0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
T528Z157M006ATE009

T528Z157M006ATE009

  • 厂商:

    KEMET(基美)

  • 封装:

    Z7343-17

  • 描述:

    钽聚合物电容器 Z7343-17 150µF ±20% 6.3V 7.30 x 4.30mm 9mΩ

  • 数据手册
  • 价格&库存
T528Z157M006ATE009 数据手册
KEMET Organic Capacitor (KO-CAP®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low ESR and improved capacitance retention at high frequencies. KO-CAP combines the low ESR of multilayer ceramic, the high capacitance of aluminum electrolytic, and the volumetric efficiency of tantalum into a single surface mount package. Unlike liquid electrolyte-based capacitors, KO-CAP has a very long operational life and high ripple current capabilities. The T528 low ESL Facedown Terminal Polymer Electrolytic combines ultra-low ESR and high capacitance in a package design that offers the lowest ESL in the market. This series offers exceptional performance for high-speed microprocessor, FPGA, or ASIC decoupling designs. The T528 utilizes a unique termination design that allows for a reduction in the inductance loop area and comes in a low profile 1.7 mm case height. This series offers improved capacitance retention at frequencies of up to 1 MHz. Benefits • Low ESL < 0.7 nH at 20 MHz • Improved volumetric efficiency • High frequency capacitance retention • 100% accelerated steady state aging • 100% surge current tested • EIA standard case sizes • Halogen-free epoxy and RoHS compliant • Lead free 260°C reflow capable Applications Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Typical applications include high speed server, microprocessor decoupling and high ripple current applications. Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn or Ni-Pd-Au. K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 1 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Ordering Information T 528 Z 337 Capacitor Class Series Case Size Capacitance Code (pF) B W Z First two digits represent significant figures. Third digit specifies number of zeros. T= Tantalum 528 = Low ESL Facedown Terminal Polymer M 2R5 A Capacitance Rated Voltage Failure Rate/ Tolerance (VDC) Design M= ±20% 002 = 2 2R5 = 2.5 004 = 4 006 = 6.3 A= N/A T E009 Termination Finish ESR Code T = 100% Matte Tin (Sn)-plated P = Ni-Pd-Au-plated E = ESR last three digits specify ESR in mΩ (009 = 9 mΩ) Packaging (C-Spec) Blank = 7" reel 7280 = 13" reel Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range DF (120 Hz) ESR (100 kHz) Leakage Current −55°C to 105°C 150 – 470 µF at 120 Hz/25°C M Tolerance (20%) 2 – 6.3 V ≤ 10% - Refer to Part Number Electrical Specification Table Refer to Part Number Electrical Specification Table ≤ 0.1 CV (µA) at rated voltage after 5 minutes © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 2 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Qualification Test Condition Characteristics Δ C/C Endurance 105°C at rated voltage, 2,000 hours ≤ Initial Limit DCL Within 1.25 x initial limit ESR Within 2.0 x initial limit Δ C/C Storage Life 105°C at 0 volts, 2,000 hours Temperature Stability 60°C, 90% RH, No Load, 500 hours Extreme temperature exposure at a succession of continuous steps at −55°C, +25°C, +85°C, +105°C Within initial limits DCL Within 1.25 x initial limit ESR Within 2.0 x initial limit Mechanical Shock/ Vibration Within −5/+35% of initial value DF ≤ Initial limit DCL Within 5.0 x initial limit ESR Within 2.0 x initial limit +25°C −55°C +85°C +105°C Δ C/C IL* ±20% ±20% ±30% DF IL IL 1.2 x IL 1.5 x IL DCL IL N/A 10 x IL 10 x IL Δ C/C Surge Voltage Within −20/+10% of initial value DF Δ C/C Humidity Within −20/+10% of initial value DF 105°C, 1.32 x rated voltage 1,000 cycles MIL-STD-202, Method 213, Condition I, 100 G peak MIL-STD-202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within −20/+10% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Δ C/C Within ±10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 3 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Reliability KO-CAP capacitors have an average failure rate of 0.5 %/1,000 hours at category voltage, UC, and category temperature, TC. These capacitors are qualified using industry test standards at UC and TC. The minimum test time (1,000 or 2,000 hours) is dependent on the product. The actual life expectancy of KO-CAP capacitors increases when application voltage, UA, and application temperature, TA, are lower than UC and TC. As a general guideline, when UA < 0.9 * UC and TA < 85°C, the life expectancy will typically exceed the useful lifetime of most hardware (> 10 years). The lifetime of a KO-CAP capacitor at a specific application voltage and temperature can be modeled using the equations below. A failure is defined as passing enough current to blow a 1-Amp fuse. The calculation is an estimation based on empirical results and is not a guarantee. VAF = [ ( TAF = e ( ) UC n UA Ea 1 1 k 273+TA 273+TC )] where: TAF = acceleration factor due to temperature, unitless Ea = activation energy, 1.4 eV where: VAF = acceleration factor due to voltage, unitless UC = category voltage, volt UA = application voltage, volt k = Boltzmann’s constant, 8.617E-5 eV/K TA = application temperature, °C n = exponent, 16 TC = category temperature, °C AF = VAF * TAF LifeU ,T = LifeU ,T * AF A A C C where: where: LifeUA, TA = guaranteed life application voltage and temperature, years AF = acceleration factor, unitless LifeUC, TC = guaranteed life category voltage and temperature, years TAF = accerlation factor due to temperature, unitless VAF = acceleration factor due to voltage, unitless AF = acceleration factor, unitless Reliability Table 1 – Common temperature range classifications 85°C (TR)/ 85°C (TC) 105°C (TR)/ 105°C (TC) 105°C (TR)/ 125°C (TC) Rated Voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category Voltage (UC) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Rated Voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category Voltage (UC) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Rated Voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category Voltage (UC) 1.7 2.7 4.2 5.4 6.7 8.4 10.7 13.4 16.8 23.5 33.5 42.2 50.3 Terms: Category Voltage, UC : Maximum recommended peak DC operating voltage for continuous operation at the category temperature, TC Rated Voltage, U R : Maximum recommended peak DC operating voltage for continuous operation up to the rated temperature, TR Category Temperature, TC : Maximum recommended operating temperature; voltage derating may be required at TC Rated Temperature, TR : Maximum recommended operating temperature without voltage derating; TR is equal to or lower than TC © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 4 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency 1,000 10 T528Z337M2R5ATE009_Imp 1 T528Z337M2R5ATE007_Imp T528Z337M2R5ATE012_ESR Capacitance (µF) Impedance, ESR (Ohms) T528Z337M2R5ATE012_Imp T528Z337M2R5ATE009_ESR T528Z337M2R5ATE007_ESR 0.1 100 10 0.01 T528Z337M2R5ATE012 T528Z337M2R5ATE009 T528Z337M2R5ATE007 0.001 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 1 1,000 10,000,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Dimensions – Millimeters B Case END VIEW BOTTOM VIEW SIDE VIEW H L W (–) (+) S1 S2 F W and Z Cases END VIEW BOTTOM VIEW SIDE VIEW H (–) L W (+) F Termination cutout at KEMET's option, either end S2 S1 Case Size Typical Weight Component Dimensions KEMET EIA L W H F ±0.2 S1 S2 (mg) B 3528–20 3.5 ±0.2 2.8 ±0.2 1.9 ±0.1 2.2 0.8 ±0.3 0.8 ±0.3 94.85 W 7343–15 7.3 ±0.4 4.3 ±0.3 1.4 ±0.1 2.8 5.0 ±0.4 1.3 ±0.2 222.95 Z 7343–17 7.3 ±0.4 4.3 ±0.3 1.6 ±0.1 2.8 5.0 ±0.4 1.3 ±0.2 206.33 These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 5 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Table 1 – Ratings & Part Number Reference Rated Rated Case Code/ Voltage Capacitance Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current % at +25°C 120 Hz Maximum 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 mΩ at +25°C 100 kHz Maximum 6 9 6 6 9 9 5 6 7 8 9 12 5 6 8 9 12 7 8 9 12 9 12 7 8 9 12 9 12 MSL Maximum Operating Temp (rms) mA at +45°C 100 kHz 3,900 3,200 7,400 3,900 3,200 6,000 8,100 7,400 6,800 6,400 6,000 5,200 8,100 7,400 6,400 6,000 5,200 6,800 6,400 6,000 5,200 6,000 5,200 6,800 6,400 6,000 5,200 6,000 5,200 Reflow Temp ≤ 260°C °C 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 VDC at 105°C µF KEMET/EIA (See below for part options) 2 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 270 270 220 270 270 330 330 330 330 330 330 330 470 470 470 470 470 220 220 220 220 330 330 150 150 150 150 220 220 B/3528-20 B/3528-20 Z/7343-17 B/3528-20 B/3528-20 W/7343-15 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 Z/7343-17 T528B277M002APE006 T528B277M002APE009 T528Z227M2R5ATE006 T528B277M2R5APE006 T528B277M2R5APE009 T528W337M2R5ATE009 T528Z337M2R5ATE005 T528Z337M2R5ATE006 T528Z337M2R5ATE007 T528Z337M2R5ATE008 T528Z337M2R5ATE009 T528Z337M2R5ATE012 T528Z477M2R5ATE005 T528Z477M2R5ATE006 T528Z477M2R5ATE008 T528Z477M2R5ATE009 T528Z477M2R5ATE012 T528Z227M004ATE007 T528Z227M004ATE008 T528Z227M004ATE009 T528Z227M004ATE012 T528Z337M004ATE009 T528Z337M004ATE012 T528Z157M006ATE007 T528Z157M006ATE008 T528Z157M006ATE009 T528Z157M006ATE012 T528Z227M006ATE009 T528Z227M006ATE012 µA at +25°C Maximum/ 5 Minutes 54.0 54.0 55.0 67.5 67.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 117.5 117.5 117.5 117.5 117.5 88.0 88.0 88.0 88.0 132.0 132.0 94.5 94.5 94.5 94.5 138.6 138.6 VDC at 105°C µF KEMET/EIA (See below for part options) µA at +25°C Maximum/ 5 Minutes % at +25°C 120 Hz Maximum mΩ at +25°C 100 kHz Maximum (rms) mA at +45°C 100 kHz Reflow Temp ≤ 260°C °C Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current MSL Maximum Operating Temp Other part number options: 1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 6 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Derating Guidelines 95% −55°C to 105°C 2 V ≤ VR ≤ 6.3 V Maximum Transient Voltage 90% % Rated Voltage Voltage Rating 100% Maximum Recommended Steady State Voltage 90% of VR VR = Rated Voltage 85% Recommended Application Voltage 80% 75% 70% 65% 60% 55% 50% −55 25 85 Temperature (°C) 105 Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. KEMET Case Code EIA Case Code Maximum Power Dissipation (Pmax) mWatts at 45°C with +30°C Rise B W Z 3528-20 7343-15 7343-17 127 325 325 Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √P max/R E(max) = Z √P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) Temperature Compensation Multipliers for Maximum Ripple Current T ≤ 45°C 1.00 45° C < T ≤ 85°C 0.70 85°C < T ≤ 125°C 0.25 T = Environmental Temperature The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 7 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Reverse Voltage Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. Temperature Permissible Transient Reverse Voltage 25°C 55°C 85°C 105°C 125°C* 15% of Rated Voltage 10% of Rated Voltage 5% of Rated Voltage 3% of Rated Voltage 1% of Rated Voltage *For Series Rated to 125°C Table 2 – Land Dimensions/Courtyard Metric Density Level A: Maximum (Most) Land Protrusion (mm) KEMET Size Code Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA L1 L2 W S1 S2 V1 V2 L1 L2 W S1 S2 V1 V2 L1 L2 W S1 S2 V1 V2 B 3528-20 2.20 2.20 2.35 0.46 0.46 6.32 4.00 1.80 1.80 2.23 0.56 0.56 5.22 3.50 1.42 1.42 2.13 W1 7343-15 6.48 2.68 3.04 −1.82 1.98 10.32 5.60 6.18 2.38 2.92 −1.82 1.98 9.22 5.10 5.82 2.02 2.82 −1.76 2.04 8.36 4.84 Z1 7343-17 6.48 2.68 3.04 −1.82 1.98 10.32 5.60 6.18 2.38 2.92 −1.82 1.98 9.22 5.10 5.82 2.02 2.82 −1.76 2.04 8.36 4.84 0.64 0.64 4.36 3.24 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Negative values of S1 mean that pad lies at the center's right side. V1 W, Z Case B Case L1 L1 L2 W V2 W S1 S2 V1 L2 W W V2 S1 S2 Grid Placement Courtyard Grid Placement Courtyard © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 8 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Soldering Process Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. “Wiping” the edges of a chip and heating the top surface is not recommended. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100°C 150°C Temperature Maximum (TSmax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds Ramp-up Rate (TL to TP) 3°C/second maximum 3°C/second maximum Liquidous Temperature (TL) 183°C 217°C Time Above Liquidous (tL) 60 – 150 seconds 220°C* 235°C** 60 – 150 seconds 250°C* 260°C** 20 seconds maximum 30 seconds maximum 6°C/second maximum 6°C/second maximum 6 minutes maximum 8 minutes maximum Peak Temperature (TP) Time within 5°C of Maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) Time 25°C to Peak Temperature Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. * For Case Size height > 2.5 mm ** For Case Size height ≤ 2.5 mm TP TL Temperature KEMET’s families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp-up Rate = 3°C/second Maximum Ramp-down Rate = 6°C/second tL Tsmax Tsmin 25 ts 25°C to Peak Time Storage All KO-CAP series are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC). These parts are classified as MSL3 (Moisture Sensitivity Level 3) per IPC/JEDEC J–STD–020 and packaged per IPC/JEDEC J–STD–033. MSL3 specifies a floor time of 168 H at 30°C maximum temperature and 60% relative humidity. Unused capacitors should be sealed in a MBB with fresh desiccant. The calculated shelf life in a sealed bag would be 12 months from a bag seal date in a storage environment of < 40°C and humidity < 90% RH. It should be 24 months from a bag seal date in a storage environment of < 30°C and humidity < 70% RH. If baking is required, refer to IPC/JEDEC J–STD–033 for bake procedure. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 9 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Construction Detailed Cross Section Polarity Stripe (+) Carbon (Third Layer) Silver Paint (Fourth Layer) Wire Molded Epoxy Case Wire Polymer (Second Layer) Ta2O5 Dielectric (First Layer) Tantalum Leadframe (+ Anode) Leadframe (− Cathode) Spacer Weld (to attach wire) Capacitor Marking KEMET Organic Polymer Polarity Indicator (+) Picofarad Code Rated Voltage Date Code * 1 digit = last number of year 6 = 2016 7 = 2017 8 = 2018 9 = 2019 0 = 2020 2nd and 3rd digit = week of the year 01 = 1st week of the year to 52 = 52nd week of the year st KEMET ID Date Code* * 908 = 8th week of 2019 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 10 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only (+) Embossed carrier (−) Embossment Top tape thickness 0.10 mm (0.004”) maximum thickness 180 mm (7.0”) or 330 mm (13.”) 8 mm (0.315”) or 12 mm (0.472”) Table 3 – Packaging Quantity Case Code KEMET P R I S A T M B U L C Q W Z V D Y X J H O EIA 2012-10 2012-12 3216-10 3216-12 3216-18 3528-12 3528-15 3528-21 6032-15 6032-19 6032-28 7343-12 7343-15 7343-17 7343-19 7343-31 7343-40 7343-43 7360-15 7360-20 7360-43 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 8 8 8 8 8 12 12 12 12 12 12 12 12 12 12 12 12 12 3,000 2,500 3,000 2,500 2,000 3,000 2,500 2,000 1,000 1,000 500 1,000 1,000 1,000 1,000 500 500 500 1,000 1,000 250 N/A 10,000 N/A 10,000 N/A 10,000 8,000 8,000 5,000 3,000 3,000 3,000 3,000 3,000 3,000 2,500 2,000 2,000 3,000 3,000 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 11 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Figure 1 – Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ØD0 P0 (10 pitches cumulative tolerance on tape ±0.2 mm) A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity B1 is for tape feeder reference only, including draft concentric about B0. Embossment For cavity size, see Note 1, Table 4 ØD1 Cover Tape User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size 8 mm 12 mm D1 Minimum Note 1 D0 1.5 +0.10/−0.0 (0.059 +0.004/−0.0) 1.0 (0.039) 1.5 (0.059) E1 P0 R Reference S1 Minimum T1 T Maximum Note 2 Note 3 Maximum P2 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) 25.0 (0.984) 30 (1.181) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 8 mm Single (4 mm) 4.35 (0.171) 6.25 (0.246) 12 mm Single (4 mm) and Double (8 mm) 8.2 (0.323) 10.25 (0.404) E2 Minimum F P1 3.5 ±0.05 2.0 ±0.05 or 4.0 ±0.10 (0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004) 2.0 ±0.05 (0.079 ±0.002) or 5.5 ±0.05 4.0 ±0.10 (0.157 ±0.004) or (0.217 ±0.002) 8.0 ±0.10 (0.315 ±0.004) T2 Maximum W Maximum A0, B0 & K0 2.5 (0.098) 8.3 (0.327) 4.6 (0.181) 12.3 (0.484) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 12 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Packaging Information Performance Notes 1. Cover tape break force: 1.0 kg minimum. 2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8, 12 Bo Maximum Rotation ( 20 ° T) ° s Tape Maximum Width (mm) Rotation ( 8, 12 20 Typical Component Centerline ° S) Ao Figure 3 – Maximum Lateral Movement Figure 4 – Bending Radius 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum Embossed Carrier Punched Carrier R © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Bending Radius R T2018_T528 • 11/30/2020 13 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Figure 5 – Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (Ø 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 ±0.20 (7.008 ±0.008) or 330 ±0.20 (13.000 ±0.008) 1.5 (0.059) 13.0 +0.5/−0.2 (0.521 +0.02/−0.008) 20.2 (0.795) 12 mm Variable Dimensions — Millimeters (Inches) Tape Size 8 mm 12 mm N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/−0.0 (0.331 +0.059/−0.0) 12.4 +2.0/−0.0 (0.488 +0.078/−0.0) 14.4 (0.567) 18.4 (0.724) Shall accommodate tape width without interference © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 14 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier 8 mm & 12 mm only END Carrier Tape Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum Leader 400 mm minimum Top Cover Tape Figure 7 – Maximum Camber Elongated Sprocket Holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 15 KEMET Organic Capacitor (KO-CAP ®) – Miniature T528 Low ESL Polymer Electrolytic for CPU/GPU Decoupling KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2018_T528 • 11/30/2020 16
T528Z157M006ATE009 价格&库存

很抱歉,暂时无法提供与“T528Z157M006ATE009”相匹配的价格&库存,您可以联系我们找货

免费人工找货