BCW89

SMD S MD Type PNP General Purpose Transistors BCW89 SOT-23 +0.1 2.9-0.1 +0.1 0.4-0.1 Transistors IC Unit: mm Features +0.1 2.4-0.1 1 +0.1 0.95-0.1 +0.1 1.9-0.1 2 0.55 Low voltage (max. 60 V). +0.1 1.3-0.1 Low current (max. 100 mA). 0.4 3 +0.05 0.1-0.01 +0.1 0.97-0.1 1.Base 2.Emitter 3.collector Absolute Maximum Ratings Ta = 25 Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Peak collector current Peak base current Total power dissipation Storage temperature Junction temperature Operating ambient temperature Thermal resistance from junction to ambient * * Transistor mounted on an FR4 printed-circuit board. Symbol VCBO VCEO VEBO IC ICM IBM Ptot Tstg Tj Ramb Rth j-a Rating -80 -60 -5 -100 -200 -200 250 -65 to +150 150 -65 to +150 500 K/W Unit V V V mA mA mA mW +0.1 0.38-0.1 0-0.1 www.kexin.com.cn 1 SMD Type BCW89 Electrical Characteristics Ta = 25 Parameter Collector cutoff current Emitter cutoff current DC current gain Symbol ICBO ICBO IEBO hFE Testconditons IE = 0; VCB = -20 V IE = 0; VCB = -20 V; Tj = 100 IC = 0; VEB = -5 V IC = -10 ìA; VCE = -5 V IC = -2 mA; VCE = -5 V Collector-emitter saturation voltage VCE(sat) IC = -10 mA; IB = -0.5 mA IC = -50 mA; IB = -2.5 mA Base to emitter saturation voltage Base to emitter voltage Collector capacitance Transition frequency Noise figure VBE(sat) VBE CC fT NF IC = -10 mA; IB = -0.5 mA IC = -50 mA; IB = -2.5 mA IC = -2 mA; VCE = -5 V IE = ie = 0; VCB = -10 V; f = 1 MHz IC = -10 mA; VCE = -5 V; f = 100 MHz IC = -200 ìA; VCE = -5 V; RS = 2 kÙ; f = 1 kHz; B = 200 Hz 100 -600 120 Min Transistors IC Typ Max -100 -10 -100 Unit nA ìA nA 90 260 -80 -150 -720 -810 -750 4.5 -300 mV mV mV mV mV pF MHz 10 dB Marking Marking H3 2 www.kexin.com.cn