AA1010ZG10ZC

XPower PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA1010ZG10ZC Green Features PLCC-4 PACKAGE. SINGLE COLOR. HIGH LUMINANCE. HIGH POWER,OPERATING CURRENT @350mA. SUITABLE FOR ALL SMT ASSEMBLY METHODS. PACKAGE : 500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. PATENT PENDING. RoHS COMPLIANT. Description The LED is encapsulated with a soft silicone material. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAI0906 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2008 DRAWN: Y.F.Lu PAGE: 1 OF 6 ERP: 1201003391 Applications t raffic signaling. b acklighting (illuminated advertising , general lighting). i nterior and exterior automotive lighting. s ubstitution of micro incandescent lamps. p ortable light source (e.g. bicycle flashlight). s ignal and symbol luminaire for orientation. m arker lights (e.g. steps, exit ways, etc). d ecorative and entertainment lighting. i ndoor and outdoor commercial and residential architectural lighting. Application Notes Pressure or stress can damage the encapsulating material and affect the reliability of the LED. Precaution should be taken to avoid pressure on the LED encapsulating surface. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. H andling Indications Use proper handling techniques to prevent damage to the LED surface. Minimize mechanical stress on the LED surface during processing and handling. Do not touch the emitting surface with sharp objects to avoid scratching or damaging the LED. Figure 1 In general, LEDs should be handled by the sides of the package. Handling instruments should not touch the emitting surface of the LED package. Figure 2 For automated pick-and-place machines, the pickup nozzle should be larger than the size of the LED reflector area to avoid placing excess pressure on the LED surface. SPEC NO: DSAI0906 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2008 DRAWN: Y.F.Lu PAGE: 2 OF 6 ERP: 1201003391 S election Guide Part No. Dice Lens Type luminous Intensity [2] Iv (cd)@ 350 mA Min. AA1010ZG10ZC Green (AlInGaN) WATER CLEAR 12 Typ. 20 Φv (lm) [2] @ 350 mA Min. 39 Typ. 65 Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation Junction temperature Operating Temperature Storage Temperature DC Forward Current [1] Peak Forward Current [2] Thermal resistance [1] Symbol Pt TJ Top Tstg IF IFM Rth Value 1.2 110 -40 To +100 -40 To +100 350 500 9 Unit W °C °C °C mA mA °C/W Notes: 1.Results from mounting on PC board FR4(pad size ≥ 100mm 2 p er pad), mounted o n pc board-metal core PCB i s r ecommend f or lowest thermal Resistance. 2.1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics at TA=25°C Parameter Wavelength at peak emission IF=350mA [Typ.] Dominant Wavelength IF=350mA [Typ.] Symbol λpeak λdom [1] Δλ Value 520 530 35 2.7 VF [2] 3.3 3.8 TCλpeak 0.16 nm/ °C nm/ °C mV/ °C V Unit nm nm nm Spectral bandwidth at 50%ΦREL MAX IF=350mA [Typ.] Forward Voltage IF=350mA [Min.] Forward Voltage IF=350mA [Typ.] Forward Voltage IF=350mA [Max.] Temperature coefficient of λpeak IF=350mA, -10°C≤ T≤100°C [Typ.] Temperature coefficient of λdom IF=350mA, -10°C≤ T≤100°C [Typ.] Temperature coefficient of VF IF=350mA, -10°C≤ T≤100°C [Typ.] Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. TCλdom 0.14 TCV -2.26 SPEC NO: DSAI0906 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2008 DRAWN: Y.F.Lu PAGE: 3 OF 6 ERP: 1201003391 AA1010ZG10ZC SPEC NO: DSAI0906 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2008 DRAWN: Y.F.Lu PAGE: 4 OF 6 ERP: 1201003391 AA1010ZG10ZC Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Reel Dimension T ape Specifications (Units : mm) SPEC NO: DSAI0906 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2008 DRAWN: Y.F.Lu PAGE: 5 OF 6 ERP: 1201003391 yalin 數位簽署者：yalin DN：cn=yalin, o, ou, email=sjhou@cn. kingbright.com, c=< 無> 日期︰2008.01.30 15:10:56 +08'00' PACKING & LABEL SPECIFICATIONS AA1010ZG10ZC SPEC NO: DSAI0906 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2008 DRAWN: Y.F.Lu PAGE: 6 OF 6 ERP: 1201003391