E010
T520X477M006A(1)E018
T520X477M006A(1)E035
T520X477M006A(1)E040
T520Y687M006A(1)E018
T520Y687M006A(1)E025
T530X687M006A(1)E010
T530X687M006A(1)E018
T520X687M006A(1)E025
T520X687M006A(1)E018
T523J687M006APE070
T520H108M006A(1)E055
T520H128M006A(1)E070
T520H158M006A(1)E055
T520T226M008A(1)E070
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
7,300
6,600
4,900
5,100
4,000
3,100
2,500
1,800
2,300
1,800
2,300
7,300
4,900
4,000
3,700
3,100
2,600
2,600
3,900
3,000
2,700
8,200
7,300
6,700
5,000
5,200
3,700
2,700
2,500
3,700
3,100
5,200
3,900
3,100
3,700
2,510
1,800
1,200
1,800
1,200
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
125
125
105
125
105
105
105
85
85
105
105
125
105
105
105
105
105
125
105
105
105
125
125
125
105
125
105
105
105
105
105
125
125
105
105
85
85
85
85
105
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
20
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
26.4
26.4
26.4
26.4
26.4
26.4
26.4
26.4
37.6
37.6
65.6
65.6
120
120
120
120
30
10
10
15
66
66
22
22
22
33
33
33
33
33
33
33
33
33
33
33
47
47
47
47
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
6*
8*
8
8*
6*
6*
8*
8*
8
6*
8
8
8
8
8
8
8
8
8
8
6*
8*
8
8
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
70
80
80
25
35
40
70
70
35
70
25
45
25
40
55
40
200
80
80
80
150
200
200
80
80
200
40
70
80
80
25
35
40
70
80
70
200
45
35
70
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
µF
KEMET/EIA
(See below for
part options)
33
33
33
33
33
33
33
33
47
47
82
82
150
150
150
150
10
10
10
15
22
22
22
22
22
33
33
33
33
33
33
33
33
33
33
33
47
47
47
47
T/3528-12
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
B/3528-21
B/3528-21
C/6032-28
C/6032-28
D/7343-31
D/7343-31
D/7343-31
V/7343-19
P/2012-10
A/3216-18
A/3216-18
A/3216-18
P/2012-10
P/2012-10
I/3216-10
A/3216-18
B/3528-21
I/3216-10
T/3528-12
T/3528-12
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
U/6032-15
I/3216-10
A/3216-18
B/3528-21
B/3528-21
T520T336M008A(1)E070
T520T336M008A(1)E080
T525T336M008A(1)E080
T520B336M008A(1)E025
T520B336M008A(1)E035
T520B336M008A(1)E040
T520B336M008A(1)E070
T520U336M008A(1)E070
T520B476M008A(1)E035
T520B476M008A(1)E070
T520C826M008A(1)E025
T520C826M008A(1)E045
T520D157M008A(1)E025
T520D157M008A(1)E040
T520D157M008A(1)E055
T520V157M008A(1)E040
T529P106M010AAE200 ^
T520A106M010A(1)E080 ^
T525A106M010A(1)E080 ^
T520A156M010A(1)E080 ^
T529P226M010AAE150 ^
T529P226M010AAE200 ^
T527I226M010ATE200 ^
T520A226M010A(1)E080 ^
T525B226M010A(1)E080
T527I336M010ATE200 ^
T520T336M010A(1)E040
T520T336M010A(1)E070
T520T336M010A(1)E080
T525T336M010A(1)E080
T520B336M010A(1)E025
T520B336M010A(1)E035
T520B336M010A(1)E040
T520B336M010A(1)E070
T525B336M010A(1)E080
T520U336M010A(1)E070
T527I476M010ATE200 ^
T520A476M010ATE045 ^
T520B476M010A(1)E035
T520B476M010A(1)E070
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
1,200
1,100
1,100
2,300
1,900
1,800
1,300
1,400
1,900
1,300
2,600
1,900
3,000
2,400
2,000
2,200
354
1,200
1,200
1,200
408
354
548
1,200
1,300
548
1,600
1,200
1,100
1,100
2,300
1,900
1,800
1,300
1,300
1,400
548
1,291
1,900
1,300
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
125
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
125
105
105
105
105
105
125
105
105
105
105
125
105
105
105
105
125
105
105
105
105
105
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
21
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
47
47
68
68
68
68
68
68
68
68
68
68
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
150
150
150
150
150
150
150
150
150
150
150
150
150
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
8
8
8
10
10
8
10
10
10
10
10
10
8*
8
8
8
10
10
10
10
10
10
10
10
10
10
10
8
10
10
10
8
8
8
10
10
10
10
10
10
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
55
100
55
25
40
45
25
40
45
60
100
100
70
25
45
25
40
18
25
45
50
55
18
25
55
55
80
55
18
25
40
5
6
10
15
18
25
25
40
55
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
µF
KEMET/EIA
(See below for
part options)
47
47
68
68
68
68
68
68
68
68
68
68
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
150
150
150
150
150
150
150
150
150
150
150
150
150
U/6032-15
C/6032-28
U/6032-15
W/7343-15
W/7343-15
C/6032-28
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
B/3528-21
C/6032-28
C/6032-28
L/6032-19
W/7343-15
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
C/6032-28
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
T520U476M010A(1)E055
T520C476M010A(1)E100
T520U686M010A(1)E055
T520W686M010A(1)E025
T520W686M010A(1)E040
T520C686M010A(1)E045
T520V686M010A(1)E025
T520V686M010A(1)E040
T520V686M010A(1)E045
T520V686M010A(1)E060
T520V686M010A(1)E100
T520D686M010A(1)E100
T520B107M010ATE070 ^
T520C107M010A(1)E025
T520C107M010A(1)E045
T520L107M010A(1)E025
T520W107M010A(1)E040
T520V107M010A(1)E018
T520V107M010A(1)E025
T520V107M010A(1)E045
T520V107M010A(1)E050
T520V107M010A(1)E055
T520D107M010A(1)E018
T525D107M010A(1)E025
T520D107M010A(1)E055
T525D107M010A(1)E055
T520D107M010A(1)E080
T520C157M010A(1)E055
T520V157M010A(1)E018
T520V157M010A(1)E025
T520V157M010A(1)E040
T530D157M010A(1)E005
T530D157M010A(1)E006
T530D157M010A(1)E010
T520D157M010A(1)E015
T520D157M010A(1)E018
T520D157M010A(1)E025
T525D157M010A(1)E025
T520D157M010A(1)E040
T520D157M010A(1)E055
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
1,600
1,300
1,600
2,700
2,100
1,900
2,700
2,200
2,000
1,800
1,400
1,500
1,300
2,600
1,900
2,400
2,100
3,200
2,700
2,000
1,900
1,800
3,500
3,000
2,000
2,000
1,700
1,700
3,200
2,700
2,200
7,100
6,500
5,000
3,900
3,500
3,000
3,000
2,400
2,000
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
125
105
125
105
105
105
105
105
125
125
125
105
105
105
125
105
105
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
22
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
150
150
150
150
220
220
220
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
330
330
330
330
330
470
820
330
52
12.5
18.75
58.8
80
16
16
24
70.4
35.2
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
10
10
10
10
10
10
10
8
8
10
10
10
10
8
10
10
10
10
10
8
8
8
10
8
10
10
10
10
20
10
10
8
8
8
6*
8
8
8
10 *
8
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
55
15
18
25
40
45
25
6
10
18
25
25
40
6
40
15
25
35
35
4
5
6
10
10
25
35
70
70
70
40
40
150
80
90
150
100
100
90
200
90
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
11
12.5
12.5
12.5
16
16
16
16
16
16
µF
KEMET/EIA
(See below for
part options)
150
150
150
150
220
220
220
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
330
330
330
330
330
470
820
330
47
10
15
47
10
10
10
15
22
22
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
Y/7343-40
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
J/7360-15
J/7360-15
H/7360-20
X/7343-43
Q/7343-12
T/3528-12
T/3528-12
T/3528-12
P/2012-10
B/3528-21
B/3528-21
B/3528-21
3216-08
B/3528-21
T525D157M010A(1)E055
T520Y157M010A(1)E015
T520Y157M010A(1)E018
T520Y157M010A(1)E025
T520V227M010A(1)E040
T520V227M010A(1)E045
T520V227M010A(1)E025
T530D227M010A(1)E006
T530D227M010A(1)E010
T520D227M010A(1)E018
T520D227M010A(1)E025
T525D227M010A(1)E025
T520D227M010A(1)E040
T530Y227M010A(1)E006
T520Y227M010A(1)E040
T520Y337M010A(1)E015
T520Y337M010A(1)E025
T520Y337M010A(1)E035
T525Y337M010A(1)E035
T530X337M010A(1)E004
T530X337M010A(1)E005
T530X337M010A(1)E006
T520X337M010A(1)E010
T530X337M010A(1)E010
T520X337M010A(1)E025
T520X337M010A(1)E035
T523J337M010APE070
T523J477M010APE070
T520H827M010A(1)E070
T520X337M010A(1)E040
T520Q476M011A(1)E040
T520T106M12RA(1)E150
T520T156M12RA(1)E080
T521T476M12RA(1)E090
T529P106M016AAE150 ^
T520B106M016A(1)E100
T521B106M016A(1)E100
T521B156M016A(1)E090
TF08A226M016APE200 ^
T521B226M016A(1)E090
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
2,000
4,000
3,700
3,100
2,200
2,000
2,700
6,500
5,000
3,500
3,000
3,000
2,400
6,600
2,500
4,000
3,100
2,600
2,600
8,200
7,300
6,700
5,000
5,200
3,100
2,700
2,510
2,510
1,200
2,500
4,500
800
1,100
1,330
408
1,100
1,410
1,490
548
1,490
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
125
105
105
105
105
105
105
125
125
105
105
125
105
125
105
105
105
105
125
125
125
125
105
125
105
105
85
85
85
105
105
105
105
105
105
105
125
105
105
105
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
23
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
35.2
52.8
52.8
52.8
52.8
52.8
52.8
52.8
52.8
52.8
52.8
52.8
75.2
75.2
75.2
75.2
75.2
75.2
75.2
75.2
75.2
75.2
75.2
75.2
75.2
75.2
75.2
75.2
75.2
75.2
108.8
108.8
108.8
108.8
108.8
108.8
108.8
160
160
160
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
8
8
10
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
80
45
50
70
90
70
90
40
45
45
60
70
40
45
45
40
45
55
70
70
80
35
35
40
45
55
65
70
70
90
50
70
100
40
50
90
50
50
70
100
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
µF
KEMET/EIA
(See below for
part options)
22
33
33
33
33
33
33
33
33
33
33
33
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
68
68
68
68
68
68
68
100
100
100
C/6032-28
T/3528-12
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
Q/7343-12
W/7343-15
V/7343-19
V/7343-19
V/7343-19
W/7343-15
W/7343-15
W/7343-15
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
W/7343-15
W/7343-15
W/7343-15
V/7343-19
V/7343-19
V/7343-19
D/7343-31
W/7343-15
W/7343-15
W/7343-15
T520C226M016A(1)E080
T521T336M016A(1)E045
T521T336M016A(1)E050
T521B336M016A(1)E070
T521B336M016A(1)E090
T525B336M016A(1)E070
T525B336M016A(1)E090
T521Q336M016A(1)E040
T520W336M016A(1)E045
T520V336M016A(1)E045
T520V336M016A(1)E060
T520V336M016A(1)E070
T521W476M016A(1)E040
T520W476M016A(1)E045
T521W476M016A(1)E045
T521V476M016A(1)E040
T520V476M016A(1)E045
T521V476M016A(1)E055
T520V476M016A(1)E070
T521V476M016A(1)E070
T521V476M016A(1)E080
T520D476M016A(1)E035
T525D476M016A(1)E035
T521D476M016A(1)E040
T521D476M016A(1)E045
T521D476M016A(1)E055
T525D476M016A(1)E065
T520D476M016A(1)E070
T521D476M016A(1)E070
T521D476M016A(1)E090
T523W686M016APE050
T523W686M016APE070
T523W686M016APE100
T521V686M016A(1)E040
T521V686M016A(1)E050
T521V686M016A(1)E090
T520D686M016A(1)E050
T523W107M016APE050
T523W107M016APE070
T523W107M016APE100
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
1,400
1,890
1,790
1,690
1,490
1,300
1,200
2,500
2,000
2,000
1,800
1,600
2,530
2,000
2,380
2,560
2,000
2,220
1,600
1,960
1,840
2,500
2,500
2,810
2,650
2,390
1,900
1,800
2,120
1,870
2,820
2,376
1,988
2,600
2,320
1,730
2,100
2,820
2,376
1,988
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
105
105
105
105
105
125
125
105
105
105
105
105
105
105
105
125
105
125
105
125
125
105
125
125
125
125
125
105
125
125
105
105
105
125
125
125
105
105
105
105
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
24
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
160
160
160
240
240
240
240
240
240
240
240
240
240
352
352
352
352
352
352
352
528
528
528
528
20
30
44
44
44
44
44
44
44
44
132
94
94
94
94
94
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
10
10
10
10
10
10
10
10
8
8
10
8
10
10
10
10
10
10
10
10
10
10
10
10
8
10
8
10
10
10
10
10
10
10
10 *
9
9
10
10
10
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
40
50
50
50
70
100
50
40
15
25
40
40
80
25
35
50
35
50
70
70
15
25
50
70
100
90
90
40
55
70
40
45
90
90
90
40
45
90
80
55
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
µF
KEMET/EIA
(See below for
part options)
100
100
100
150
150
150
150
150
150
150
150
150
150
220
220
220
220
220
220
220
330
330
330
330
10
15
22
22
22
22
22
22
22
22
33
47
47
47
47
47
V/7343-19
V/7343-19
D/7343-31
W/7343-15
W/7343-15
W/7343-15
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
H/7360-20
J/7360-15
X/7343-43
X/7343-43
X/7343-43
H/7360-20
B/3528-21
B/3528-21
B/3528-21
W/7343-15
W/7343-15
W/7343-15
V/7343-19
V/7343-19
V/7343-19
V/7343-19
B/3528-21
W/7343-15
W/7343-15
V/7343-19
V/7343-19
V/7343-19
T521V107M016A(1)E040
T521V107M016A(1)E050
T521D107M016A(1)E050
T523W157M016APE050
T523W157M016APE070
T523W157M016APE100
T521D157M016A(1)E050
T521D157M016A(1)E040
T530X157M016A(1)E015
T530X157M016A(1)E025
T520X157M016A(1)E040
T530X157M016A(1)E040
T521X157M016A(1)E080
T521D227M016A(1)E025
T521D227M016A(1)E035
T521D227M016A(1)E050
T521X227M016A(1)E035
T521X227M016A(1)E050
T523H227M016APE070
T523J227M016APE070
T521X337M016A(1)E015
T521X337M016A(1)E025
T521X337M016A(1)E050
T523H337M016APE070
T521B106M020A(1)E100
T521B156M020A(1)E090
T521B226M020A(1)E090
T521W226(2)020A(1)E040
T521W226(2)020A(1)E055
T521W226(2)020A(1)E070
T520V226M020A(1)E040
T520V226M020A(1)E045
T520V226M020A(1)E090
T521V226M020A(1)E090
T521B336M020ATE090 ^
T521W476M020A(1)E040
T521W476K020A(1)E045
T521V476M020A(1)E090
T521V476M020A(1)E080
T521V476M020A(1)E055
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
2,600
2,320
2,510
2,820
2,376
1,988
2,510
2,810
4,200
3,300
2,500
2,600
2,240
3,550
3,000
2,510
3,380
2,830
2,510
2,510
5,160
4,000
2,830
2,510
1,410
1,490
1,490
2,530
2,150
1,910
2,200
2,000
1,400
1,730
972
2,530
2,380
1,730
1,840
2,220
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
125
125
105
105
105
105
105
105
125
125
105
125
105
125
125
125
125
125
85
85
125
125
125
85
125
105
105
105
105
105
105
105
105
125
105
105
105
125
125
125
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
25
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
94
94
136
136
200
200
200
300
300
35.3
34
50
50
25
25
25
37.5
112.5
37.5
37.5
37.5
37.5
37.5
55
55
55
55
55
55
55
82.5
82.5
82.5
82.5
82.5
82.5
117.5
117.5
170
250
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
10
10
10
10
10
10
10
10
10
10 *
8*
10 *
10 *
8
8
8
8
10 *
10
10
10
10
10
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
55
40
50
100
100
55
55
65
50
300
100
150
100
100
100
60
100
100
90
90
40
60
80
100
40
70
40
45
60
90
100
25
60
40
40
60
100
65
70
40
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
20
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
µF
KEMET/EIA
(See below for
part options)
47
47
68
68
100
100
100
150
150
4.7
6.8
10
10
10
10
10
15
15
15
15
15
15
15
22
22
22
22
22
22
22
33
33
33
33
33
33
47
47
68
100
D/7343-31
D/7343-31
V/7343-19
V/7343-20
W/7343-15
V/7343-19
D/7343-31
D/7343-31
D/7343-31
P/2012-10
T/3528-12
S/3216-12
M/3528-15
B/3528-21
T/3528-12
T/3528-12
B/3528-21
T/3528-12
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
B/3528-21
W/7343-15
W/7343-15
V/7343-19
V/7343-19
V/7343-19
V/7343-19
W/7343-15
V/7343-19
V/7343-19
V/7343-19
D/7343-31
D/7343-31
V/7343-20
D/7343-31
D/7343-31
D/7343-31
T521D476M020A(1)E055
T521D476M020A(1)E040
T521V686M020A(1)E050
T523V686M020APE100
T523W107M020APE100
T521V107M020A(1)E055
T521D107(2)020A(1)E055
T521D157M020A(1)E065
T521D157M020A(1)E050
T529P475M025AAE300 ^
T521T685M025ATE100 ^
T527S106M025ATE150 ^
T521M106M025ATE100 ^
T521B106M025A(1)E100
T521T106M025A(1)E100
T521T106M025A(1)E060
T521B156M025A(1)E100
T527T156M025ATE100 ^
T520V156M025A(1)E090
T521V156M025A(1)E090
T521V156M025A(1)E040
T520D156M025A(1)E060
T520D156M025A(1)E080
T521B226M025A(1)E100
T521W226M025A(1)E040
T521W226M025A(1)E070
T521V226M025A(1)E040
T521V226M025A(1)E045
T521V226M025A(1)E060
T521V226M025A(1)E090
T523W336M025APE100
T521V336M025A(1)E025
T521V336M025A(1)E060
T521V336M025A(1)E040
T521D336M025A(1)E040
T521D336M025A(1)E060
T523V476M025APE100
T521D476M025A(1)E065
T521D686M025A(1)E070
T521D107M025A(1)E040
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
2,390
2,810
2,320
1,400
1,988
2,220
2,390
2,200
2,510
289
866
632
922
1,410
1,270
1,630
1,410
866
1,400
1,730
2,560
1,900
1,700
1,410
2,530
1,910
2,560
2,450
2,120
1,730
1,988
3,290
2,120
2,560
2,810
2,290
1,400
2,200
2,120
2,810
Reflow Temp
≤ 260°C
°C
3
3
3
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
3
3
3
3
3
4
3
3
3
125
125
105
105
105
125
105
105
105
105
105
105
105
125
125
125
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
125
125
105
125
125
125
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
26
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
250
250
250
250
11.6
11.6
16.5
16.5
23.8
23.8
23.8
35
35
35
52.5
52.5
77
77
77
115.5
115.5
164.5
164.5
164.5
164.5
164.5
238
3.4
5
7.5
11
16.5
28
28
28
28
34
34
34
34
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
10
10
10
10
8
8
8
8
10
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
8
8
8
8
10
10
10
10
10
10
10
10
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
50
60
30
60
150
200
150
200
90
150
200
150
200
120
100
125
100
40
60
100
65
100
30
70
90
100
50
200
200
200
200
200
70
90
70
90
70
90
70
90
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
25
25
25
25
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
50
50
50
50
50
50
50
50
50
50
50
50
50
µF
KEMET/EIA
(See below for
part options)
100
100
100
100
3.3
3.3
4.7
4.7
6.8
6.8
6.8
10
10
10
15
15
22
22
22
33
33
47
47
47
47
47
68
0.68
1
1.5
2.2
3.3
5.6
5.6
5.6
5.6
6.8
6.8
6.8
6.8
D/7343-31
D/7343-31
X/7343-43
X/7343-43
B/3528-21
B/3528-21
B/3528-21
B/3528-21
T/3528-12
B/3528-21
B/3528-21
B/3528-21
B/3528-21
V/7343-19
V/7343-19
V/7343-19
W/7343-15
D/7343-31
D/7343-31
V/7343-20
D/7343-31
V/7343-20
X/7343-43
X/7343-43
W/7343-15
W/7343-15
X/7343-43
B/3528-21
B/3528-21
B/3528-21
B/3528-21
B/3528-21
D/7343-31
D/7343-31
V/7343-19
V/7343-19
D/7343-31
D/7343-31
V/7343-19
V/7343-19
T521D107M025A(1)E050
T521D107M025A(1)E060
T521X107M025A(1)E030
T521X107M025A(1)E060
T521B335M035A(1)E150
T521B335M035A(1)E200
T521B475M035A(1)E150
T521B475M035A(1)E200
T521T685M035APE090
T521B685M035A(1)E150
T521B685M035A(1)E200
T521B106M035A(1)E150
T521B106M035A(1)E200
T521V106M035A(1)E120
T521V156M035A(1)E100
T521V156M035A(1)E125
T523W226M035APE100
T521D226M035A(1)E040
T521D226M035A(1)E060
T523V336M035APE100
T521D336M035A(1)E065
T523V476M035APE100
T521X476M035A(1)E030
T521X476M035A(1)E070
T523W476M035APE090
T523W476M035APE100
T521X686M035A(1)E050
T521B684M050A(1)E200
T521B105M050A(1)E200
T521B155M050A(1)E200
T521B225M050A(1)E200
T521B335M050A(1)E200
T521D565M050A(1)E070
T521D565M050A(1)E090
T521V565M050A(1)E070
T521V565M050A(1)E090
T521D685M050A(1)E070
T521D685M050A(1)E090
T521V685M050A(1)E070
T521V685M050A(1)E090
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
2,510
2,290
3,650
2,580
1,160
1,000
1,160
1,000
1,330
1,160
1,000
1,160
1,000
1,500
1,640
1,470
1,988
2,810
2,290
1,400
2,200
1,400
3,650
2,390
2,100
1,988
2,830
1,000
1,000
1,000
1,000
1,000
2,120
1,870
1,960
1,730
2,120
1,870
1,960
1,730
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
3
3
4
3
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
125
125
105
105
105
105
105
105
125
105
105
105
105
125
125
125
105
125
125
105
125
105
125
125
105
105
125
105
105
105
105
105
125
125
125
125
125
125
125
125
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
27
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 1 – Ratings & Part Number Reference cont.
Rated
Voltage
VDC at
105°C
Rated
Capacitance
Case
Code/
Case
Size
KEMET Part
Number
DC
Leakage
DF
ESR
µA at 25°C
Maximum/
5 Minutes
50
50
50
90
90
90
90
110
110
110
165
165
4.3
6.3
9.5
29.6
29.61
29.6
42.8
63
94.5
94.5
138.6
35.3
75
112.5
µA at 25°C
Maximum/
5 Minutes
% at 25°C
120 Hz
Maximum
10
10
10
10
10
10
10
10
10
10
10
10
8
8
8
6
10
10
10
10
10
10
10
10
10
10
% at 25°C
120 Hz
Maximum
mΩ at 25°C
100 kHz
Maximum
90
120
90
90
70
50
35
90
75
50
75
50
200
200
200
200
300
75
75
50
35
150
75
75
50
35
mΩ at 25°C
100 kHz
Maximum
DC
Leakage
DF
ESR
Not all
parts are
105°C rated
50
50
50
50
50
50
50
50
50
50
50
50
63
63
63
63
63
63
63
63
63
63
63
75
75
75
µF
KEMET/EIA
(See below for
part options)
10
10
10
18
18
18
18
22
22
22
33
33
0.68
1
1.5
4.7
4.7
4.7
6.8
10
15
15
22
4.7
10
15
D/7343-31
D/7343-31
V/7343-19
D/7343-31
X/7343-43
X/7343-43
X/7343-43
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
B/3528-21
B/3528-21
B/3528-21
C/6032-28
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
D/7343-31
X/7343-43
X/7343-43
T521D106M050A(1)E090
T521D106M050A(1)E120
T521V106M050A(1)E090
T521D186M050A(1)E090
T521X186M050A(1)E070
T521X186M050A(1)E050
T521X186M050A(1)E035
T521D226M050A(1)E090
T521X226M050A(1)E075
T521X226M050A(1)E050
T521X336M050A(1)E075
T521X336M050A(1)E050
T521B684M063A(1)E200
T521B105M063A(1)E200
T521B155M063A(1)E200
T521C475M063A(1)E200
T521D475M063A(1)E300
T521D475M063A(1)E075
T521D685M063A(1)E075
T521X106M063A(1)E050
T521X156M063A(1)E035
T521X156M063A(1)E150
T521X226M063A(1)E075
T521D475M075A(1)E075
T521X106M075A(1)E050
T521X156M075A(1)E035
VDC at 105°C
µF
KEMET/EIA
(See below for
part options)
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size
KEMET Part Number
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating
Temperature
(rms)
mA at +45°C
100 kHz
1,870
1,620
1,730
1,870
2,390
2,830
3,380
1,870
2,310
2,830
2,310
2,830
1,000
1,000
1,000
1,050
1,030
2,050
2,050
2,830
3,380
1,630
2,310
2,050
2,830
3,380
Reflow Temp
≤ 260°C
°C
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
125
125
125
125
125
125
125
125
125
125
125
125
105
105
105
105
125
125
125
125
125
125
125
125
125
125
mA at +45°C
100 kHz
Reflow Temp
≤ 260°C
°C
Maximum
Allowable
Ripple
Current
MSL
Maximum
Operating Temp
(1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100%
Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail.
(2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(3) To complete KEMET part number, insert 7105 for MSL4/7"reel or 7285 for MSL4/13"reel. Designate MSL4 labeling and reel size.
Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher
voltage rating. Substitutions can include better than series.
Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead.
Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part.
^ Denotes the large reel (13") is not available.
* DF measurement condition is 120 Hz/0.5 Vrms/1.5 V DC Bias
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
28
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Derating Guidelines
For Parts with Maximum Operational Temperature of 125°C
For Parts with Maximum Operational Temperature of 85°C
100%
90%
95%
85%
90%
80%
85%
75%
Recommended Application Voltage
70%
65%
60%
60%
55%
50%
−55
95%
% Rated Voltage
% Rated Voltage
95%
80%
75%
Rated Voltage
Recommended Application Voltage
70%
65%
60%
55%
25
85
Temperature°C
105
50%
−55
125
25
Temperature °C
85
For Parts with Maximum Operational Temperature of 105°C
90%
% Rated Voltage
85%
Recommended Application Voltage
80%
75%
Recommended Application Voltage for series: T523, T527, T529
70%
65%
60%
55%
50%
-55
25
Temperature °C
85
105
Recommended Application Voltage
KO-CAPs are solid state capacitors that demonstrate no wearout mechanism when operated within their recommended
guidelines. While the KO-CAP can be operated at full rated voltage, most circuit designers seek a minimum level of
assurance in long term reliability, which should be demonstrated with data. A voltage derating can provide the desired level
of demonstrated reliability based on industry accepted acceleration models. Since most applications do require long term
reliability, KEMET recommends that designers consider a voltage derating, according to the graphic above, for the maximum
steady state voltage.
Voltage
Rating
75 V ≤ VR
Maximum Recommended
Steady State Voltage
−55°C to 105°C
105°C to 125°C
90% of VR
60% of VR
VR = Rated Voltage
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
29
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation
capabilities of the device. Permissible AC ripple voltage, which may be applied is limited by two criteria:
a. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor.
b. The negative peak AC voltage, in combination with bias voltage, if any, must not exceed the allowable limits specified for
reverse voltage.
The maximum power dissipation must be reduced with increasing environmental operating temperatures. Refer to the table
below for temperature compensation requirements.
Temperature Compensation Multipliers for Maximum Ripple Current
Max Operational Temperature (Series)
85°C (T520, T523 )
−55°C < T ≤ 45°C
1.00
45°C < T ≤ 85°C
0.7
85°C < T ≤ 105°C
105°C < T ≤ 125°C
105°C (T520, T521, T523, T527, T529 , TF)
125°C (T525 , T530 )
125°C dedicated to T521
1.00
1.00
1.00
0.7
0.7
1.00
0.25
0.25
0.70
0.25
0.25
T= Environmental Temperature
Maximum Power Dissipation (Pmax) mWatts at 45°C with +30°C Rise
Case Code
EIA Case Code
T520/T525
T521
P
I/S
A
T
M
B
U
L
2012
3216
3216-18
3528-12
3528-15
3528-21
6032-15
6032-19
112
105
120
127
135
150
C
6032-28
165
220
W
V
D
Q
Y
X
J
H
7343-15
7343-20
7343-31
7343-12
7343-40
7343-43
7360-15
7360-20
180
187
225
170
241
247
255
270
315
245
T523
T527/T529
T530
25
60
160
120
200
105
395
423
255
263
270
400
187
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
75
440
440
T2076_T52X-530 • 2/22/2021
30
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Surge Voltage
Surge voltage is the maximum voltage (peak value) which may be applied to the capacitor. The surge voltage must not be
applied for periodic charging and discharging in course of normal operation and cannot be part of the application voltage.
Surge voltage capability is demonstrated by application of 1,000 cycles at operating temperature. The parts are charged
through a 33 Ohm resistor for 30 seconds and then discharged though a 33 Ohm resistor for each cycle.
Rated Voltage (V)
Surge Voltage (V)
Category Voltage (V)
Category Surge Voltage (V)
–55°C to 105°C
up to 125°C
2.5
3.3
1.7
2.2
6.3
8.2
4.2
5.5
10
13.0
6.7
8.7
16
20.8
10.7
13.9
20
26.0
13.4
17.4
25
32.5
16.8
21.8
35
45.5
23.5
30.5
50
65.0
33.5
43.6
Reverse Voltage
Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong
polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below
table.
Temperature
Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
55°C
10% of Rated Voltage
85°C
5% of Rated Voltage
105°C
3% of Rated Voltage
125°C*
1% of Rated Voltage
*For series rated to 125°C
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
31
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 2 – Land Dimensions/Courtyard
T520/T521/T525/T530
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
3528–21
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–28
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
7343–31
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
H
7360-20
4.25
2.77
3.67
10.22
7.30
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
L
6032-19
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
M
3528-15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
Q
7343-12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
V
7343–21
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X1
7343–43
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y1
7343–40
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow
solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform
qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2
Land pattern geometry is too small for silkscreen outline.
V1
L
L
W
W
V2
S
Grid Placement Courtyard
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
32
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Table 2 – Land Dimensions/Courtyard cont.
T523
KEMET
Metric
Size
Code
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
V
7343-20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
G
7360-12
4.60
3.07
3.07
10.22
7.30
4.48
2.67
3.27
9.12
6.80
4.38
2.29
3.43
8.26
6.54
J
7360-15
4.60
3.07
3.07
10.22
7.30
4.48
2.67
3.27
9.12
6.80
4.38
2.29
3.43
8.26
6.54
H
7360-20
4.60
3.07
3.07
10.22
7.30
4.48
2.67
3.27
9.12
6.80
4.38
2.29
3.43
8.26
6.54
Maximum (Most) Land
Protrusion (mm)
Median (Nominal) Land
Protrusion (mm)
Minimum (Least) Land
Protrusion (mm)
V1
L
L
W
V2
W
S
Grid Placement Courtyard
T527 / T529
KEMET
Metric
Size Code
Dimensions (mm)
Minimum – Maximum
Case
EIA
G
Z
X
Y
A08
3216-08
1.00 – 1.65
3.25 – 3.80
1.1 – 1.30
0.8 – 1.40
I
3216-10
1.00 – 1.65
3.25 – 3.80
1.10 – 1.30
0.80 – 1.40
S
3216-12
1.00 – 1.65
3.25 – 3.80
P
2012-10
0.40 – 1.05
2.05 – 2.60
1.10 – 1.30
0.80 – 1.00
0.80 – 1.40
0.50 – 1.10
(JEITA RC-2371 is recommended for reference)
X
X
Y
G
Z
Y
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
33
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Soldering Process
Please note that although the X/7343–43 case size can
withstand wave soldering, the tall profile (4.3 mm maximum)
dictates care in wave process development.
Hand soldering should be performed with care due to the
difficulty in process control. If performed, care should be
taken to avoid contact of the soldering iron to the molded
case. The iron should be used to heat the solder pad,
applying solder between the pad and the termination, until
reflow occurs. Once reflow occurs, the iron should be
removed immediately. “Wiping” the edges of a chip and
heating the top surface is not recommended.
Profile Feature
SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin)
100°C
150°C
Temperature Maximum (TSmax)
150°C
200°C
Time (ts) from Tsmin to Tsmax)
60 – 120 seconds
60 – 120 seconds
Ramp-up Rate (TL to TP)
3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (tL)
60 – 150 seconds
220°C*
235°C**
60 – 150 seconds
250°C*
260°C**
Peak Temperature (TP)
Time within 5°C of Maximum 20 seconds maximum 30 seconds maximum
Peak Temperature (tP)
Ramp-down Rate (TP to TL) 6°C/seconds maximum 6°C/seconds maximum
Time 25°C to Peak
6 minutes maximum
8 minutes maximum
Temperature
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
* For Case Size height > 2.5 mm
** For Case Size height ≤ 2.5 mm
TP
TL
Temperature
The KEMET families of surface mount capacitors are
compatible with wave (single or dual), convection, IR,
or vapor phase reflow techniques. Preheating of these
components is recommended to avoid extreme thermal
stress. KEMET's recommended profile conditions for
convection and IR reflow reflect the profile conditions of the
IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three reflow
passes at these conditions.
tP
Maximum Ramp-up Rate = 3°C/second
Maximum Ramp-down Rate = 6°C/second
tL
Tsmax
Tsmin
25
ts
25°C to Peak
Time
Storage
All KO-CAP Series are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC). These
parts are classified as MSL3 (Moisture Sensitivity Level 3) per IPC/JEDEC J–STD–020 and packaged per IPC/JEDEC
J–STD–033. MSL3 specifies a floor time of 168H at 30°C maximum temperature and 60% relative humidity. Unused
capacitors should be sealed in a MBB with fresh desiccant.
The calculated shelf life in a sealed bag would be 12 months from a bag seal date in a storage environment of < 40°C and
humidity < 90% RH. It should be 24 months from a bag seal date in a storage environment of < 30°C and humidity < 70% RH.
If baking is required, refer to IPC/JEDEC J–STD–033 for bake procedure.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
34
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Construction
T520/T521/T525/T530
Molded Epoxy
Case
Detailed Cross Section
Polarity Stripe (+)
Silver Paint
(Fourth Layer)
Polarity
Bevel (+)
Wire
Leadframe
(− Cathode)
Wire
Weld
(to attach wire)
Carbon
(Third Layer)
Silver Adhesive
Leadframe
(+ Anode)
Molded Epoxy
Case
Polymer
(Second Layer)
Ta2O5 Dielectric
(First Layer)
Tantalum
T523
Polarity Stripe (+)
Molded Epoxy
Case
Tantalum Wire
Leadframe
(- Cathode)
Spacer
Weld
(to attach wire)
Leadframe
(+ Anode)
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Detailed Cross Section
Carbon
(Third Layer)
Silver Paint
(Fourth Layer)
Polymer
(Second Layer)
Ta2O5 Dielectric
(First Layer)
Tantalum
Tantalum
Wire
T2076_T52X-530 • 2/22/2021
35
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Construction cont.
T527
Polarity Stripe (+)
Detailed Cross Section
Carbon
(Third Layer)
Silver Paint
(Fourth Layer)
Molded Epoxy
Case
Wire
Wire
Spacer
Leadframe
(− Cathode)
Silver
Adhesive
Polymer
(Second Layer)
Ta2O5 Dielectric
(First Layer)
Tantalum
Leadframe
(+ Anode)
Weld
(to attach wire)
T529
Polarity Stripe (+)
Molded Epoxy
Case
Detailed Cross Section
Carbon
(Third Layer)
Silver Paint
(Fourth Layer)
Wire
(− Cathode)
Polymer
(Second Layer)
Wire
Spacer
Substrate
Silver Adhesive
Weld
(to attach wire)
Ta2O5 Dielectric
(First Layer) Tantalum
(+ Anode)
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
36
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Capacitor Marking
T520/T521/T523/T525/T530
(KO)
KEMET
Organic
Polymer
Polarity
Indicator (+)
Date Code*
1 digit = Last number of Year
6 = 2016
7 = 2017
8 = 2018
9 = 2019
0 = 2020
2nd and 3rd digit = Week of the
Year
01 = 1st week of the Year to
52 = 52nd week of the Year
st
Picofarad
Code
KEMET
ID
Rated
Voltage
Date
Code*
* 011 = 11th week of 2020
T520A/T527
Polarity
Indicator (+)
Code
e
g
J
A
E
Rated Voltage
2.5 V
4V
6.3 V
10 V
25 V
Date
Code
Voltage and
Capacitance
Code
Code
A
E7
J7
N7
Capacitance
10
15
22
33
Code
S7
w
A8
J8
Capacitance
47
68
100
220
Date Code*
Year
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec
2017
A
B
C
D
E
F
G
H
J
K
L
M
2018
N
P
Q
R
S
T
U
V
W
X
Y
Z
2019
a
b
c
d
e
f
g
h
j
k
l
m
2020
n
p
q
r
s
t
u
v
w
x
y
z
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
37
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Capacitor Marking cont.
T520B/T521B/T520T
Polarity
Indicator (+)
Voltage and
Capacitance
Code
Code
e
g
J
A
C
D
E
Rated Voltage
2.5 V
4V
6.3 V
10 V
16 V
20 V
25 V
Code
E7
J7
N7
A8
Capacitance
15
22
33
100
Code
E8
J8
N8
S8
Capacitance
150
220
330
470
Code
J
A
C
E
Rated Voltage
6.3 V
10 V
16 V
25 V
Code
S
a
j
s
Capacitance (µF)
4.7
10
22
47
ID Code
Date Code
T529
Polarity
Indicator (+)
Date
Code
Voltage and
Capacitance
Code
Date Code*
Year
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec
2017
A
B
C
D
E
F
G
H
J
K
L
M
2018
N
P
Q
R
S
T
U
V
W
X
Y
Z
2019
a
b
c
d
e
f
g
h
j
k
l
m
2020
n
p
q
r
s
t
u
v
w
x
y
z
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
38
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Tape & Reel Packaging Information
KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with
EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system
is compatible with all tape-fed automatic pick-and-place systems.
Right hand
orientation
only
(+)
Embossed carrier
(−)
Embossment
Top tape thickness
0.10 mm (0.004”)
maximum thickness
180 mm (7.0”) or
330 mm (13.”)
8 mm (0.315”) or
12 mm (0.472”)
Table 3 – Packaging Quantity
Case Code
KEMET
P
R
08A
I
S
A
T
M
B
U
L
C
Q
W
Z
V
D
Y
X
J
H
O
EIA
2012-10
2012-12
3216-08
3216-10
3216-12
3216-18
3528-12
3528-15
3528-21
6032-15
6032-19
6032-28
7343-12
7343-15
7343-17
7343-19
7343-31
7343-40
7343-43
7360-15
7360-20
7360-43
Tape Width
(mm)
7" Reel*
13" Reel*
8
8
8
8
8
8
8
8
8
12
12
12
12
12
12
12
12
12
12
12
12
12
3,000
2,500
3,000
3,000
3,000
2,000
3,000
2,500
2,000
1,000
1,000
500
1,000
1,000
1,000
1,000
500
500
500
1,000
1,000
250
N/A
10,000
N/A
N/A
N/A
N/A
10,000
8,000
8,000
5,000
3,000
3,000
3,000
3,000
3,000
3,000
2,500
2,000
2,000
3,000
3,000
1,000
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
39
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
P2
T
T2
ØD0
P0
(10 pitches cumulative
tolerance on tape ±0.2 mm)
A0
E1
F
K0
B1
E2
B0
S1
W
P1
T1
Center Lines of Cavity
B1 is for tape feeder reference only,
including draft concentric about B0.
Embossment
For cavity size,
see Note 1, Table 4
ØD1
Cover Tape
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
12 mm
D1 Minimum
Note 1
D0
1.5 +0.10/−0.0
(0.059 +0.004/−0.0)
1.0
(0.039)
1.5
(0.059)
E1
P0
R Reference S1 Minimum
T1
T Maximum
Note 2
Note 3
Maximum
P2
1.75 ±0.10
4.0 ±0.10
2.0 ±0.05
(0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002)
25.0
(0.984)
30
(1.181)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
Variable Dimensions — Millimeters (Inches)
Tape Size
Pitch
B1 Maximum
Note 4
8 mm
Single (4 mm)
4.35
(0.171)
6.25
(0.246)
12 mm
Single (4 mm)
and Double
(8 mm)
8.2
(0.323)
10.25
(0.404)
E2 Minimum
F
P1
3.5 ±0.05
2.0 ±0.05 or 4.0 ±0.10
(0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004)
2.0 ±0.05 (0.079 ±0.002) or
5.5 ±0.05
4.0 ±0.10 (0.157 ±0.004) or
(0.217 ±0.002)
8.0 ±0.10 (0.315 ±0.004)
T2 Maximum W Maximum A0, B0 & K0
2.5
(0.098)
8.3
(0.327)
4.6
(0.181)
12.3
(0.484)
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
40
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 to 1.0 Newton (10 to 100 gf)
12 mm
0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be
165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of
300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Width (mm)
8, 12
Bo
Maximum
Rotation (
20
°
T)
°
s
Tape
Maximum
Width (mm) Rotation (
8, 12
20
Typical Component Centerline
°
S)
Ao
Figure 3 – Maximum Lateral Movement
Figure 4 – Bending Radius
8 and 12 mm Tape
0.5 mm maximum
0.5 mm maximum
Embossed
Carrier
Punched
Carrier
R
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Bending
Radius
R
T2076_T52X-530 • 2/22/2021
41
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Figure 5 – Reel Dimensions
Full Radius,
See Note
W3
(Includes
flange distortion
at outer edge)
Access Hole at
Slot Location
(Ø 40 mm minimum)
W2
D
A
(See Note)
N
C
(Arbor hole
diameter)
B
(see Note)
(Measured at hub)
W1
(Measured at hub)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
A
B Minimum
C
D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/−0.2
(0.521 +0.02/−0.008)
20.2
(0.795)
12 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
8 mm
12 mm
N Minimum
W1
W2 Maximum
W3
50
(1.969)
8.4 +1.5/−0.0
(0.331 +0.059/−0.0)
12.4 +2.0/−0.0
(0.488 +0.078/−0.0)
14.4
(0.567)
18.4
(0.724)
Shall accommodate tape
width without interference
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
42
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Punched Carrier
8 and 12 mm only
END
Round Sprocket Holes
START
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
Trailer
160 mm minimum
Components
100 mm
minimum Leader
400 mm minimum
Top Cover Tape
Figure 7 – Maximum Camber
Elongated Sprocket Holes
(32 mm and wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
43
KEMET Organic Capacitor (KO-CAP ®)
T52x/T530 Polymer Electrolytic Capacitors
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offices, please visit www.kemet.com/sales.
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
T2076_T52X-530 • 2/22/2021
44
工商网监
湘ICP备2023018690号
