VG1210S020R014

Surface Mount Varistors VG ESD Suppression 125°C Overview Applications KEMET's VG series of varistors are designed to suppress ESD events, including those specified in IEC 1000-4-2 or other standards used for Electromagnetic Compliance testing. VG varistors are typically applied to protect integrated circuits and other components at the circuit board level operating at 18 VDC or less. Typical applications include the protection of components and circuits sensitive to ESD transients occurring on power supply, control and signal lines in mobile communication, computer/EDP products, medical products, hand held/ portable devices, industrial equipment, including diagnostic port protection and I/O interfaces. The manufacturing method, design and materials of these devices result in capacitance characteristics suitable for high frequency attenuation/low-pass filter circuit functions, providing suppression and filtering in a single device. Suppression of ESD events as specified in IEC 1000-4-2, MILSTD 883C, method 3015.7 or AEC-Q200-002 for Electromagnetic Compliance (EMC). Benefits • AEC–Q200 qualified Grade 1 • Surface mount form factor • Operating ambient temperature of −55°C to +125°C • Operating voltage range of up to 18 VDC • Available cases sizes: 0603, 0805, 1206, 1210 • Short response time • Characterized for inductance and capacitance • Dimensional and weight savings on the board • Non-sensitive to mildly activated fluxes • Barrier type end terminations solderable with Pb-free solders according to JEDEC J–STD–020C and IEC 60068–2–58 • Non-plastic coating guarantees improved flammability rating • Available in tape and reel for automatic pick and place • RoHS 2 2011/65/EC, REACH compliant Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com V0004_VG • 5/1/2019 1 Surface Mount Varistors VG ESD Suppression 125°C Ordering Information VG 0603 S 020 R 014 Series Chip Size Code Tolerances Rated Peak Single Pulse Transient Current (A) Packaging/ Termination Maximum Continuous Working Voltage (Vrms AC) S = Special 020 = 2 Amps R = Reel 180 mm/Ni Sn Barrier Terminations 014 = 14 Varistor SMD 125°C ESD Suppression Multilayer Chip 0603 = 0603 0805 = 0805 1206 = 1206 1210 = 1210 (First two digits represent significant figures. Third digit specifies number of zeros.) Dimensions – Millimeters 0.5±0.25 W t L Size Code L W tmax 0603 1.6±0.20 0.80±0.10 0.95 0805 2.0±0.25 1.25±0.20 0.95 1206 1210 3.2±0.30 3.2±0.30 1.60±0.20 2.50±0.25 1.20 1.30 Environmental Compliance RoHS 2 2011/65/EC, REACH © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com V0004_VG • 5/1/2019 2 Surface Mount Varistors VG ESD Suppression 125°C Performance Characteristics Continuous Units Value DC Voltage Range (Vdc) V 18 AC Voltage Range (Vrms) V 14 Non-Repetitive Surge Current, 8/20 µs Waveform (Imax) A 20 – 30 Non-Repetitive Surge Energy, 10/1,000 µs Waveform (Wmax) J 0.05 – 0.1 Operating Ambient Temperature °C −55 to +125 Storage Temperature Range (mounted components) °C −55 to +150 %/°C < +0.05 ns