AA2734ESGC

2.7x3.4mm SURFACE MOUNT LED LAMP AA2734ESGC HIGH EFFICIENCY RED SUPER BRIGHT GREEN Features z z z z z z z Description The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. 2.7mm X 3.4mm SMT LED, 1.5mm HEIGHT ONLY. BOTH CHIPS CAN BE CONTROLLED SEPARATELY. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE: 1000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAD1240 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAY/04/2005 DRAWN: S.H.CHEN PAGE: 1 OF 5 ERP: 1201000048 Selection Guid e Part No. Dice Lens Type Iv (mcd) @ 20mA Min. HIGH EFFICIENCY RED (GaAsP/GaP) AA2734ESGC SUPER BRIGHT GREEN (Gap) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Viewing Angle 2θ1/2 120° Typ. 30 30 7 WATER CLEAR 7 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device High Efficiency Red Super Bright Green High Efficiency Red Super Bright Green High Efficiency Red Super Bright Green High Efficiency Red Super Bright Green High Efficiency Red Super Bright Green All Typ. 627 565 625 568 45 30 15 15 2.0 2.2 2.5 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. High Efficiency Red 105 30 160 5 Super Bright Green 105 25 140 Units mW mA mA V -40°C To +85°C SPEC NO: DSAD1240 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAY/04/2005 DRAWN: S.H.CHEN PAGE: 2 OF 5 ERP: 1201000048 AA2734ESGC High Efficiency Red SPEC NO: DSAD1240 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAY/04/2005 DRAWN: S.H.CHEN PAGE: 3 OF 5 ERP: 1201000048 Super Bright Green SPEC NO: DSAD1240 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAY/04/2005 DRAWN: S.H.CHEN PAGE: 4 OF 5 ERP: 1201000048 AA2734ESGC Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1240 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAY/04/2005 DRAWN: S.H.CHEN PAGE: 5 OF 5 ERP: 1201000048