Z0805C101APMST

Ferrite Beads Power Line Multilayer Ferrite Chip Beads Z-PMS Overview Applications KEMET Z-PMS Power Line Multilayer Ferrite Chip Beads are ideal for high frequency noise countermeasures on the DC power supply line. • PC, tablet, peripherals • Differential transmission line on USB and IEEE1394 interface • Mobile and portable equipment The small size of this ferrite bead makes it suitable for mobile equipement that requires tight space both in dimension and in height. The unique green sheet and printing technologies realize low RDC which leads to lower power consumption and longer battery life. Using three different type of materials enables to further specialize the function and characteristics of the chip bead: 1) Material “A” for broadband noise suppression. Low R-XL frequency cross point and large resistance part work as damping function, suppress unnecessary resonance and keep signal integrity. 2) Material “B” for noise suppression above 20 MHz, with increased attenuation. For general use especially efficient for video signal lines. Benefits • Miniature and low profile • Reduced power dissipation due to low RDC values • No grounding needed for flexible circuit design • Prevents interference between circuits in mobile systems • Impedance value from 10 – 390 Ω • Rated current range from 0.8 – 4 A • Operating temperature range from –55°C to +85°C Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com FB0003_Z-PMS • 1/27/2021 1 Ferrite Beads Power Line Multilayer Ferrite Chip Beads Z-PMS Part Number System Z 0402 C 221 A PMS T Ferrite Bead EIA Case Size (L" x W") Specification Impedance Value (Ω) at 100 MHz Material Series Packaging C = Commercial The first two digits represent the impedance value. The third digit inidcates the number of zeros to be added. A = for broadband noise suppression B = for noise suppression above 20 MHz, with increased attenuation PMS = Power Line Multilayer Ferrite Chip Beads T = Tape & Reel 0402 (1005 in mm) 0603 (1608 in mm) 0805 (2012 in mm) Examples: 800 = 80 Ω 101 = 100 Ω 221 = 220 Ω Dimensions – Millimeters (Inches) Dimensions - Millimeters (Inches) Land Pattern - Millimeters W Land Pattern L Solder-resist Chip Inductor T C B B A B EIA Size Code Metric Size Code L Length W Width T Thickness B Bandwidth A B C 0402 1005 1.00 (0.039) ±0.05 (0.002) 0.50 (0.020) ±0.05 (0.002) 0.50 (0.020) ±0.05 (0.002) 0.25 (0.010) ±0.10 (0.004) 0.45 ~ 0.55 0.40 ~ 0.50 0.45 ~ 0.55 0630 1608 1.60 (0.063) ±0.15 (0.006) 0.80 (0.031) ±0.15 (0.006) 0.80 (0.031) ±0.15 (0.006) 0.30 (0.012) ±0.20 (0.008) 0.80 ~ 1.00 0.60 ~ 0.80 0.60 ~ 0.80 0805 2012 2.00 (0.079) +0.30/−0.10 (+0.012/−0.004) 1.25 (0.049) ±0.20 (0.008) 0.85 (0.033) ±0.2 (0.008) 0.50 (0.020) ±0.30 (0.012) 0.80 ~ 1.20 0.80 ~ 1.20 0.90 ~ 1.60 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com FB0003_Z-PMS • 1/27/2021 2 Ferrite Beads Power Line Multilayer Ferrite Chip Beads Z-PMS Performance Characteristics Item Performance Characteristics Impedance Range Impedance Tolerance Rated Current Range Rated DC Resistance Range Operating Temperature Range 10 – 390 Ω, at 100 MHz ±25% 0.8 – 4 A maximum 0.02 – 0.20 Ω maximum −55°C to +85°C (includes self temperature rise) Environmental Compliance All KEMET Ferrite Beads are RoHS and REACH Compliant. Table 1 – Ratings & Part Number Reference  Part Number Impedance (Ω) at 100 MHz Impedance Tolerance Rated Current (A) Maximum DC Resistance (Ω) Maximum Z0402C100APMST 10 ±25% 2.0 0.030 Z0402C330APMST 33 ±25% 1.7 0.050 0.075 Z0402C680APMST 68 ±25% 1.5 Z0402C121APMST 120 ±25% 1.0 0.140 Z0402C221APMST 220 ±25% 0.8 0.200 Z0402C121BPMST 120 ±25% 1.1 0.120 Z0402C221BPMST 220 ±25% 0.9 0.180 Z0603C330APMST 33 ±25% 3.0 0.025 Z0603C600APMST 60 ±25% 2.5 0.040 Z0603C101APMST 100 ±25% 1.7 0.050 Z0603C121APMST 120 ±25% 2.7 0.035 Z0603C181APMST 180 ±25% 1.5 0.075 Z0603C271APMST 270 ±25% 1.2 0.110 Z0603C391APMST 390 ±25% 1.0 0.140 0.020 Z0805C330APMST 33 ±25% 4.0 Z0805C600APMST 60 ±25% 3.0 0.025 Z0805C101APMST 100 ±25% 2.5 0.040 Z0805C221APMST 220 ±25% 2.0 0.050 Z0805C331APMST 330 ±25% 1.5 0.075 Part Number Impedance Impedance Tolerance Rated Current DC Resistance © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com FB0003_Z-PMS • 1/27/2021 3 Ferrite Beads Power Line Multilayer Ferrite Chip Beads Z-PMS Frequency Characteristics Z0402C100APMST 16 14 30 10 8 6 4 20 15 5 1 10 100 Frequency (MHz) 1,000 0 10,000 Z0402C680APMST 100 90 70 120 Impedance(Ω) 40 30 20 0 10,000 Z0402C221APMST 300 1,000 10,000 1,000 10,000 60 10 1,000 10,000 80 40 100 Frequency (MHz) 1,000 100 20 10 100 Frequency (MHz) Z R X 140 50 1 10 Z0402C121APMST 160 60 0 1 180 Z R X 80 Impedance(Ω) 25 10 2 0 Z R X 35 Impedance(Ω) Impedance(Ω) 40 Z R X 12 Z0402C330APMST 45 1 10 100 Frequency (MHz) Z0402C121BPMST 220 200 Z R X 250 160 Impedance(Ω) Impedance(Ω) 200 Z R X 180 150 100 140 120 100 80 60 40 50 20 0 1 10 100 Frequency (MHz) 1,000 10,000 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 0 1 10 100 Frequency (MHz) FB0003_Z-PMS • 1/27/2021 4 Ferrite Beads Power Line Multilayer Ferrite Chip Beads Z-PMS Frequency Characteristics cont. Z0402C221BPMST 350 300 200 150 100 1 10 1,000 1 10 120 Impedance(Ω) 40 30 1,000 10,000 1,000 10,000 1,000 10,000 Z R X 100 50 100 Frequency (MHz) Z0603C101APMST 140 80 60 40 20 20 10 1 10 100 Frequency (MHz) 1,000 0 10,000 Z0603C121APMST 160 1 10 100 Frequency (MHz) Z0603C181APMST 220 200 140 Z R X 120 Z R X 180 160 100 Impedance(Ω) Impedance(Ω) 15 0 10,000 Z R X 60 Impedance(Ω) 100 Frequency (MHz) Z0603C600APMST 70 80 60 140 120 100 80 60 40 40 20 0 20 5 80 0 25 10 50 0 Z R X 30 Impedance(Ω) Impedance(Ω) 35 Z R X 250 Z0603C330APMST 40 20 1 10 100 Frequency (MHz) 1,000 10,000 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 0 1 10 100 Frequency (MHz) FB0003_Z-PMS • 1/27/2021 5 Ferrite Beads Power Line Multilayer Ferrite Chip Beads Z-PMS Frequency Characteristics cont. Z0603C271APMST 350 300 350 200 150 1 10 1,000 0 10,000 10 20 15 1,000 10,000 1,000 10,000 1,000 10,000 Z R X 60 25 100 Frequency (MHz) Z0805C600APMST 70 Impedance(Ω) 30 1 80 Z R X 35 Impedance(Ω) 100 Frequency (MHz) Z0805C330APMST 40 50 40 30 20 10 10 5 1 10 100 Frequency (MHz) 1,000 0 10,000 Z0805C101APMST 120 10 60 40 100 Frequency (MHz) Z0805C221APMST Z R X 200 Impedance(Ω) 80 1 250 Z R X 100 Impedance(Ω) 200 50 45 150 100 50 20 0 250 100 50 0 300 150 100 0 Z R X 400 Impedance(Ω) Impedance(Ω) 450 Z R X 250 Z0603C391APMST 500 1 10 100 Frequency (MHz) 1,000 10,000 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 0 1 10 100 Frequency (MHz) FB0003_Z-PMS • 1/27/2021 6 Ferrite Beads Power Line Multilayer Ferrite Chip Beads Z-PMS Frequency Characteristics cont. Z0805C331APMST 400 350 Z R X Impedance(Ω) 300 250 200 150 100 50 0 1 10 100 Frequency (MHz) 1,000 10,000 Taping Specifications - Millimeters (Inches) Paper Tape 8mm Width A B T 8.0±0.3 (0.315±0.012) 1.75±0.1 (0.069±0.004) 3.5±0.05 (0.138±0.002) Ø1.5±0.1/−0 (Ø0.059±0.004/−0) Sprocket Hole P 2.0±0.05 (0.079±0.002) 4.0±0.1 (0.157±0.004) EIA Case Size Metric Case Size Height Reel Quantity 0402 1005 0.50 10,000 0630 1608 0.80 4,000 0805 2012 0.85 4,000   Cavity Pitch Thickness A B P T Nominal 0.65 1.15 2.0 0.8 Tolerance ±0.1 ±0.1 ±0.05 Maximum Nominal 1.0 1.8 4.0 1.1 Tolerance ±0.2 ±0.2 ±0.1 Maximum Nominal 1.5 2.3 4.0 1.1 Tolerance ±0.2 ±0.2 ±0.1 Maximum © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com FB0003_Z-PMS • 1/27/2021 7 Ferrite Beads Power Line Multilayer Ferrite Chip Beads Z-PMS Reel Specifications - Millimeters t E C B D R A W Dimensions - Millimeters EIA Size Code 0402 0630 0805 A B C D E Nominal ø178.0 ø60.0 ø13.0 ø21.0 2.0 Tolerance ±2.0 Minimum ±0.2 ±0.8 ±0.5 R 1.0 t W 2.5 10.0 Maximum ±1.5 Recommended Reflow Soldering Profile Temperature 300°C Peak 260°C maximum 10 seconds maximum 200°C Heating above 230°C 40 seconds maximum 100°C Preheating 150°C 60 seconds minimum 0°C Time © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com FB0003_Z-PMS • 1/27/2021 8 Ferrite Beads Power Line Multilayer Ferrite Chip Beads Z-PMS Handling Precautions Ferrite chip beads should be stored in normal working environments. While these beads themselves are quite robust in other environments, exposure to high temperatures, high humidity, corrosive atmospheres, and long-term storage degrades solderability. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine-bearing and sulfur-bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. For optimized solderability, ferrite chip beads stock should be used promptly, preferably within six months of receipt.” © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com FB0003_Z-PMS • 1/27/2021 9 Ferrite Beads Power Line Multilayer Ferrite Chip Beads Z-PMS KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com FB0003_Z-PMS • 1/27/2021 10