T520X157M004ATE015

CONDUCTIVE POLYMER CHIP CAPACITORS T520 Series - KO Cap FEATURES Polymer Cathode Technology • Low ESR • High Frequency Cap Retention • No-Ignition Failure Mode • Use Up to 90% of Rated Voltage (10% Derating) for part types ≤ 10 Volts • Halogen Free Epoxy • 100% Accelerated Steady State Aging • Volumetrically Efficient • Use Up to 80% of Rated Voltage (20% Derating) for part types > 10 Volts • Capacitance 15 to 1000μF (±20%) • Voltage 2V to 25V • EIA Standard Case Sizes • 100% Surge Current Tested • Operating Temperature -55ºC to +105ºC • Self Healing Mechanism • RoHS Compiant & Leadfree Terminations (see www.kemet.com for lead transition) • ANODE (+) END VIEW BOTTOM VIEW OUTLINE DRAWING CATHODE (-) END VIEW W SIDE VIEW H K X S T G S E A L F DIMENSIONS - MILLIMETERS Case Size KEMET EIA A 3216-18 T 3528-12 B 3528-21 C 6032-28 U 6032-15 W 7343-15 V 7343-20 D 7343-31 Y 7343-40 X 7343-43 3.2 3.5 3.5 6.0 6.0 7.3 7.3 7.3 7.3 7.3 L ± 0.2 ± 0.2 ± 0.2 ± 0.3 ± 0.3 ± 0.3 ± 0.3 ± 0.3 ± 0.3 ± 0.3 1.6 2.8 2.8 3.2 3.2 4.3 4.3 4.3 4.3 4.3 W ± 0.2 ± 0.2 ± 0.2 ± 0.3 ± 0.3 ± 0.3 ± 0.3 ± 0.3 ± 0.3 ± 0.3 H 1.6 ± 0.2 1.2 max 1.9 ± 0.2 2.5 ± 0.3 1.5 max 1.5 max 1.9 max 2.8 ± 0.3 4.0 max 4.0 ± 0.3 K ± 0.20 0.9 0.3 0.9 1.4 0.5 0.6 0.9 1.5 1.9 2.3 F ± 0.1 1.2 2.2 2.2 2.2 2.2 2.4 2.4 2.4 2.4 2.4 S ± 0.3 0.8 0.8 0.8 1.3 1.3 1.3 1.3 1.3 1.3 1.3 X(Ref) 0.10 ± 0.10 0.05 0.10 ± 0.10 0.10 ± 0.10 0.05 0.05 0.05 0.10 ± 0.10 0.10 ± 0.10 0.10 ± 0.10 T(Ref) 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 A(Min) 1.4 2.1 2.1 3.1 3.1 3.8 3.8 3.8 3.8 3.8 G(ref) 1.1 1.8 1.8 2.8 2.8 3.5 3.5 3.5 3.5 3.5 E(ref) 1.3 2.2 2.2 2.4 2.4 3.5 3.5 3.5 3.5 3.5 T520 ORDERING INFORMATION T 520 V 157 M 006 A Tantalum Series T520 - Low ESR Polymer S E015 ESR Lead Material T - 100% Tin (Sn) Plated H - Tin/Lead (SnPb 5% Pb minimum) *S - Not recommended for new design Case Size A, T, B, C, V, W, D, Y, X Failure Rate A - Not Applicable Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. Voltage Capacitance Tolerance M = ± 20% *See www.kemet.com for Pb Free transition information. *Pb-free supply is not guaranteed with the ‘S’ termination code. This termination code not available effective 15 July 2007. COMPONENT MARKING KEMET Organic KO Polarity (+) Indicator Picofarad Code KEMET ID PWC *100% Tin Rated Voltage 157 6K 512 512 = 12th week of 2005 50 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 50 CONDUCTIVE POLYMER CHIP CAPACITORS T520 Series - KO Cap T520 RATINGS & PART NUMBER REFERENCE CapaciCase CapaciCase tance µF Size tance µF Size KEMET Part Number KEMET Part Number ESR ESR DF% DF% @ @ DCDC m@ mΩ @ 25°C Leakage 25°C Leakage 25°C 25°C 120 Hz µA @ 25°C µA @ 25°C 120 Hz 100 kHz Max 100 kHz Max Max Max Max Max Ripple Current Ripple Current Arms @ Arms @ 100 kHz Max 100 kHz Max w/ T=20°C w/Δ T=20°C @ -55°C @ -55°C to 85°C to 85°C w/ T= 2°C w/Δ T= 2°C @ 105°C @ 105°C 2 Volt Rating @ 105°C 2 Volt Rating @ 105°C T520V477M002A(1)E040 94 10 40 1.8 0.6 T520V477M002A(1)E040 2.5 Volt Rating @ 105°C 10 94 40 1.8 0.6 2.5 @ 47.0 A T520A476M2R5A(1)E090 Volt Rating12 105°C 8 90 0.9 0.3 47.0 AT T520A476M2R5A(1)E090 12 14 86 9040 0.9 0.3 56.0 T520T566M2R5A(1)E040 1.3 0.4 56.0 TT T520T566M2R5A(1)E040 14 14 68 4070 1.3 0.4 56.0 T520T566M2R5A(1)E070 1.0 0.3 56.0 TA T520T566M2R5A(1)E070 14 17 88 7070 1.0 0.3 68.0 T520A686M2R5A(1)E070 1.0 0.3 68.0 AA T520A686M2R5A(1)E070 17 17 88 7080 1.0 0.3 68.0 T520A686M2R5A(1)E080 1.0 0.3 68.0 AT T520A686M2R5A(1)E080 17 25 88 8070 1.0 0.3 100.0 T520T107M2R5A(1)E070 1.0 0.3 100.0 TB T520T107M2R5A(1)E070 25 25 88 7035 1.0 0.3 100.0 T520B107M2R5A(1)E035 1.6 0.5 100.0 BB T520B107M2R5A(1)E025 25 25 88 2540 1.8 0.6 100.0 T520B107M2R5A(1)E040 1.5 0.5 100.0 T520B107M2R5A(1)E070 1.1 0.3 100.0 BB T520B107M2R5A(1)E035 25 25 88 3570 1.6 0.5 150.0 T520U157M2R5A(1)E055 1.3 0.4 100.0 BU T520B107M2R5A(1)E040 25 38 88 4055 1.5 0.5 220.0 T520B227M2R5A(1)E025 1.8 0.6 100.0 BB T520B107M2R5A(1)E070 25 55 88 7025 1.1 0.3 220.0 B T520B227M2R5A(1)E030 55 8 30 1.7 0.5 150.0 U T520U157M2R5A(1)E055 38 8 55 1.3 0.4 220.0 T520B227M2R5A(1)E035 1.6 0.5 220.0 BB T520B227M2R5A(1)E025 55 55 88 2535 1.8 0.6 220.0 T520B227M2R5A(1)E070 1.1 0.3 220.0 BB T520B227M2R5A(1)E030 55 55 88 3070 1.7 0.5 220.0 T520C227M2R5A(1)E025 2.1 0.7 220.0 BC T520B227M2R5A(1)E035 55 55 88 3525 1.6 0.5 220.0 T520C227M2R5A(1)E045 1.6 0.5 220.0 BC T520B227M2R5A(1)E070 55 55 88 7045 1.1 0.3 220.0 V T520V227M2R5A(1)E007 55 10 7 4.2 1.3 220.0 C T520C227M2R5A(1)E025 55 8 25 2.1 0.7 220.0 V T520V227M2R5A(1)E009 55 10 9 3.7 1.2 220.0 C T520C227M2R5A(1)E045 55 8 45 1.6 0.5 220.0 V T520V227M2R5A(1)E012 55 10 12 3.2 1.0 220.0 V T520V227M2R5A(1)E007 55 10 7 4.2 1.3 220.0 V T520V227M2R5A(1)E015 55 10 15 2.9 0.9 220.0 V T520V227M2R5A(1)E009 55 10 9 3.7 1.2 220.0 V T520V227M2R5A(1)E025 55 10 25 2.2 0.7 220.0 V T520V227M2R5A(1)E012 55 10 12 3.2 1.0 220.0 V T520V227M2R5A(1)E045 55 10 45 1.7 0.5 220.0 V T520V227M2R5A(1)E015 55 10 15 2.9 0.9 220.0 D T520D227M2R5A(1)E007 55 10 7 4.6 1.5 220.0 VD T520V227M2R5A(1)E025 55 55 10 10 2540 2.2 0.7 220.0 T520D227M2R5A(1)E040 1.9 0.6 220.0 VB T520V227M2R5A(1)E045 55 83 10 8 4545 1.7 0.5 330.0 T520B337M2R5A(1)E045 1.4 0.4 220.0 DB T520D227M2R5A(1)E007 55 83 10 8 7 70 4.6 1.5 330.0 T520B337M2R5A(1)E070 1.1 0.3 220.0 DC T520D227M2R5A(1)E040 55 83 10 8 4015 1.9 0.6 330.0 T520C337M2R5A(1)E015 2.7 0.8 330.0 BC T520B337M2R5A(1)E045 83 83 88 4518 1.4 0.4 330.0 T520C337M2R5A(1)E018 2.4 0.8 330.0 BC T520B337M2R5A(1)E070 83 83 88 7025 1.1 0.3 330.0 T520C337M2R5A(1)E025 2.1 0.7 330.0 CC T520C337M2R5A(1)E015 83 83 88 1545 2.7 0.8 330.0 T520C337M2R5A(1)E045 1.6 0.5 330.0 CW T520C337M2R5A(1)E018 83 83 8 10 1840 2.4 0.8 330.0 T520W337M2R5A(1)E040 1.7 0.5 330.0 CV T520C337M2R5A(1)E025 83 83 8 10 25 6 2.1 0.7 330.0 T520V337M2R5A(1)E006 4.6 1.4 330.0 T520V337M2R5A(1)E007 4.2 1.3 330.0 CV T520C337M2R5A(1)E045 83 83 8 10 45 7 1.6 0.5 330.0 T520V337M2R5A(1)E009 3.7 1.2 330.0 WV T520W337M2R5A(1)E040 83 83 10 10 40 9 1.7 0.5 330.0 T520V337M2R5A(1)E012 3.2 1.0 330.0 VV T520V337M2R5A(1)E006 83 83 10 10 6 12 4.6 1.4 330.0 T520V337M2R5A(1)E015 2.9 0.9 330.0 VV T520V337M2R5A(1)E007 83 83 10 10 7 15 4.2 1.3 330.0 T520V337M2R5A(1)E018 2.6 0.8 330.0 VV T520V337M2R5A(1)E009 83 83 10 10 9 18 3.7 1.2 330.0 T520V337M2R5A(1)E025 2.2 0.7 330.0 VV T520V337M2R5A(1)E012 83 83 10 10 1225 3.2 1.0 330.0 V T520V337M2R5A(1)E040 83 10 40 1.8 0.6 330.0 V T520V337M2R5A(1)E015 83 10 15 2.9 0.9 330.0 T520D337M2R5A(1)E006 5.0 1.7 330.0 VD T520V337M2R5A(1)E018 83 83 10 10 18 6 2.6 0.8 330.0 T520D337M2R5A(1)E007 4.6 1.5 330.0 VD T520V337M2R5A(1)E025 83 83 10 10 25 7 2.2 0.7 470.0 V T520V477M2R5A(1)E007 118 10 7 4.2 1.3 330.0 V T520V337M2R5A(1)E040 83 10 40 1.8 0.6 470.0 V T520V477M2R5A(1)E009 118 10 9 3.7 1.2 330.0 D T520D337M2R5A(1)E006 83 10 6 5.0 1.7 470.0 V T520V477M2R5A(1)E012 118 10 12 3.2 1.0 330.0 D T520D337M2R5A(1)E007 83 10 7 4.6 1.5 470.0 V T520V477M2R5A(1)E015 118 10 15 2.9 0.9 470.0 V T520V477M2R5A(1)E007 118 10 7 4.2 1.3 470.0 V T520V477M2R5A(1)E018 118 10 18 2.6 0.8 470.0 V T520V477M2R5A(1)E009 118 10 9 3.7 1.2 470.0 C T520C477M2R5A(1)E025 118 8 25 2.0 0.6 470.0 VC T520V477M2R5A(1)E012 118 10 8 1245 3.2 1.0 470.0 T520C477M2R5A(1)E045 118 1.5 0.5 470.0 VD T520V477M2R5A(1)E015 118 10 10 15 6 2.9 0.9 470.0 T520D477M2R5A(1)E006 118 5.0 1.7 470.0 VD T520V477M2R5A(1)E018 118 10 10 18 7 2.6 0.8 470.0 T520D477M2R5A(1)E007 118 4.6 1.5 470.0 CD T520C477M2R5A(1)E025 118 8 10 25 9 2.0 0.6 470.0 T520D477M2R5A(1)E009 118 4.1 1.3 470.0 CD T520C477M2R5A(1)E045 118 8 10 4510 1.5 0.5 680.0 T520D687M2R5A(1)E010 170 3.9 1.2 470.0 DD T520D477M2R5A(1)E006 118 10 10 6 15 5.0 1.7 680.0 T520D687M2R5A(1)E015 170 3.2 1.0 470.0 DD T520D477M2R5A(1)E007 118 10 10 7 40 4.6 1.5 680.0 T520D687M2R5A(1)E040 170 1.9 0.6 470.0 DY T520D477M2R5A(1)E009 118 10 10 9 15 4.1 1.3 680.0 T520Y687M2R5A(1)E015 170 3.3 1.0 680.0 DY T520D687M2R5A(1)E010 170 10 10 1025 3.9 1.2 680.0 T520Y687M2R5A(1)E025 170 2.5 0.8 680.0 DD T520D687M2R5A(1)E015 170 10 8 1515 3.2 1.0 1000.0 T520D108M2R5A(1)E015 250 3.2 1.1 1000.0 T520D108M2R5A(1)E030 250 2.2 0.7 680.0 DD T520D687M2R5A(1)E040 170 10 10 4030 1.9 0.6 1000.0 T520Y108M2R5A(1)E010 250 4.0 1.3 680.0 YY T520Y687M2R5A(1)E015 170 10 10 1510 3.3 1.0 1000.0 Y T520Y108M2R5A(1)E015 250 10 15 3.3 1.0 680.0 Y T520Y687M2R5A(1)E025 170 10 25 2.5 0.8 1000.0 T520Y108M2R5A(1)E025 250 2.5 0.8 1000.0 DY T520D108M2R5A(1)E015 250 8 10 1525 3.2 1.1 1000.0 T520X108M2R5A(1)E010 250 4.1 1.3 1000.0 DX T520D108M2R5A(1)E030 250 10 10 3010 2.2 0.7 1000.0 Y T520Y108M2R5A(1)E010 3 Volt Rating @ 105°C 10 250 10 4.0 1.3 100.0 T520B107M003A(1)E035 1.6 0.5 1000.0 YB T520Y108M2R5A(1)E015 25030 10 8 1535 3.3 1.0 100.0 T520B107M003A(1)E040 1.5 0.5 1000.0 YB T520Y108M2R5A(1)E025 25030 10 8 2540 2.5 0.8 100.0 T520B107M003A(1)E070 1.1 0.3 1000.0 XB T520X108M2R5A(1)E010 25030 10 8 1070 4.1 1.3 150.0 B T520B157M003A(1)E035 Volt Rating 45 105°C 8 35 1.6 0.5 3 @ 150.0 B T520B157M003A(1)E040 45 8 40 1.5 0.5 100.0 B T520B107M003A(1)E025 30 8 25 1.8 0.6 150.0 B T520B157M003A(1)E070 45 8 70 1.1 0.3 100.0 B T520B107M003A(1)E035 30 8 35 1.6 0.5 330.0 V T520V337M003A(1)E009 99 10 9 3.7 1.2 100.0 B T520B107M003A(1)E040 30 8 40 1.5 0.5 330.0 V T520V337M003A(1)E012 99 10 12 3.2 1.0 100.0 BV T520B107M003A(1)E070 30 99 8 10 7015 1.1 0.3 330.0 T520V337M003A(1)E015 2.9 0.9 150.0 BV T520B157M003A(1)E035 45 99 8 10 3525 1.6 0.5 330.0 T520V337M003A(1)E025 2.2 0.7 150.0 BD T520B157M003A(1)E040 45204 8 10 4015 1.5 0.5 680.0 T520D687M003A(1)E015 3.2 1.0 150.0 BD T520B157M003A(1)E070 45204 8 10 7040 1.1 0.3 680.0 T520D687M003A(1)E040 1.9 0.6 330.0 VX T520V337M003A(1)E009 99300 10 10 9 15 3.7 1.2 1000.0 T520X108M003A(1)E015 3.3 1.0 330.0 VX T520V337M003A(1)E012 99300 10 10 1230 3.2 1.0 1000.0 T520X108M003A(1)E030 2.3 0.7 330.0 V T520V337M003A(1)E015 4 Volt Rating @ 105°C 10 99 15 2.9 0.9 330.0 VT T520V337M003A(1)E025 99 6 10 8 25 2.2 0.7 15.0 T520T156M004A(1)E100 100 0.8 0.3 680.0 DA T520D687M003A(1)E015 20413 10 8 1570 3.2 1.0 33.0 T520A336M004A(1)E070 1.0 0.3 680.0 DA T520D687M003A(1)E040 20413 10 8 4080 1.9 0.6 33.0 T520A336M004A(1)E080 1.0 0.3 47.0 T520A476M004A(1)E070 1.0 0.3 1000.0 XA T520X108M003A(1)E015 30019 10 8 1570 3.3 1.0 47.0 T520A476M004A(1)E080 1.0 0.3 1000.0 XA T520X108M003A(1)E030 30019 10 8 3080 2.3 0.7 47.0 T T520T476M004A(1)E070 Volt Rating 19 105°C 8 70 1.0 0.3 4 @ 68.0 T520T686M004A(1)E070 70 1.0 0.3 15.0 TT T520T156M004A(1)E100 6 27 88 100 0.8 0.3 68.0 T520B686M004A(1)E035 1.6 0.5 33.0 AB T520A336M004A(1)E070 13 27 88 7035 1.0 0.3 68.0 T520B686M004A(1)E040 1.5 0.5 33.0 AB T520A336M004A(1)E080 13 27 88 8040 1.0 0.3 68.0 T520B686M004A(1)E070 1.1 0.3 47.0 AB T520A476M004A(1)E070 19 27 88 7070 1.0 0.3 68.0 T520U686M004A(1)E055 1.3 0.4 47.0 AU T520A476M004A(1)E080 19 27 88 8055 1.0 0.3 100.0 B T520B107M004A(1)E035 40 8 35 1.6 0.5 47.0 T T520T476M004A(1)E070 19 8 70 1.0 0.3 100.0 B T520B107M004A(1)E040 40 8 40 1.5 0.5 68.0 T T520T686M004A(1)E070 27 8 70 1.0 0.3 100.0 B T520B107M004A(1)E070 40 8 70 1.1 0.3 68.0 B T520B686M004A(1)E035 27 8 35 1.6 0.5 100.0 U T520U107M004A(1)E055 40 8 55 1.3 0.4 68.0 B T520B686M004A(1)E040 27 8 40 1.5 0.5 150.0 B T520B157M004A(1)E025 60 8 25 1.8 0.6 68.0 B T520B686M004A(1)E070 27 8 70 1.1 0.3 150.0 B T520B157M004A(1)E030 60 8 30 1.7 0.5 68.0 UB T520U686M004A(1)E055 27 60 88 5535 1.3 0.4 150.0 T520B157M004A(1)E035 1.6 0.5 100.0 BB T520B107M004A(1)E025 40 60 88 2540 1.8 0.6 150.0 T520B157M004A(1)E040 1.5 0.5 100.0 BB T520B107M004A(1)E035 40 60 88 3570 1.6 0.5 150.0 T520B157M004A(1)E070 1.1 0.3 100.0 BU T520B107M004A(1)E040 40 60 88 4055 1.5 0.5 150.0 T520U157M004A(1)E055 1.3 0.4 100.0 BC T520B107M004A(1)E070 40 60 88 7015 1.1 0.3 150.0 T520C157M004A(1)E015 2.7 0.9 100.0 UC T520U107M004A(1)E055 40 60 88 5525 1.3 0.4 150.0 T520C157M004A(1)E025 2.1 0.7 C T520C157M004A(1)E045 60 8 1.6 (1) To150.0 complete KEMET part number, insert letter designation for lead material from 45 page 50. Higher voltage0.5 470.0 470.0 V V ratings and tighter tolerance product may be susbstituted with the same size as KEMET’s option. Voltage substitutions will be marked with the higher voltage rating. product may be substituted within the same size at KEMET’S option. Voltage substitutions will be marked with the higher voltage rating. ©KEMET ElectronicsT520V477M002 Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 51 Conductive Polmer Surface Mount CONDUCTIVE POLYMER CHIP CAPACITORS T520 Series - KO Cap T520 RATINGS & PART NUMBER REFERENCE Capacitance µF Case Size KEMET Part Number DC Leakage µA @ 25°C Max DF% @ 25°C 120 Hz Max ESR mΩ @ 25°C 100 kHz Max Ripple Current Arms @ 100 kHz Max w/Δ T=20°C @ -55°C to 85°C w/Δ T= 2°C @ 105°C 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 470.0 470.0 470.0 470.0 470.0 470.0 680.0 680.0 680.0 680.0 680.0 680.0 680.0 680.0 680.0 15.0 22.0 22.0 33.0 33.0 33.0 33.0 33.0 33.0 47.0 47.0 47.0 47.0 47.0 68.0 68.0 68.0 68.0 68.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 120.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 150.0 220.0 220.0 220.0 220.0 B B B U C C C C V V V V V D B B B C C C C C W V V V V V V V V D D D D C V V V V V V D D D D D D D D D D D D D D D D Y Y Y X X X T A A A A T B B B T T B B B B B B B U B B B U W V V V V V C C D B B B B C C W V V V V V V V D D D D D C C C C 4 Volt Rating @ 105°C cont. T520B157M004A(1)E035 60 8 T520B157M004A(1)E040 60 8 T520B157M004A(1)E070 60 8 T520U157M004A(1)E055 60 8 T520C157M004A(1)E015 60 8 T520C157M004A(1)E025 60 8 T520C157M004A(1)E045 60 8 60 8 T520C157M004A(1)E100 T520V157M004A(1)E007 60 10 T520V157M004A(1)E009 60 10 T520V157M004A(1)E012 60 10 T520V157M004A(1)E015 60 10 T520V157M004A(1)E025 60 10 60 10 T520D157M004A(1)E007 T520B227M004A(1)E035 88 8 88 8 T520B227M004A(1)E045 88 8 T520B227M004A(1)E070 88 8 T520C227M004A(1)E015 88 8 T520C227M004A(1)E018 88 8 T520C227M004A(1)E025 88 8 T520C227M004A(1)E045 88 8 T520C227M004A(1)E055 88 10 T520W227M004A(1)E040 T520V227M004A(1)E007 88 10 T520V227M004A(1)E009 88 10 T520V227M004A(1)E012 88 10 T520V227M004A(1)E015 88 10 T520V227M004A(1)E018 88 10 T520V227M004A(1)E025 88 10 T520V227M004A(1)E040 88 10 T520V227M004A(1)E045 88 10 88 10 T520D227M004A(1)E006 88 10 T520D227M004A(1)E007 88 10 T520D227M004A(1)E012 T520D227M004A(1)E065 88 10 132 8 T520C337M004A(1)E025 T520V337M004A(1)E007 132 10 T520V337M004A(1)E009 132 10 T520V337M004A(1)E012 132 10 T520V337M004A(1)E018 132 10 T520V337M004A(1)E025 132 10 T520V337M004A(1)E040 132 10 132 10 T520D337M004A(1)E006 132 10 T520D337M004A(1)E007 132 10 T520D337M004A(1)E009 132 10 T520D337M004A(1)E012 132 10 T520D337M004A(1)E015 132 10 T520D337M004A(1)E040 132 8 T520D337M004A(1)E045 188 10 T520D477M004A(1)E010 188 10 T520D477M004A(1)E012 188 10 T520D477M004A(1)E015 188 10 T520D477M004A(1)E018 188 10 T520D477M004A(1)E025 188 10 T520D477M004A(1)E040 272 10 T520D687M004A(1)E012 272 10 T520D687M004A(1)E015 272 10 T520D687M004A(1)E025 T520Y687M004A(1)E010 272 10 T520Y687M004A(1)E015 272 10 T520Y687M004A(1)E025 272 10 T520X687M004A(1)E010 272 10 T520X687M004A(1)E015 272 10 T520X687M004A(1)E035 272 10 6.3 Volt Rating @ 105°C 9.5 8 T520T156M006A(1)E100 T520A226M006A(1)E090 14 8 T520A226M006A(1)E100 14 8 T520A336M006A(1)E070 21 8 T520A336M006A(1)E080 21 8 21 8 T520T336M006A(1)E070 21 8 T520B336M006A(1)E035 21 8 T520B336M006A(1)E040 21 8 T520B336M006A(1)E070 30 8 T520T476M006A(1)E040 30 8 T520T476M006A(1)E070 30 8 T520B476M006A(1)E035 30 8 T520B476M006A(1)E040 30 8 T520B476M006A(1)E070 43 8 T520B686M006A(1)E025 43 8 T520B686M006A(1)E035 43 8 T520B686M006A(1)E040 43 8 T520B686M006A(1)E070 43 8 T520U686M006A(1)E055 T520B107M006A(1)E040 63 8 63 8 T520B107M006A(1)E045 63 8 T520B107M006A(1)E070 T520U107M006A(1)E055 63 8 63 10 T520W107M006A(1)E040 T520V107M006A(1)E007 63 10 T520V107M006A(1)E009 63 10 T520V107M006A(1)E012 63 10 T520V107M006A(1)E015 63 10 T520V107M006A(1)E045 63 10 63 8 T520C107M006A(1)E025 63 8 T520C107M006A(1)E045 T520D107M006A(1)E007 63 10 76 8 T520B127M006A(1)E035 95 8 T520B157M006A(1)E035 95 8 T520B157M006A(1)E045 95 8 T520B157M006A(1)E070 T520C157M006A(1)E025 95 8 95 8 T520C157M006A(1)E045 95 10 T520W157M006A(1)E040 T520V157M006A(1)E007 95 10 T520V157M006A(1)E009 95 10 T520V157M006A(1)E012 95 10 T520V157M006A(1)E015 95 10 T520V157M006A(1)E025 95 10 T520V157M006A(1)E040 95 10 T520V157M006A(1)E045 95 10 95 10 T520D157M006A(1)E006 95 10 T520D157M006A(1)E007 95 10 T520D157M006A(1)E015 95 10 T520D157M006A(1)E025 95 10 T520D157M006A(1)E055 139 8 T520C227M006A(1)E015 T520C227M006A(1)E018 139 8 139 8 T520C227M006A(1)E025 139 8 T520C227M006A(1)E045 35 40 70 55 15 25 45 100 7 9 12 15 25 7 35 45 70 15 18 25 45 55 40 7 9 12 15 18 25 40 45 6 7 12 65 25 7 9 12 18 25 40 6 7 9 12 15 40 45 10 12 15 18 25 40 12 15 25 10 15 25 10 15 35 100 90 100 70 80 70 35 40 70 40 70 35 40 70 25 35 40 70 55 40 45 70 55 40 7 9 12 15 45 25 45 7 35 35 45 70 25 45 40 7 9 12 15 25 40 45 6 7 15 25 55 15 18 25 45 1.6 1.5 1.1 1.3 2.7 2.1 1.6 1.0 4.2 3.7 3.2 2.9 2.2 4.6 1.6 1.4 1.1 2.7 2.5 2.1 1.6 1.4 1.7 4.2 3.7 3.2 2.9 2.6 2.2 1.8 1.7 5.0 4.6 3.5 1.5 2.0 4.2 3.7 3.2 2.6 2.2 1.8 5.0 4.6 4.1 3.5 3.2 1.9 1.5 3.9 3.5 3.2 2.9 2.4 1.9 3.5 3.2 2.4 4.0 3.3 2.5 4.1 3.3 2.2 0.8 0.9 0.9 1.0 1.0 0.9 1.5 1.5 1.1 1.3 1.0 1.6 1.5 1.1 1.8 2.4 1.5 1.1 1.3 1.5 1.4 1.1 1.3 1.7 4.2 3.7 3.2 2.9 1.7 2.1 1.6 4.6 1.5 1.6 1.4 1.1 2.1 1.6 1.7 4.2 3.7 3.2 2.9 2.2 1.8 1.7 5.0 4.6 3.2 2.4 1.7 2.7 2.5 2.0 1.5 0.5 0.5 0.3 0.4 0.9 0.7 0.5 0.3 1.3 1.2 1.0 0.9 0.7 1.5 0.5 0.4 0.3 0.9 0.8 0.7 0.5 0.4 0.5 1.3 1.2 1.0 0.9 0.8 0.7 0.6 0.5 1.7 1.5 1.1 0.5 0.6 1.3 1.2 1.0 0.8 0.7 0.6 1.7 1.5 1.3 1.1 1.0 0.6 0.5 1.2 1.1 1.0 0.9 0.8 0.6 1.2 1.1 0.8 1.3 1.0 0.8 1.3 1.0 0.7 0.3 0.3 0.3 0.3 0.3 0.4 0.5 0.5 0.3 0.4 0.3 0.5 0.5 0.3 0.6 0.5 0.5 0.3 0.4 0.5 0.4 0.3 0.4 0.5 1.3 1.2 1.0 0.9 0.5 0.7 0.5 1.5 0.5 0.5 0.4 0.3 0.7 0.5 0.5 1.3 1.2 1.0 0.9 0.7 0.6 0.5 1.7 1.5 1.0 0.8 0.5 0.9 0.8 0.6 0.5 product may be substituted wandin the same size at KEMET’Ssusbstitutedoltage substisizeonsKEMET’s marked with the higher voltage rating. ratings ith tighter tolerance product may be option. V with the same tuti as will be option. Voltage substitutions will be marked with the higher voltage rating. (1) To complete KEMET part number, insert letter designation for lead material from page 50. Higher voltage ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 2 Volt Rating @ 105°C Conductive Polymer Surface Mount CONDUCTIVE POLYMER CHIP CAPACITORS T520 Series - KO Cap T520 RATINGS & PART NUMBER REFERENCE Capacitance µF Case Size KEMET Part Number DC Leakage µA @ 25°C Max DF% @ 25°C 120 Hz Max ESR mΩ @ 25°C 100 kHz Max 7 9 12 15 25 40 6 7 9 15 40 50 15 18 25 40 45 9 10 15 18 25 40 45 15 25 40 10 15 18 25 35 25 30 10 18 35 40 70 80 35 40 70 70 35 70 66 66 25 40 55 40 80 80 80 70 80 35 40 70 70 35 70 55 25 40 45 25 40 45 60 100 100 25 45 40 18 25 45 50 18 55 80 25 40 55 40 18 25 40 15 35 10 25 40 60 45 60 70 45 45 70 35 70 50 40 40 45 90 60 80 Ripple Current Arms @ 100 kHz Max w/Δ T=20°C @ -55°C to 85°C w/Δ T= 2°C @ 105°C 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 220.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 330.0 470.0 470.0 470.0 470.0 470.0 470.0 470.0 470.0 470.0 470.0 470.0 33.0 33.0 33.0 33.0 33.0 33.0 47.0 47.0 82.0 82.0 150.0 150.0 150.0 150.0 10.0 15.0 22.0 33.0 33.0 33.0 33.0 33.0 33.0 47.0 47.0 47.0 68.0 68.0 68.0 68.0 68.0 68.0 68.0 68.0 68.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 150.0 150.0 150.0 220.0 220.0 220.0 220.0 330.0 330.0 330.0 330.0 330.0 33.0 33.0 33.0 33.0 47.0 47.0 47.0 47.0 47.0 68.0 150.0 22.0 22.0 22.0 15.0 15.0 V V V V V V D D D D D D V V V V V D D D D D D D Y Y Y Y Y Y Y Y D D X X X X T T B B B U B B C C D D D V A A A T T B B B U B B U W W C V V V V V D C C W V V V V D D D D D D Y D D D Y Y X X X W V V V W V V D D D X V V V D D 6.3 Volt Rating @ 105°C cont. T520V227M006A(1)E007 139 10 T520V227M006A(1)E009 139 10 T520V227M006A(1)E012 139 10 T520V227M006A(1)E015 139 10 T520V227M006A(1)E025 139 10 T520V227M006A(1)E040 139 10 T520D227M006A(1)E006 139 10 T520D227M006A(1)E007 139 10 139 10 T520D227M006A(1)E009 139 10 T520D227M006A(1)E015 139 10 T520D227M006A(1)E040 T520D227M006A(1)E050 139 10 6.3 Volt Rating @ 105°C T520V337M006A(1)E015 208 10 T520V337M006A(1)E018 208 10 T520V337M006A(1)E025 208 10 T520V337M006A(1)E040 208 10 T520V337M006A(1)E045 208 10 208 10 T520D337M006A(1)E009 T520D337M006A(1)E010 208 10 208 10 T520D337M006A(1)E015 208 10 T520D337M006A(1)E018 208 10 T520D337M006A(1)E025 208 10 T520D337M006A(1)E040 208 10 T520D337M006A(1)E045 T520Y337M006A(1)E015 208 10 T520Y337M006A(1)E025 208 10 T520Y337M006A(1)E040 208 10 T520Y477M006A(1)E010 296 10 T520Y477M006A(1)E015 296 10 T520Y477M006A(1)E018 296 10 T520Y477M006A(1)E025 296 10 T520Y477M006A(1)E035 296 10 296 10 T520D477M006A(1)E025 296 10 T520D477M006A(1)E030 T520X477M006A(1)E010 296 10 T520X477M006A(1)E018 296 10 T520X477M006A(1)E035 296 10 T520X477M006A(1)E040 296 10 8 Volt Rating @ 105°C 26 8 T520T336M008A(1)E070 26 8 T520T336M008A(1)E080 26 15 T520B336M008A(1)E035 26 8 T520B336M008A(1)E040 26 8 T520B336M008A(1)E070 26 8 T520U336M008A(1)E070 38 8 T520B476M008A(1)E035 38 8 T520B476M008A(1)E070 82 8 T520C826M008A(1)E025 82 8 T520C826M008A(1)E045 120 10 T520D157M008A(1)E025 120 10 T520D157M008A(1)E040 120 10 T520D157M008A(1)E055 T520V157M008A(1)E040 120 10 10 Volt Rating @ 105°C T520A106M010A(1)E080 10 8 T520A156M010A(1)E080 15 8 T520A226M010A(1)E080 22 8 33 8 T520T336M010A(1)E070 33 8 T520T336M010A(1)E080 33 8 T520B336M010A(1)E035 33 8 T520B336M010A(1)E040 33 8 T520B336M010A(1)E070 33 8 T520U336M010A(1)E070 47 8 T520B476M010A(1)E035 47 8 T520B476M010A(1)E070 47 8 T520U476M010A(1)E055 68 10 T520W686M010A(1)E025 68 10 T520W686M010A(1)E040 68 8 T520C686M010A(1)E045 T520V686M010A(1)E025 68 10 T520V686M010A(1)E040 68 10 T520V686M010A(1)E045 68 10 T520V686M010A(1)E060 68 10 T520V686M010A(1)E100 68 10 68 10 T520D686M010A(1)E100 100 8 T520C107M010A(1)E025 100 8 T520C107M010A(1)E045 100 10 T520W107M010A(1)E040 T520V107M010A(1)E018 100 10 T520V107M010A(1)E025 100 10 T520V107M010A(1)E045 100 10 T520V107M010A(1)E050 100 10 100 10 T520D107M010A(1)E018 100 10 T520D107M010A(1)E055 T520D107M010A(1)E080 100 10 150 10 T520D157M010A(1)E025 150 10 T520D157M010A(1)E040 150 10 T520D157M010A(1)E055 T520Y227M010A(1)E040 220 10 220 10 T520D227M010A(1)E018 220 10 T520D227M010A(1)E025 220 10 T520D227M010A(1)E040 T520Y337M010A(1)E015 330 10 T520Y337M010A(1)E035 330 10 T520X337M010A(1)E010 330 10 T520X337M010A(1)E025 330 10 T520X337M010A(1)E040 330 10 16 Volt Rating @ 105°C T520W336M016A(1)E045 53 10 T520V336M016A(1)E045 53 10 T520V336M016A(1)E060 53 10 T520V336M016A(1)E070 53 10 T520W476M016A(1)E045 75 10 T520V476M016A(1)E045 75 10 T520V476M016A(1)E070 76 10 75 10 T520D476M016A(1)E035 T520D476M016A(1)E070 75 10 109 10 T520D686M016A(1)E050 T520X157M016A(1)E040 240 10 20 Volt Rating @ 105°C T520V226M020A(1)E040 44 10 T520V226M020A(1)E045 44 10 T520V226M020A(1)E090 44 10 25 Volt Rating @ 105°C T520D156M025A(1)E060 38 10 38 10 T520D156M025A(1)E080 4.2 3.7 3.2 2.9 2.2 1.8 5.0 4.6 4.1 3.2 1.9 1.7 2.8 2.6 2.2 1.8 1.7 4.1 3.9 3.2 2.9 2.4 1.9 1.8 3.3 2.5 2.0 4.0 3.3 3.0 2.5 2.1 2.4 2.2 4.1 3.0 2.2 2.0 1.0 0.9 1.5 1.5 1.1 1.1 1.6 1.1 2.1 1.5 2.4 1.9 1.7 3.1 1.0 1.0 0.9 1.0 0.9 1.5 1.5 1.1 1.1 1.6 1.1 1.2 2.2 1.7 1.6 2.2 1.8 1.7 1.4 1.1 1.2 2.1 1.5 1.7 2.6 2.2 1.7 1.6 2.9 1.7 1.4 2.4 1.9 1.7 2.0 2.9 2.4 1.9 3.3 2.1 4.1 2.6 2.0 1.6 1.7 1.4 1.9 1.6 1.7 1.3 2.1 1.5 1.7 2.6 1.8 1.6 1.2 1.6 1.4 1.3 1.2 1.0 0.9 0.7 0.6 1.7 1.5 1.3 1.0 0.6 0.5 0.9 0.8 0.7 0.6 0.5 1.4 1.2 1.1 0.9 0.8 0.6 0.6 1.0 0.8 0.6 1.3 1.0 0.9 0.8 0.7 0.8 0.7 1.3 1.0 0.7 0.6 0.3 0.3 0.5 0.5 0.3 0.4 0.5 0.3 0.6 0.2 0.8 0.6 0.5 1.0 0.3 0.3 0.3 0.3 0.3 0.5 0.5 0.3 0.4 0.5 0.3 0.4 0.7 0.5 0.5 0.7 0.6 0.5 0.5 0.4 0.4 0.4 0.5 0.5 0.8 0.7 0.5 0.5 0.9 0.5 0.4 0.8 0.6 0.5 0.6 0.9 0.8 0.6 1.0 0.4 1.3 0.8 0.6 0.5 0.5 0.5 0.4 0.5 0.5 0.4 0.7 0.5 0.5 0.8 0.6 0.2 0.4 0.5 0.4 (1) To complete KEMET part number, insert letter designation for lead material from page 50. Higher voltage ratings and tighter tolerance product may be susbstituted with the same size as KEMET’s option. Voltage substitutions will be marked with the higher voltage rating. product may be substituted within the same size at KEMET’S option. Voltage substitutions will be marked with the higher voltage rating. ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Conductive Polmer Surface Mount TANTALUM AND ALUMINUM CHIP CAPACITORS Packaging Information Tape & Reel Packaging KEMET’s Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-1: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems. Right Hand Orientation Only Embossed Carrier (+) (–) Embossment Top Tape Thickness .10mm (.004") Max Thickness 8mm ±.30 8mm (0.315") (.315 ±.012") or or 12mm (0.472") 12mm ±.30 (.472 ±.012") 178mm (7.00") 180mm (7.0") oror 330mm (13.00") 330mm (13.0") Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. QUANTITIES PACKAGED PER REEL Case Code KEMET EIA R 2012-12 S 3216-12 T 3528-12 U 6032-15 W 7343-15 V 7343-20 A 3216-18 B 3528-21 C 6032-28 D 7343-31 Y 7343-40 X 7343-43 E 7260-38 Tape Width-mm 8 8 8 12 12 12 8 8 12 12 12 12 12 7" Reel* 2,500 2,500 2,500 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 13" Reel* 10,000 10,000 10,000 5,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000 * No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging. * Standard reel packaging is not mandatory. * Bulk packaging also available using C-7610. 92 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Packaging TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg Minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 Newton to 1.0 Newton (10g to 100g) 12 mm 0.1 Newton to 1.3 Newton (10g to 130g) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Reel Sizes: Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13") reels (with C-7280). Note that 13” reels are preferred. 4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. Embossed Carrier Tape Configuration: Figure 1 Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern) Constant Dimensions — Millimeters (Inches) Tape Size 8 mm and 12 mm D0 E P0 4.0 ±0.10 (0.157 ±0.004) P2 2.0 ±0.05 (0.079 ±0.002) T Max 0.600 (0.024) T1 Max 0.100 (0.004) 1.5 1.75 ±0.10 +0.10 -0.0 (0.059 (0.069 ±0.004) +0.004, -0.0) Pitch Single (4 mm) B1 Max. Note 1 4.4 (0.173) 12 mm Double (8 mm) 8.2 (0.323) D1 Min. Note 2 1.0 Variable Dimensions — Millimeters (Inches) Tape Size 8 mm F 3.5 ±0.05 P1 4.0 ±0.10 R Min. Note 3 25.0 T2 Max 2.5 (0.098) W 8.0 ±0.30 (.315 ±0.012) A0B0K0 Note 4 (0.039) (0.138 ±0.002) 1.5 5.5 ±0.05 (0.059) (0.217 ±0.002) (0.157 ±0.004) (0.984) 8.0 ±0.10 30.0 (0.315 ±0.004) (1.181) 4.6 12.0 ±0.30 (0.181) (0.472 ±0.012) NOTES 1. B1 dimension is a reference dimension for tape feeder clearance only. 2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2) 4. The cavity defined by A0, B0, and K0 shall be configured to surround the part with sufficient clearance such that the chip does not protrude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm maximum in the pocket (not applicable to vertical clearance.) 94 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS Packaging Information Embossed Carrier Tape Configuration (cont.) 20° Sketch D: Tape Camber (Top View) 1mm (0.039) Max. 250mm (9.843) Allowable camber to be 1 mm/250 mm. 1mm (0.039) Max. 400mm (15.75) Min. Figure 2: Tape Leader & Trailer Dimensions (Metric Dimensions Will Govern) Figure 3: Reel Dimensions (Metric Dimensions will govern) Table 2 – REEL DIMENSIONS (Metric will govern) Tape Size 8 mm A Max 330.0 (12.992) B* Min 1.5 (0.059) C 13.0 ± 0.20 (0.512 ± 0.008) D* Min 20.2 (0.795) N Min 50.0 (1.969) See Note 3 Table 1 W1 8.4 +1.5, -0.0 (0.331 +0.059, -0.0) 12.4 +2.0, -0.0 (0.488 +0.078, -0.0) W2 Max 14.4 (0.567) W3 7.9 Min (0.311) 10.9 Max (0.429) 11.9 Min (0.469) 15.4 Max (0.606) 12 mm 330.0 (12.992) 1.5 (0.059) 13.0 ± 0.20 (0.512 ± 0.008) 20.2 (0.795) 18.4 (0.724) ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 95 Packaging