0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
T591V107M010ATE045

T591V107M010ATE045

  • 厂商:

    KEMET(基美)

  • 封装:

    V7343-20

  • 描述:

    钽聚合物电容器 V7343-20 100µF ±20% 10V 45mΩ

  • 详情介绍
  • 数据手册
  • 价格&库存
T591V107M010ATE045 数据手册
KEMET Organic Capacitor (KO-CAP®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 – 50 VDC Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode, capable of delivering very low ESR and an improved capacitance retention at high frequencies. KO-CAP combines the low ESR of the multilayer ceramic, the high capacitance of aluminum electrolytic and the volumetric efficiency of tantalum into a single surface mount package. Unlike liquid electrolyte-based capacitors, KO-CAP has a very long operational life and a high ripple current capabilities. The T591/T597/T598/T599 High Humidity and High Temperature Polymer Electrolytic capacitors deliver higher capacitance and ESR stability under harsh environmental conditions. Enhancements to the design and selected material upgrades were introduced to deliver 500 hours (T591) or 1,000 hours (T598, T599) at 85°C/85% RH rated voltage and to fully comply with the AEC-Q200 qualification testing with maximum operational temperature life up to 125ºC and 150ºC respectively. These capacitors are manufactured in an ISO TS 16949 certified plants and are subjected to PPAP/PSW, as well as change control. Benefits Applications • Ultra low ESR • Full compliance with AEC-Q200 qualification test plan (T597 FD 125°C, T598 125°C, T599 150°C) • Qualification plan based on AEC–Q200 with 85°C/85% RH load specification limited to 500 hours (T591) • Extended endurance test qualification for T598/T599 (VR < 16 V) , up to 2,000 hours 125°C • Dedicated H termination and Surge current testing options (T598) for Defense and Aerospace Segment • TS 16949 certified plants • Subject to PPAP/PSW and change control • Meets or exceeds EIA standard 535BAAC • Tape & Reel standard packaging per EIA 481 • Halogen-free epoxy and RoHS compliant Typical applications include decoupling and filtering in a variety of market segments, with special emphasis in automotive applications such as infotainment, ADAS, chassis and safety, as well as powertrain, where harsh conditions, such as high humidity and temperature, are a concern. Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 1 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information Standard Construction T 59X Capacitor Class Series T = Tantalum D 107 Case Size Capacitance Code (pF) B D V X First two digits represent significant figures. Third digit specifies number of zeros. M = ±20% K = ±10% S 476 M Case Size Capacitance Code (pF) P S First two digits represent significant figures. Third digit specifies number of zeros. 591 = 500 Hours load humidity 598 = AEC-Q200 qualified (125°C) 599 = AEC-Q200 qualified (150°C) Face Down Construction T 597 Capacitor Class Series T = Tantalum 597 = AEC-Q200 qualified (125°C) face down construction M Series Case Size T= Tantalum 598 = AEC-Q200 qualified (125°C) B D V X T 2R5 = 2.5 006 = 6.3 010 = 10 016 = 16 020 = 20 025 = 25 035 = 35 050 = 50 A = N/A 006 M = ±20% M M = ±20% K = ±10% 2R5 = 2.5 006 = 6.3 010 = 10 010 Rated Voltage (VDC) 2R5 = 2.5 004 = 4 006 = 6.3 010 = 10 016 = 16 025 = 25 035 = 35 050 = 50 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T = 100% Tin (Sn) A Capacitance Rated Voltage Failure Rate/ Tolerance (VDC) Design Capacitance Capacitance Code (pF) Tolerance First two digits represent significant figures. Third digit specifies number of zeros. A Capacitance Rated Voltage Failure Rate/ Termination Tolerance (VDC) Design Finish Up-Screen with H Termination and Surge Option T 598 D 107 Capacitor Class 010 A = N/A A ESR Maximum ESR in mΩ, 025 = 25 mΩ P E200 Termination Finish ESR P = Ni-Pd-Au H Failure Termination Rate/ Finish Design A= N/A E025 H= Standard solder coated (SnPb 5% Pb minimum) Maximum ESR in mΩ, 200 = 200 mΩ Packaging (C-Spec) Blank = 7" Reel 7280 = 13" Reel Packaging (C-Spec) Blank = 7" Reel E 040 Surge ESR Packaging (C-Spec) E= None S = 10 cycles 25°C Maximum ESR in mΩ, 040 = 40 mΩ Blank = 7" Reel 7280 = 13" Reel T2073_T59X • 2/19/2021 2 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range −55°C to 105°C/125°C/150°C 10 – 470 µF at 120 Hz/25°C K Tolerance (10%), M Tolerance (20%) 2.5 – 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.1 CV (µA) at rated voltage after 5 minutes T597: ≤ 0.3 CV (µA) at rated voltage after 5 minutes Environmental Compliance • RoHS compliant (10/10) according to Directive 2002/95/EC as amended by (EU) 2015/863 when ordered with 100% Sn (AT) or Ni-Pd-Au (AP) termination • End of Life Vehicle compliant according to 2003/53/EC as amended by (EU) 2016/774 when ordered with 100% Sn (AT) or Ni-Pd-Au (AP) termination. • NOT RoHS or End of Life Vehicle compliant when ordered with SnPb termination (AH) due to the content of Lead (CAS # 7439-92-1) in the termination. • REACH Candidate list of substance of very high concern, Lead (CAS# 7439-92-1) contained when ordered with SnPb termination (AH) • Halogen-free © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 3 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Halogen-free. Qualification Test Endurance Storage Life Humidity Condition Characteristics Temperature: 105°C,125°C,150°C *2 Voltage: 1.0 Rated Voltage 2/3 Rated Voltage for > 125°C rating PN Time: 2,000 Hours 1,000 Hours for T597 & T599, VR > 16 V Δ C/C DF Within 2 x initial limit DCL Within 2 x initial limit ESR Δ C/C Temperature: 105°C,125°C,150°C *2 Voltage: 0 Voltage Time: 2,000 Hours 1,000 Hours for > 125°C rating PN Within 2 x initial limit DCL Within 2 x initial limit ESR Within 2 x initial limit Within 1.5 x initial limits DCL Within initial limit ESR MIL–STD–202, Method 106, 65°C, 90 – 100% RH, no load, 10 cycles DF Within initial limit Within initial limit ESR Within 2 x initial limit Surge Voltage Temperature Stability Mechanical Shock/ Vibration DF JESD22, Test Method A104, −55°C to +105°C/+125°C/+150°C *2, 1,000 cycles Extreme temperature exposure at a succession of continuous steps at +25°C, −55°C, +25°C, +85°C, +105°C/+125°C/+150°C *2, +25°C Within −20%/+10% of initial value Within initial limits DCL Within initial limit ESR Within 2 x initial limits Δ C/C 105°C, 1.32 x rated voltage, 1,000 cycles, 33 Ω in series 125°C/150°C, 1.32 x (0.67 x VR), 1,000 cycles, 33 Ω in series*2 Within 2 x initial limit Within −10%/+20% of initial value DCL Δ C/C Temperature Cycling Within −5%/+35% of initial value DF Δ C/C Moisture Resistance*1 Within 2 x initial limit Within −20%/+10% of initial value DF Δ C/C 85°C, 85% RH, load, 500 hours (T591) 85°C, 85% RH, load, 1,000 hours (T597, T598, T599) Within −20%/+10% of initial value Within −20%/+10% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits +25°C −55°C +85°C +105°C/+125°C/+150°C *2 Δ C/C IL ±20% ±20% ±30%*4 DF IL IL 1.2 x IL 1.5 x IL DCL IL N/A 10 x IL 10 x IL AEC–Q200 (MIL–STD–202, Method 213, Figure 1, Condition F.) AEC–Q200 (MIL–STD–202, Method 204, 5 G for 20 minutes/12 cycles each of 3 orientations. Test from 10 – 2, 000 Hz.) *3 Δ C/C Within ±10% of initial value DF Within initial limits ESR Within initial limits DCL Within initial limits T598 only Refer to part number specifications for individual temperature classification *3 IL = Initial limit *4 For T599 (≤ 16 V) apply −30%/+40% *1 *2 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 4 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Reliability KO-CAP capacitors have an average failure rate of 0.5 %/1,000 hours at category voltage, UC, and category temperature, TC. These capacitors are qualified using industry test standards at UC and TC. The minimum test time (1,000 hours or 2,000 hours) is dependent on the product. The actual life expectancy of KO-CAP capacitors increases when application voltage, UA, and application temperature, TA, are lower than UC and TC. As a general guideline, when UA < 0.9 * UC and TA < 85°C, the life expectancy will typically exceed the useful lifetime of most hardware (> 10 years). The lifetime of a KO-CAP capacitor at a specific application voltage and temperature can be modeled using the equations below. A failure is defined as passing enough current to blow a 1-amp fuse. The calculation is an estimation based on empirical results and is not a guarantee. VAF = [ ( TAF = e ( ) UC n UA Ea 1 1 k 273+TA 273+TC )] where: TAF = acceleration factor due to temperature, unitless Ea = activation energy, 1.4 eV where: VAF = acceleration factor due to voltage, unitless UC = category voltage, volt UA = application voltage, volt k = Boltzmann’s constant, 8.617E-5 eV/K TA = application temperature, °C n = exponent, 16 TC = category temperature, °C AF = VAF * TAF LifeU ,T = LifeU ,T * AF A A C C where: where: LifeUA, TA = guaranteed life application voltage and temperature, years AF = acceleration factor, unitless LifeUC, TC = guaranteed life category voltage and temperature, years TAF = accerlation factor due to temperature, unitless VAF = acceleration factor due to voltage, unitless AF = acceleration factor, unitless Reliability Table 1 – Common Temperature Range Classifications 85°C (TR)/ 85°C (TC) 105°C (TR)/ 105°C (TC) 105°C (TR)/ 125°C (TC) 105°C (TR)/ 150°C (TC) Rated voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category voltage (UC) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Rated voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category voltage (UC) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Rated voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category voltage (UC) 1.7 2.7 4.2 5.4 6.7 8.4 10.7 13.4 16.8 23.5 33.5 42.2 50.3 Rated voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category voltage (UC) 1.7 2.7 4.2 5.4 6.7 8.4 10.7 13.4 16.8 23.5 33.5 42.2 50.3 Terms: Category voltage, UC : Maximum recommended peak DC operating voltage for continuous operation at the category temperature, TC. Rated voltage, U R : Maximum recommended peak DC operating voltage for continuous operation up to the rated temperature, TR. Category temperature, TC : Maximum recommended operating temperature. Voltage derating may be required at TC. Rated temperature, TR : Maximum recommended operating temperature without voltage derating. TR is equal to or lower than TC. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 5 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Certification KEMET's internal qualification plan for this polymer electrolytic series of capacitors follows AEC-Q200 guidelines. For T591 the humidity bias is limited to a maximum of 500 hours. For T597 and T598 the qualification plan is fully compliant with AEC-Q200 with maximum operational temperature of 125°C. For T599 the qualification plan is fully compliant with AEC-Q200 with maximum operational temperature of 150°C. Electrical Characteristics Capacitance vs. Frequency – T591 ESR vs. Frequency – T591 I M P E D A N C E _ E S R 1000 v s F r e q u e n c y C a p a c i t a n c e v s F r e q u e n c y 1000 IMP D, 10 µF B , 47 µF D, 47 µF D, 100 µF V, 220 µF 10 100 Capacitance (µF) Impedance , ESR (Ohms) 100 1 0.1 10 0.01 1 0.001 100 1,000 10,000 Frequency (Hz) 100,000 1,000,000 100 1,000 10,000 Frequency (Hz) 100,000 1,000,000 10,000,000 10,000,000 Capacitance vs. Frequency – T597 ESR vs. Frequency – T597 IMPEDANCE_ESR vs Frequency 100 Capacitance vs Frequency 1,000 47 µF/6 V 33 µF/6 V 22 µF/6 V 22 µF/10 V 100 Capacitance (µF) Impedance, ESR (Ohms) 10 1 10 0.1 1 0.01 100 1,000 10,000 100,000 1,000,000 Frequency (Hz) 100 1,000 10,000 100,000 1,000,000 10,000,000 Frequency (Hz) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 6 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Electrical Characteristics cont. Capacitance vs. Frequency – T598 ESR vs. Frequency – T598 I M P E D A N C E _ E S R v s F r e q u e n c y C a p a c i t a n c e v s F r e q u e n c y 100 1000 100 Capacitance (µF) Impedance & ESR (Ohms) 10 1 0.1 B 47µF 10 D 100µF / 16 V D 100µF / 10V D 220µF/ 10V 1 0.01 0.1 0.001 100 1000 10000 100000 1000000 100 1000 10000 Frequency (Hz) v s 1000000 10000000 Capacitance vs. Frequency – T599 ESR vs. Frequency – T599 I M P E D A N C E _ E S R 100000 Frequency (Hz) 10000000 F r e q u e n c y C a p a c i t a n c e v s F r e q u e n c y 100 100 Capacitance (µF) Impedance & ESR (ohms) 10 X, 33 µF _ IMP X, 33 µF _ ESR 1 X, 33µF 10 1 0.1 0.01 100 1,000 10,000 100,000 1,000,000 10,000,000 Frequency (Hz) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 0 100 1,000 10,000 100,000 1,000,000 10,000,000 Frequency (Hz) T2073_T59X • 2/19/2021 7 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Dimensions – Millimeters (Inches) Metric will govern T591 / T598 / T599 CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A B W B Glue pad shape/design at KEMET's option H X T S S Case Size KEMET B D V X P Termination cutout at KEMET's option, either end R F L Typical Weight Component Dimensions EIA L 3.5 ±0.2 (0.138 ±0.008) 7.3 ±0.3 7343–31 (0.287 ±0.012) 7.3 ±0.3 7343-20 (0.287 ±0.012) 7.3 ±0.3 7343-43 (0.287 ±0.012) 3528–21 W H 2.8 ±0.2 (0.110 ±0.008) 4.3 ±0.3 (0.169 ±0.012) 4.3 ±0.3 (0.169 ±0.012) 4.3 ±0.3 (0.169 ±0.012) 1.9 ±0.2 (0.075 ±0.008) 2.8 ±0.3 (0.110 ±0.012) 1.9 ±0.1 (0.075 ±0.004) 4.0 ±0.3 (0.157±0.012) F ±0.1 S ±0.3 B ±0.15 ±(0.004) ±(0.012) (Ref) ±0.006 2.2 (0.087) 2.4 (0.094) 2.4 (0.094) 2.4 (0.094) 0.8 (0.031) 1.3 (0.051) 1.3 (0.051) 1.3 (0.051) 0.4 (0.016) 0.5 (0.020) N/A 0.5 (0.020) X (Ref) P (Ref) R (Ref) T A (Ref) (Minimum) 0.10 ±0.10 0.5 (0.004 ±0.004) (0.020) 0.10 ±0.10 0.9 (0.004 ±0.004) (0.035) 0.05 N/A (0.002) 0.10 ±0.10 1.7 (0.004 ±0.004) (0.067) 1.0 (0.039) 1.0 (0.039) 0.13 (0.005) 0.13 (0.005) 0.13 (0.005) 0.13 (0.005) N/A 1.0 (0.039) (mg) 1.1 (0.043) 3.8 (0.150) 3.8 (0.150) 3.8 (0.150) 95 435 274 554 Notes: Reference (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P, or R, because these cases do not have a bevel or a notch. These weights are provided as reference. If exact weights are needed, please contact your KEMET sales representative. T597 END VIEW BOTTOM VIEW SIDE VIEW H F L W S Case Size KEMET S Component Dimensions EIA P 2012-10 S 3216-12 Weight L W H F ±0.1 (±0.004) S ±0.2 (±0.008) 2.0 ±0.2 (0.079±0.008) 3.2 ± 0.2 (0.126 ±0.008) 1.2 ±0.2 (0.047±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.9 ±0.1 (0.035±0.004) 1.1 ±0.1 (0.043 ±0.004) 0.9 (0.035) 1.2 (0.047) 0.55 (0.022) 0.8 (0.031) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com (mg) 11.3 26.2 T2073_T59X • 2/19/2021 8 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Table 1 – Ratings & Part Number Reference Rated Voltage Rated Cap Case Code/ Case Size VDC at 105°C µF KEMET/EIA 2.5 2.5 2.5 2.5 2.5 2.5 4 4 4 6.3 100 100 220 220 220 220 100 220 220 220 B/3528-21 B/3528-21 B/3528-21 V/7343-20 V/7343-20 V/7343-20 B/3528-21 V/7343-20 V/7343-20 B/3528-21 T591B107M2R5ATE055 T591B107M2R5ATE070 T591B227M2R5ATE025 T591V227M2R5ATE009 T591V227M2R5ATE012 T591V227M2R5ATE015 T591B107M004ATE070 T591V227M004ATE018 T591V227M004ATE025 T591B227M006ATE035 25 25 55 55 55 55 40 88 88 139 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 100 100 100 100 100 330 330 330 330 470 470 470 470 100 100 100 100 100 150 150 150 150 150 150 330 330 330 330 22 22 33 33 33 33 47 47 68 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 V/7343-20 V/7343-20 V/7343-20 V/7343-20 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T598B107M2R5ATE045 T591B107M2R5ATE045 T598B107M2R5ATE055 T598B107M2R5ATE070 T598B227M2R5ATE025 T591V337M2R5ATE012 T591V337M2R5ATE025 T591D337M2R5ATE015 T591D337M2R5ATE018 T598D477M2R5ATE006 T591D477M2R5ATE006 T591D477M2R5ATE009 T598D477M2R5ATE009 T598B107M004ATE045 T598B107M004ATE055 T598B107M004ATE070 T591B107M004ATE045 T591B107M004ATE055 T598B157M004ATE045 T598B157M004ATE055 T598B157M004ATE070 T591B157M004ATE045 T591B157M004ATE055 T591B157M004ATE070 T598V337M004ATE025 T598V337M004ATE045 T591V337M004ATE025 T591V337M004ATE045 T598B226M006ATE070 T591B226M006ATE070 T598B336M006ATE070 T598B336M006ATE080 T591B336M006ATE070 T591B336M006ATE080 T598B476M006ATE070 T591B476M006ATE070 T598B686M006ATE070 25 25 25 25 55 82.5 82.5 82.5 82.5 117.5 117.5 117.5 117.5 40 40 40 40 40 60 60 60 60 60 60 132 132 132 132 13.9 13.9 20.8 20.8 20.8 20.8 29.6 29.6 43 VDC at 105°C µF KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF MSL Maximum Operating Temp AEC-Q200 Qualified (rms) mA at +45°C 100 kHz Reflow Temp ≤ 260°C °C T597/T598/T599 Only1 55 70 25 9 12 15 70 18 25 35 1,570 1,390 2,320 6,670 5,770 5,160 1,390 4,710 4,000 1,960 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 45 45 55 70 25 12 25 15 18 6 6 9 9 45 55 70 45 55 45 55 70 45 55 70 25 45 25 45 70 70 70 80 70 80 70 70 70 1,730 1,730 1,570 1,390 2,320 5,770 4,000 5,480 5,000 8,660 8,660 7,070 7,070 1,730 1,570 1,390 1,730 1,570 1,730 1,570 1,390 1,730 1,570 1,390 4,000 2,980 4,000 2,980 1,390 1,390 1,390 1,300 1,390 1,300 1,390 1,390 1,390 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 • mA at +45°C 100 kHz Reflow Temp ≤ 260°C °C T598/T599 Only1 Maximum Allowable Ripple Current MSL Maximum Operating Temp AEC–Q200 Qualified ESR µA at +25°C % at +25°C mΩ at +25°C Max/5 Minutes 120 Hz Max 100 kHz Max 105°C 8 8 8 10 10 10 10 10 10 8 125°C 8 8 8 8 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 8 8 8 8 8 8 8 8 8 µA at +25°C % at +25°C mΩ at +25°C Max/5 Minutes 120 Hz Max 100 kHz Max KEMET Part Number DC Leakage DF Maximum Allowable Ripple Current ESR • • • • • • • • • • • • • • • • • • (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert E = None or S = 10 cycles +25°C ±5°C. Designates surge current option. 1 T598 = AEC-Q200 qualified. T599 AEC-Q200 qualified 150°C and T591 = limited to 500 hours at 85°C/85% RH load. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 9 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size VDC at 105°C µF KEMET/EIA 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 10 10 10 10 68 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 680 680 22 22 33 33 33 33 47 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 VDC at 105°C µF KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR µA at +25°C % at +25°C mΩ at +25°C Max/5 Minutes 120 Hz Max 100 kHz Max T591B686M006ATE070 T598B107M006ATE045 T598B107M006ATE055 T598B107M006ATE070 T591B107M006ATE045 T591B107M006ATE055 T591B107M006ATE070 T598B157M006ATE045 T598B157M006ATE055 T598B157M006ATE070 T591B157M006ATE045 T591B157M006ATE055 T591B157M006ATE070 T598V157M006ATE025 T598V157M006ATE045 T591V157M006ATE025 T591V157M006ATE045 T598D157M006ATE025 T598D157M006ATE045 T591D157M006ATE025 T591D157M006ATE045 T591B227M006ATE045 T591B227M006ATE070 T598D227M006ATE025 T598D227M006ATE040 T598D227M006ATE080 T591D227M006ATE025 T591D227M006ATE040 T591D227M006ATE080 T598V227M006ATE025 T598V227M006ATE045 T591V227M006ATE025 T591V227M006ATE045 T598D337M006ATE025 T598D337M006ATE040 T598D337M006ATE080 T591D337M006ATE025 T591D337M006ATE040 T591D337M006ATE080 T598X687M006ATE025 T591X687M006ATE025 T598B226M010ATE070 T591B226M010ATE070 T598B336M010ATE070 T598B336M010ATE080 T591B336M010ATE070 T591B336M010ATE080 T598B476M010ATE070 43 63 63 63 63 63 63 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 139 139 139 139 139 139 139 139 139 139 139 139 208 208 208 208 208 208 428 428 22 22 33 33 33 33 47 125°C 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 70 45 55 70 45 55 70 45 55 70 45 55 70 25 45 25 45 25 45 25 45 45 70 25 40 80 25 40 80 25 45 25 45 25 40 80 25 40 80 25 25 70 70 70 80 70 80 70 µA at +25°C % at +25°C mΩ at +25°C Max/5 Minutes 120 Hz Max 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current MSL Maximum Operating Temp AEC-Q200 Qualified (rms) mA at +45°C 100 kHz Reflow Temp ≤ 260°C °C T597/T598/T599 Only1 1,390 1,730 1,570 1,390 1,730 1,570 1,390 1,730 1,570 1,390 1,730 1,570 1,390 4,000 2,980 4,000 2,980 4,240 3,160 4,240 3,160 1,730 1,390 4,240 3,350 2,370 4,240 3,350 2,370 4,000 2,980 4,000 2,980 4,240 3,350 2,370 4,240 3,350 2,370 4,470 4,470 1,390 1,390 1,390 1,300 1,390 1,300 1,390 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 mA at +45°C 100 kHz Reflow Temp ≤ 260°C °C T598/T599 Only1 Maximum Allowable Ripple Current MSL Maximum Operating Temp AEC–Q200 Qualified • • • • • • • • • • • • • • • • • • • • • • • (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert E = None or S = 10 cycles +25°C ±5°C. Designates surge current option. 1 T598 = AEC-Q200 qualified. T599 AEC-Q200 qualified 150°C and T591 = limited to 500 hours at 85°C/85% RH load. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 10 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size VDC at 105°C µF KEMET/EIA 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 20 20 20 25 25 25 25 35 35 35 35 35 35 35 35 35 35 47 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 220 220 220 220 220 220 47 47 100 100 150 150 47 68 68 22 33 33 47 2.2 2.2 2.2 2.2 3.3 3.3 3.3 3.3 4.7 4.7 B/3528-21 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 VDC at 105°C µF KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR µA at +25°C % at +25°C mΩ at +25°C Max/5 Minutes 120 Hz Max 100 kHz Max T591B476M010ATE070 T598D107M010ATE025 T598D107M010ATE040 T598D107M010ATE080 T591D107M010ATE025 T591D107M010ATE040 T591D107M010ATE080 T598V107M010ATE025 T598V107M010ATE045 T591V107M010ATE025 T591V107M010ATE045 T598D157M010ATE025 T598D157M010ATE045 T591D157M010ATE025 T591D157M010ATE045 T598V157M010ATE025 T598V157M010ATE045 T591V157M010ATE025 T591V157M010ATE045 T598D227M010ATE025 T598D227M010ATE040 T598D227M010ATE080 T591D227M010ATE025 T591D227M010ATE040 T591D227M010ATE080 T598D476M016ATE070 T591D476M016ATE070 T598D107M016ATE050 T591D107M016ATE050 T598D157M016ATE065 T591D157M016ATE065 T591D476M020ATE050 T591D686M020ATE040 T591D686M020ATE050 T591D226M025ATE060 T598D336M025ATE060 T591D336M025ATE060 T598D476M025ATE060 T598B225M035ATE150 T591B225M035ATE150 T598B225M035ATE200 T591B225M035ATE200 T598B335M035ATE150 T591B335M035ATE150 T598B335M035ATE200 T591B335M035ATE200 T598B475M035ATE200 T591B475M035ATE200 47 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 220 220 220 220 220 220 75.2 75.2 160 160 240 240 94 136 136 55 82.5 82.5 117.5 7.7 7.7 7.7 7.7 11.6 11.6 11.6 11.6 16.5 16.5 125°C 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 70 25 40 80 25 40 80 25 45 25 45 25 45 25 45 25 45 25 45 25 40 80 25 40 80 70 70 50 50 65 65 50 40 50 60 60 60 60 150 150 200 200 150 150 200 200 200 200 µA at +25°C % at +25°C mΩ at +25°C Max/5 Minutes 120 Hz Max 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current MSL Maximum Operating Temp AEC-Q200 Qualified (rms) mA at +45°C 100 kHz Reflow Temp ≤ 260°C °C T597/T598/T599 Only1 1,390 4,240 3,350 2,370 4,240 3,350 2,370 4,000 2,980 4,000 2,980 4,240 3,160 4,240 3,160 4,000 2,980 4,000 2,980 4,240 3,350 2,370 4,240 3,350 2,370 2,530 2,530 3,000 3,000 2,630 2,630 3,000 3,350 3,000 2,740 2,740 2,740 2,740 950 950 820 820 950 950 820 820 820 820 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 mA at +45°C 100 kHz Reflow Temp ≤ 260°C °C T598/T599 Only1 Maximum Allowable Ripple Current MSL Maximum Operating Temp AEC–Q200 Qualified • • • • • • • • • • • • • • • • • • • • • • (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert E = None or S = 10 cycles +25°C ±5°C. Designates surge current option. 1 T598 = AEC-Q200 qualified. T599 AEC-Q200 qualified 150°C and T591 = limited to 500 hours at 85°C/85% RH load. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 11 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size VDC at 105°C µF KEMET/EIA 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 50 10 10 10 10 15 22 33 33 33 1.5 1.5 2.2 2.2 2.2 2.2 10 10 D/7343-31 D/7343-31 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 D/7343-31 D/7343-31 T598D106M035ATE120 T591D106M035ATE120 T598V106M035ATE120 T591V106M035ATE120 T598D156M035ATE065 T598D226M035ATE065 T598D336M035ATE065 T591D336M035ATE065 T598X336M035ATE065 T598B155(1)050ATE200 T591B155(1)050ATE200 T598B225M050ATE150 T598B225M050ATE200 T591B225M050ATE150 T591B225M050ATE200 T598D106M050ATE090 T591D106M050ATE090 35 35 35 35 52.5 77 115.5 115.5 115.5 7.5 7.5 11 11 11 11 50 50 4 4 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 35 50 50 33 33 47 47 68 68 150 150 33 33 47 47 150 150 33 33 33 33 10 10 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 X/7343-43 D/7343-31 D/7343-31 T599B336M004ATE070 T599B336M004ATE090 T599B476M004ATE070 T599B476M004ATE090 T599B686M004ATE070 T599B686M004ATE090 T599D157M004ATE025 T599D157M004ATE045 T599B336M006ATE070 T599B336M006ATE090 T599B476M006ATE070 T599B476M006ATE090 T599D157M006ATE025 T599D157M006ATE045 T599B336M010ATE070 T599B336M010ATE090 T599B336M010ATE150 T599X336M035ATE065 T599D106M050ATE120 T599D106M050ATE150 13.2 13.2 18.8 18.8 27.2 27.2 60 60 20.8 20.8 29.6 29.6 94.5 94.5 33 33 33 115.5 50 50 VDC at 105°C µF KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF MSL Maximum Operating Temp AEC-Q200 Qualified (rms) mA at +45°C 100 kHz Reflow Temp ≤ 260°C °C T597/T598/T599 Only1 120 120 120 120 65 65 65 65 65 200 200 150 200 150 200 90 90 1,940 1,940 1,830 1,830 2,630 2,630 2,630 2,630 2,770 820 820 950 820 950 820 2,240 2,240 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 • 70 90 70 90 70 90 25 45 70 90 70 90 25 45 70 90 150 65 120 150 1,390 1,220 1,390 1,220 1,390 1,220 4,240 3,160 1,390 1,220 1,390 1,220 4,240 3,160 1,390 1,220 850 2,770 1,940 1,730 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 • • • • • • • • • • • • • • • • • • • • mA at +45°C 100 kHz Reflow Temp ≤ 260°C °C T598/T599 Only1 Maximum Allowable Ripple Current MSL Maximum Operating Temp AEC–Q200 Qualified ESR µA at +25°C % at +25°C mΩ at +25°C Max/5 Minutes 120 Hz Max 100 kHz Max 125°C 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 10 10 150°C 8 8 8 8 8 8 10 10 8 8 8 8 10 10 8 8 8 10 10 10 µA at +25°C % at +25°C mΩ at +25°C Max/5 Minutes 120 Hz Max 100 kHz Max KEMET Part Number DC Leakage DF Maximum Allowable Ripple Current ESR • • • • • • • • • (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert E = None or S = 10 cycles +25°C ±5°C. Designates surge current option. 1 T598 = AEC-Q200 qualified. T599 AEC-Q200 qualified 150°C and T591 = limited to 500 hours at 85°C/85% RH load. Refer to Ordering Information for additional detail. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 12 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size VDC at 105°C µF KEMET/EIA 2.5 6.3 6.3 6.3 6.3 6.3 10 100 22 33 33 47 47 22 S/3216-12 P/2012-10 S/3216-12 S/3216-12 S/3216-12 S/3216-12 S/3216-12 2.5 2.5 2.5 2.5 4 4 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 100 100 470 470 100 100 100 150 150 150 330 330 22 33 33 47 68 100 100 100 150 150 150 150 150 150 150 220 220 220 220 220 330 330 330 B/3528-21 B/3528-21 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 V/7343-20 V/7343-20 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 VDC at 105°C µF KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR µA at +25°C % at +25°C mΩ at +25°C Max/5 Minutes 120 Hz Max 100 kHz Max Maximum Allowable Ripple Current (rms) mA at +45°C 100 kHz MSL Maximum Operating Temp AEC-Q200 Qualified Reflow Temp ≤ 260°C °C T597/T598/T599 Only1 3 3 3 3 3 3 3 125 125 125 125 125 125 125 • • • • • • • 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • mA at +45°C 100 kHz Reflow Temp ≤ 260°C °C T598/T599 Only1 Maximum Allowable Ripple Current MSL Maximum Operating Temp AEC–Q200 Qualified Facedown Construction T597S107M2R5APE100 75 10 100 770 T597P226M006APE200 41.6 10 200 354 T597S336M006APE100 62.4 10 100 770 T597S336M006APE200 62.4 10 200 570 T597S476M006APE100 88.8 10 100 770 T597S476M006APE200 88.8 10 200 570 T597S226M010APE200 66 10 200 570 T598 Up-Screen with H termination and Surge Current Screening Option T598B107M2R5AH(2)055 25 8 55 1,570 T598B107M2R5AH(2)070 25 8 70 1,390 T598D477M2R5AH(2)006 117.5 10 6 8,660 T598D477M2R5AH(2)009 117.5 10 9 7,070 T598B107M004AH(2)045 40 8 45 1,730 T598B107M004AH(2)055 40 8 55 1,570 T598B107M004AH(2)070 40 8 70 1,390 T598B157M004AH(2)045 60 8 45 1,730 T598B157M004AH(2)055 60 8 55 1,570 T598B157M004AH(2)070 60 8 70 1,390 T598V337M004AH(2)025 132 10 25 4,000 T598V337M004AH(2)045 132 10 45 2,980 T598B226M006AH(2)070 13.9 8 70 1,390 T598B336M006AH(2)070 20.8 8 70 1,390 T598B336M006AH(2)080 20.8 8 80 1,300 T598B476M006AH(2)070 29.6 8 70 1,390 T598B686M006AH(2)070 43 8 70 1,390 T598B107M006AH(2)045 63 8 45 1,730 T598B107M006AH(2)055 63 8 55 1,570 T598B107M006AH(2)070 63 8 70 1,390 T598B157M006AH(2)045 94.5 8 45 1,730 T598B157M006AH(2)055 94.5 8 55 1,570 T598B157M006AH(2)070 94.5 8 70 1,390 T598V157M006AH(2)025 94.5 10 25 4,000 T598V157M006AH(2)045 94.5 10 45 2,980 T598D157M006AH(2)025 94.5 10 25 4,240 T598D157M006AH(2)045 94.5 10 45 3,160 T598D227M006AH(2)025 139 10 25 4,240 T598D227M006AH(2)040 139 10 40 3,350 T598D227M006AH(2)080 139 10 80 2,370 T598V227M006AH(2)025 139 10 25 4,000 T598V227M006AH(2)045 139 10 45 2,980 T598D337M006AH(2)025 207.9 10 25 4,240 T598D337M006AH(2)040 207.9 10 40 3,350 T598D337M006AH(2)080 207.9 10 80 2,370 µA at +25°C % at +25°C mΩ at +25°C Max/5 Minutes 120 Hz Max 100 kHz Max KEMET Part Number DC Leakage DF ESR (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert E = None or S = 10 cycles +25°C ±5°C. Designates surge current option. 1 T598 = AEC-Q200 qualified. T599 AEC-Q200 qualified 150°C and T591 = limited to 500 hours at 85°C/85% RH load. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 13 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size VDC at 105°C µF KEMET/EIA 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 16 16 25 25 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 22 33 33 47 100 100 100 100 100 150 150 150 150 220 220 220 47 100 150 33 47 2.2 2.2 3.3 3.3 4.7 10 10 15 22 33 33 1.5 2.2 2.2 10 B/3528-21 B/3528-21 B/3528-21 B/3528-21 D/7343-31 D/7343-31 D/7343-31 V/7343-20 V/7343-20 D/7343-31 D/7343-31 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 D/7343-31 V/7343-20 D/7343-31 D/7343-31 D/7343-31 X/7343-43 B/3528-21 B/3528-21 B/3528-21 D/7343-31 VDC at 105°C µF KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR µA at +25°C % at +25°C mΩ at +25°C Max/5 Minutes 120 Hz Max 100 kHz Max Maximum Allowable Ripple Current (rms) mA at +45°C 100 kHz MSL Maximum Operating Temp AEC-Q200 Qualified Reflow Temp ≤ 260°C °C T597/T598/T599 Only1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • mA at +45°C 100 kHz Reflow Temp ≤ 260°C °C T598/T599 Only1 Maximum Allowable Ripple Current MSL Maximum Operating Temp AEC–Q200 Qualified T598 Up-Screen with H termination and Surge Current Screening Option T598B226M010AH(2)070 22 8 70 1,390 T598B336M010AH(2)070 33 8 70 1,390 T598B336M010AH(2)080 33 8 80 1,300 T598B476M010AH(2)070 47 8 70 1,390 T598D107M010AH(2)025 100 10 25 4,240 T598D107M010AH(2)040 100 10 40 3,350 T598D107M010AH(2)080 100 10 80 2,370 T598V107M010AH(2)025 100 10 25 4,000 T598V107M010AH(2)045 100 10 45 2,980 T598D157M010AH(2)025 150 10 25 4,240 T598D157M010AH(2)045 150 10 45 3,160 T598V157M010AH(2)025 150 10 25 4,000 T598V157M010AH(2)045 150 10 45 2,980 T598D227M010AH(2)025 220 10 25 4,240 T598D227M010AH(2)040 220 10 40 3,350 T598D227M010AH(2)080 220 10 80 2,370 T598D476M016AH(2)070 75.2 10 70 2,530 T598D107M016AH(2)050 160 10 50 3,000 T598D157M016AH(2)065 240 10 65 2,630 T598D336M025AH(2)060 82.5 10 60 2,740 T598D476M025AH(2)060 117.5 10 60 2,740 T598B225M035AH(2)150 7.7 8 150 950 T598B225M035AH(2)200 7.7 8 200 820 T598B335M035AH(2)150 11.55 8 150 950 T598B335M035AH(2)200 11.6 8 200 820 T598B475M035AH(2)200 16.5 8 200 820 T598D106M035AH(2)120 35 10 120 1,940 T598V106M035AH(2)120 35 10 120 1,830 T598D156M035AH(2)065 52.5 10 65 2,630 T598D226M035AH(2)065 77 10 65 2,630 T598D336M035AH(2)065 115.5 10 65 2,630 T598X336M035AH(2)065 115.5 10 65 2,770 T598B155(1)050AH(2)200 7.5 8 200 820 T598B225M050AH(2)150 11 8 150 950 T598B225M050AH(2)200 11 8 200 820 T598D106M050AH(2)090 50 10 90 2,240 µA at +25°C % at +25°C mΩ at +25°C Max/5 Minutes 120 Hz Max 100 kHz Max KEMET Part Number DC Leakage DF ESR (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert E = None or S = 10 cycles +25°C ±5°C. Designates surge current option. 1 T598 = AEC-Q200 qualified. T599 AEC-Q200 qualified 150°C and T591 = limited to 500 hours at 85°C/85% RH load. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 14 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Derating Guidelines 125°C 150°C 100% 100% 95% Rated Voltage 95% Recommended Application Voltage VR ≤ 10 V 80% 75% 70% Recommended Application Voltage VR ≥ 16 V 65% 67% 60% 60% 55% 50% % Rated Voltage % Rated Voltage 85% Rated Voltage 90% 90% 54% −55 25 45 85 105 125 Temperature (˚C) 85% Recommended Application Voltage VR ≤ 10 V 80% 75% Recommended Application Voltage VR ≥ 16 V 70% 67% 65% 60% 60% 55% 50% 54% −55 25 45 85 105 125 150 Temperature (°C) Recommended Application Voltage KO-CAPs are solid state capacitors that demonstrate no wearout mechanism when operated within their recommended guidelines. While the KO-CAP can be operated at full rated voltage, most circuit designers seek a minimum level of assurance in long term reliability, which should be demonstrated with data. A voltage derating can provide the desired level of demonstrated reliability based on industry accepted acceleration models. Since most applications do require long term reliability, KEMET recommends that designers consider a voltage derating, according the graph above, for the maximum steady state voltage. Voltage Rating Maximum Recommended Steady State Voltage −55°C to 105°C 105°C to 125°C (T598) 105°C to 150°C (T599) 2.5 V ≤ VR ≤ 10 V 90% of VR 60% of VR 60% of VR VR ≥ 16 V 80% of VR 54% of VR 54% of VR VR = Rated voltage © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 15 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Maximum Operational Temperature 105°C 125°C *1 150°C Case Code EIA Case Code Maximum Power Dissipation (Pmax) mWatts at 45°C with +30°C Rise B D P S V X 3528-21 7343-31 2012-10 3216-12 7343-20 7343-43 135 450 25 60 400 500 Using the Pmax of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √Pmax/R E(max) = Z √Pmax/R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) Temperature Compensation Multipliers for Maximum Ripple Current −55°C < T ≤ 45°C 45°C < T ≤ 85°C 1.00 1.00 1.00 0.70 1.00 1.00 85°C < T ≤ 105°C 105°C < T ≤ 125°C 0.25 0.70 1.00 0.25 0.70 T ≤ 150°C* 125°C < T ≤ 150°C 0.25 T = Environmental temperature *1 = For T597 series please refer for the online specsheet for ripple current calculations at different temperatures The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 16 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Surge Voltage Surge voltage is the maximum voltage (peak value) which may be applied to the capacitor. The surge voltage must not be applied for periodic charging and discharging in course of normal operation and cannot be part of the application voltage. Surge voltage capability is demonstrated by application of 1,000 cycles at operating temperature. The parts are charged through a 33 Ohm resistor for 30 seconds and then discharged though a 33 Ohm resistor for each cycle. Rated Voltage (V) Surge Voltage (V) Category Voltage (V) –55°C to 105°C Category Surge Voltage (V) Category Voltage (V) up to 125°C Category Surge Voltage (V) up to 150°C* 2.5 6.3 10 16 20 3.3 8.2 13 20.8 26 1.7 4.2 6.7 10.7 13.4 2.2 5.5 8.7 13.9 17.4 1.7 4.2 6.7 10.7 13.4 2.2 5.5 8.7 13.9 17.4 25 35 50 32.5 45.5 65 16.8 23.5 33.5 21.8 30.5 43.6 16.8 23.5 33.5 21.8 30.5 43.6 *T599 Only Reverse Voltage Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. Temperature Permissible Transient Reverse Voltage 25°C 55°C 85°C 105°C 125°C* 150°C** 15% of rated voltage 10% of rated voltage 5% of rated voltage 3% of rated voltage 1% of rated voltage 1% of rated voltage *For series rated to 125°C ** For series rated to 150°C © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 17 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Table 2 – Land Dimensions/Courtyard T591 / T598 / T599 Metric Size Code KEMET Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 B D V X¹ 3528–21 7343–31 7343–21 7343–43 2.35 2.55 2.55 2.55 2.21 2.77 2.77 2.77 0.92 3.67 3.67 3.67 6.32 10.22 10.22 10.22 4.00 5.60 5.60 5.60 2.23 2.43 2.43 2.43 1.80 2.37 2.37 2.37 1.12 3.87 3.87 3.87 5.22 9.12 9.12 9.12 3.50 5.10 5.10 5.10 2.13 2.33 2.33 2.33 1.42 1.99 1.99 1.99 1.28 4.03 4.03 4.03 4.36 8.26 8.26 8.26 3.24 4.84 4.84 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W V2 W S Grid Placement Courtyard T597 KEMET Metric Size Code Dimensions (mm) Minimum – Maximum Case EIA G Z X Y I S P 3216–10 3216-12 2012–10 1.00 – 1.65 1.00 – 1.65 0.40 – 1.05 3.25 – 3.80 3.25 – 3.80 2.05 – 2.60 1.1 – 1.30 1.1 – 1.30 0.80 – 1.00 0.8 – 1.40 0.8 – 1.40 0.5 – 1.1 X X Y G Z Y © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 18 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Soldering Process Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. “Wiping” the edges of a chip and heating the top surface is not recommended. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100°C 150°C Temperature Maximum (TSmax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds Ramp-up Rate (TL to TP) 3°C/second maximum 3°C/second maximum Liquidous Temperature (TL) 183°C 217°C Time Above Liquidous (tL) 60 – 150 seconds 220°C* 235°C** 60 – 150 seconds 250°C* 260°C** 20 seconds maximum 30 seconds maximum 6°C/second maximum 6°C/second maximum 6 minutes maximum 8 minutes maximum Peak Temperature (TP) Time within 5°C of Maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) Time 25°C to Peak Temperature Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. * For Case Size height > 2.5 mm ** For Case Size height ≤ 2.5 mm TP TL Temperature KEMET’s families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp-up Rate = 3°C/second Maximum Ramp-down Rate = 6°C/second tL Tsmax Tsmin 25 ts 25°C to Peak Time Storage All KO-CAP capacitors are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC). These parts are classified as moisture sensitivity level 3 (MSL3) per IPC/JEDEC J-STD-020 and packaged per IPC/JEDEC J–STD–033, MSL3 specifies a floor time of 168 H at 30°C maximum temperature and 60% relative humidity. Unused capacitors should be sealed in a MBB with fresh desiccant. Calculated shelf life in sealed bag: – 12 months from bag seal date in a storage environment of < 40°C and humidity < 90% RH – 24 months from bag seal date in a storage environment of < 30°C and humidity < 70% RH If baking is required, refer to IPC/JEDEC J–STD–033 for bake procedure. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 19 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Construction T591 / T598 / T599 Polarity Stripe (+) Molded Epoxy Case Detailed Cross Section Silver Paint (Fourth Layer) Polarity Bevel (+) Wire Leadframe (− Cathode) Wire Weld (to attach wire) Carbon (Third Layer) Silver Adhesive Leadframe (+ Anode) Molded Epoxy Case Polymer (Second Layer) Ta2O5 Dielectric (First Layer) Tantalum T597 Polarity Stripe (+) Detailed Cross Section Carbon (Third Layer) Silver Paint (Fourth Layer) Molded Epoxy Case Wire Wire Spacer Leadframe (− Cathode) Silver Adhesive Weld (to attach wire) Polymer (Second Layer) Ta2O5 Dielectric (First Layer) Tantalum Leadframe (+ Anode) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 20 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Capacitor Marking T591/ T598 / T599 Date Code * Polarity Indicator (+) Picofarad Code KEMET ID Rated Voltage 1 digit = Last number of year 6 = 2016 7 = 2017 8 = 2018 9 = 2019 0 = 2020 2nd and 3rd digit = Week of the year 01 = 1st week of the year to 52 = 52nd week of the year st Date Code* * 822 = 14th week of 2018 T597 Voltage Code e j A 2.5 V 6.3 V 10 V Automotive Grade ID Date Code* Voltage and Capacitance Code Capacitance Code J7 N7 S7 A8 22 33 47 100 Date Code * * 008 = 6th week of 2020 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 1st digit = Last number of year 8 = 2018 9 = 2019 0 = 2020 2nd and 3rd digit = Week of the year 01 = 1st week of the year to 52 = 52nd week of the year T2073_T59X • 2/19/2021 21 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only (+) Embossed carrier (−) Embossment Top tape thickness 0.10 mm (0.004”) maximum thickness 180 mm (7.0”) or 330 mm (13.”) 8 mm (0.315”) or 12 mm (0.472”) Table 3 – Packaging Quantity Case Code KEMET P R I S A T M B U L C Q W Z V D Y X J H O EIA 2012-10 2012-12 3216-10 3216-12 3216-18 3528-12 3528-15 3528-21 6032-15 6032-19 6032-28 7343-12 7343-15 7343-17 7343-19 7343-31 7343-40 7343-43 7360-15 7360-20 7360-43 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 8 8 8 8 8 12 12 12 12 12 12 12 12 12 12 12 12 12 3,000 2,500 3,000 3,000 2,000 3,000 2,500 2,000 1,000 1,000 500 1,000 1,000 1,000 1,000 500 500 500 1,000 1,000 250 N/A 10,000 N/A N/A N/A 10,000 8,000 8,000 5,000 3,000 3,000 3,000 3,000 3,000 3,000 2,500 2,000 2,000 3,000 3,000 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 22 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Figure 1 – Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ØD0 P0 (10 pitches cumulative tolerance on tape ±0.2 mm) A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity B1 is for tape feeder reference only, including draft concentric about B0. Embossment For cavity size, see Note 1, Table 4 ØD1 Cover Tape User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size 8 mm 12 mm D1 Minimum Note 1 D0 1.5 +0.10/−0.0 (0.059 +0.004/−0.0) 1.0 (0.039) 1.5 (0.059) E1 P0 R Reference S1 Minimum T1 T Maximum Note 2 Note 3 Maximum P2 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) 25.0 (0.984) 30 (1.181) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 8 mm Single (4 mm) 4.35 (0.171) 6.25 (0.246) 12 mm Single (4 mm) and Double (8 mm) 8.2 (0.323) 10.25 (0.404) E2 Minimum F P1 3.5 ±0.05 2.0 ±0.05 or 4.0 ±0.10 (0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004) 2.0 ±0.05 (0.079 ±0.002) or 5.5 ±0.05 4.0 ±0.10 (0.157 ±0.004) or (0.217 ±0.002) 8.0 ±0.10 (0.315 ±0.004) T2 Maximum W Maximum A0, B0 & K0 2.5 (0.098) 8.3 (0.327) 4.6 (0.181) 12.3 (0.484) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 23 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Packaging Information Performance Notes 1. Cover tape break force: 1.0 kg minimum. 2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the cover tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8, 12 Bo Maximum Rotation ( 20 ° T) ° s Tape Maximum Width (mm) Rotation ( 8, 12 20 Typical Component Centerline ° S) Ao Figure 3 – Maximum Lateral Movement Figure 4 – Bending Radius 8 and 12 mm Tape 0.5 mm maximum 0.5 mm maximum Embossed Carrier Punched Carrier R © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Bending Radius R T2073_T59X • 2/19/2021 24 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Figure 5 – Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (Ø 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 ±0.20 (7.008 ±0.008) or 330 ±0.20 (13.000 ±0.008) 1.5 (0.059) 13.0 +0.5/−0.2 (0.521 +0.02/−0.008) 20.2 (0.795) 12 mm Variable Dimensions — Millimeters (Inches) Tape Size 8 mm 12 mm N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/−0.0 (0.331 +0.059/−0.0) 12.4 +2.0/−0.0 (0.488 +0.078/−0.0) 14.4 (0.567) 18.4 (0.724) Shall accommodate tape width without interference © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 25 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 and 12 mm only END Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum Leader 400 mm minimum Top Cover Tape Figure 7 – Maximum Camber Elongated Sprocket Holes (32 mm and wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 26 KEMET Organic Capacitor (KO-CAP ®) – Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2073_T59X • 2/19/2021 27
T591V107M010ATE045
物料型号: - T591 - T598 - T597 - T599

器件简介: KEMET Organic Capacitor (KO-CAP) 是一种具有导电聚合物阴极的固态电解电容器,能够在高频下提供极低的ESR(等效串联电阻)和改善的电容保持率。KO-CAP结合了多层陶瓷的低ESR、铝电解电容器的高电容和钽电容器的体积效率,集成为一个单一的表面贴装封装。

引脚分配: - 正极(阳极):通常标记为“A”或“+” - 负极(阴极):通常标记为“C”或“-”

参数特性: - 工作温度范围:-55°C 至 105°C/125°C/150°C - 额定电容范围:10-470 μF 在 120 Hz/25°C - 电容公差:K公差(10%),M公差(20%) - 额定电压范围:2.5-50V - ESR(100 kHz):请参考具体零件号的电气规格表 - 漏电流:在额定电压下5分钟后,T597 ≤ 0.3 CV(A),其他型号 ≤ 0.1 CV(A)

功能详解: KO-CAP电容器适用于多种市场领域的去耦和滤波,特别强调在汽车应用中,如信息娱乐、ADAS、底盘与安全以及动力传动系统,这些应用对高湿度和温度等恶劣条件有较高要求。

应用信息: - 汽车级应用,特别是高湿度和高温度环境 - 符合AEC-Q200资格测试计划 - TS 16949认证的工厂生产 - 遵守PPAP/PSW和变更控制

封装信息: - 符合EIA标准535BAAC - 带和卷标准包装,符合EIA 481 - 无卤环氧树脂,符合RoHS
T591V107M010ATE045 价格&库存

很抱歉,暂时无法提供与“T591V107M010ATE045”相匹配的价格&库存,您可以联系我们找货

免费人工找货