AA2734SRSG

2.7x3.4mm SURFACE MOUNT LED LAMP AA2734SRSGC SUPER BRIGHT RED SUPER BRIGHT GREEN Features l 2.7mm l BOTH l SUITABLE CHIPS CAN BE CONTROLLED SEPARATELY. FOR ALL SMT ASSEMBLY AND SOLDER ON TAPE AND REEL. X 3.4mm SMT LED, 1.5mm HEIGHT ONLY. Description Diode. The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting The Super Bright Green source color devices are Diode. l AVAILABLE l IDEAL l PACKAGE: PROCESS. FOR BACKLIGHTING. made with Gallium Phosphide Green Light Emitting 1000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: DSAD1241 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE: MAR/28/2003 DRAWN: D.H.FANG PAGE: 1 OF 4 Selection Guide P ar t N o . AA2734SRSGC Dic e SUPER BRIGHT RED (GaAlAs) L en s Ty p e WATER C LEAR Mi n . 36 7 Iv (m c d ) @ 20 m A Ty p . 150 30 V i ew i n g An g le 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. SUPER BRIGHT GREEN (GaP) Electrical / Optical Characteristics at TA=25°C Sy m b o l λp e a k λD ∆λ1/2 C VF IR P ar am et er Peak Wavelength D omi nate Wavelength Super Bri ght Red Super Bri ght Green D ev i c e Ty p . 660 565 20 30 Max . Un its nm nm nm pF V uA Tes t C o n d i t i o n s I F =20mA I F =20mA I F =20mA VF=0V;f=1MHz I F =20mA V R = 5V Spectral Li ne Half-wi dth Super Bri ght Red Super Bri ght Green C apaci tance Super Bri ght Red Super Bri ght Green Super Bri ght Red Super Bri ght Green 640 568 45 15 Forward Voltage Reverse C urrent Super Bri ght Red Super Bri ght Green All 1.85 2.2 2.5 2.5 10 Absolute Maximum Ratings at TA=25°C P ar am et er Power di ssi pati on S u p er B r i g h t R ed 100 155 30 Su p er B r i g h t Gr een 105 140 25 Un its mW mA V mA Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Operati ng/Storage Temperature Reverse Voltage Peak Forward C urrent [1] D C Forward C urrent -40°C To +85°C 5 SPEC NO: DSAD1241 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE: MAR/28/2003 DRAWN: D.H.FANG PAGE: 2 OF 4 Super Bright Red / Super Bright Green AA2734SRSGC SPEC NO: DSAD1241 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE: MAR/28/2003 DRAWN: D.H.FANG PAGE: 3 OF 4 AA2734SRSGC SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1241 APPROVED : J. Lu REV NO: V.1 CHECKED :Allen Liu DATE: MAR/28/2003 DRAWN: D.H.FANG PAGE: 4 OF 4