AA2810ASYSK

2.8X0.8mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: AA2810ASYSK Super Bright Yellow Features 2.8mmX0.8mm right angle SMT LED, 1.2mm thickness. Low power consumption. Ideal for backlight and indicator. Various colors and lens types available. Package : 2000pcs / reel. Moisture sensitivity level : level 3. RoHS compliant. Description The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.0039") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK2446 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/19/2009 DRAWN: S.P.Chen PAGE: 1 OF 6 ERP: 1201005914 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. SPEC NO: DSAK2446 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/19/2009 DRAWN: S.P.Chen PAGE: 2 OF 6 ERP: 1201005914 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. AA2810ASYSK Super Bright Yellow (AlGaInP) WATER CLEAR 110 Typ. 200 Viewing Angle [1] 2θ1/2 110° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Typ. 590 590 20 20 2 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Yellow 75 30 175 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAK2446 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/19/2009 DRAWN: S.P.Chen PAGE: 3 OF 6 ERP: 1201005914 Super Bright Yellow AA2810ASYSK SPEC NO: DSAK2446 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/19/2009 DRAWN: S.P.Chen PAGE: 4 OF 6 ERP: 1201005914 AA2810ASYSK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAK2446 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/19/2009 DRAWN: S.P.Chen PAGE: 5 OF 6 ERP: 1201005914 PACKING & LABEL SPECIFICATIONS AA2810ASYSK SPEC NO: DSAK2446 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/19/2009 DRAWN: S.P.Chen PAGE: 6 OF 6 ERP: 1201005914