AA2810RWS

2.8X1.0mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION O BSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA2810RWS/Z WHITE Description The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Features 2.8mmX1.0mm RIGHT ANGLE SMT LED, 1.2mm THICKNESS. LOW POWER CONSUMPTION. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. TYP. COLOR TEMPERATURE:6500K COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). OPTICAL EFFICIENCY:53.1 lm/W(TYP.) COLOR REPRODUCTION INDEX:80 MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Applications t raffic signaling. b acklighting (illuminated advertising , general lighting). i nterior and exterior automotive lighting. s ubstitution of micro incandescent lamps. R eading camps. s ignal and symbol luminaire for orientation. m arker lights (e.g. steps, exit ways, etc). d ecorative and entertainment lighting. i ndoor and outdoor commercial and residential architectural lighting. P ackage Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.0039") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4500 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: S.J.LIU PAGE: 1 OF 8 ERP: 1201002975 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. SPEC NO: DSAH4500 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: S.J.LIU PAGE: 2 OF 8 ERP: 1201002975 S election Guide Part No. Dice Lens Type luminous Intensity Iv(mcd) @ 20 mA Min. AA2810RWS/Z WHITE (InGaN) WATER CLEAR 650 Typ. 1200 Note2 Φv (mlm) @ 20 mA Min. 1500 Note3 Viewing Note1 Angle 2θ1/2 120° Typ. 3400 Absolute Maximum Ratings at TA=25°C Parameter Power dissipation Reverse Voltage Junction temperature Operating Temperature Storage Temperature DC Forward Current Peak Forward Current Thermal resistance Note5 Junction/ambient Junction/solder point Note4 Symbol Pt VR TJ Top Tstg IF IFM Rth JA Rth JS Value 111 5 110 -40 To +85 -40 To +100 30 100 300 140 Unit mW V °C °C °C mA mA °C/W °C/W N otes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 p er pad), Electrical / Optical Characteristics at TA=25°C Parameter Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage IF=20mA [Max.] [Typ.] IR Reverse Current (VR=5V) [Max.] TC x 10 -0.1 10-3 / °C 10-3 / °C mV/ °C Temperature coefficient of x IF=20mA, -10°C≤ T≤ 100°C [Typ.] Temperature coefficient of y IF=20mA, -10°C≤ T≤ 100°C [Typ.] Temperature coefficient of VF IF=20mA, -10°C≤ T≤ 100°C [Typ.] VF Note2 Symbol X Y Note1 Value 0.31 0.31 2.7 3.2 3.7 0.01 Unit - Note1 V Reverse Current (VR=5V) μA TCy -0.2 TCV -2.5 N otes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAH4500 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: S.J.LIU PAGE: 3 OF 8 ERP: 1201002975 B rightness codes luminous Intensity Iv(mcd) @ 20 mA Code. T U V Min. 650 900 1200 Note1 Φv (mlm) @ 20 mA Max. 1200 1500 1800 Typ. 3300 3450 3600 Note2 N otes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White AA2810RWS/Z SPEC NO: DSAH4500 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: S.J.LIU PAGE: 4 OF 8 ERP: 1201002975 AA2810RWS/Z SPEC NO: DSAH4500 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: S.J.LIU PAGE: 5 OF 8 ERP: 1201002975 AA2810RWS/Z White CIE 0.44 0.42 0.40 c1 0.38 0.36 0.34 b4 b3 b1 b2 a1 a0 c0 0.32 0.30 0.28 0.26 0.24 0.22 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 a0 X Y 0.264 0.267 0.283 0.305 0.296 0.276 0.280 0.248 X Y 0.248 0.286 a1 0.275 0.321 0.283 0.305 0.264 0.267 Reference CCT: 14000~9000k b1 X Y 0.283 0.305 0.330 0.360 0.330 0.339 0.287 0.295 X Y Reference CCT: 14000~9000k b2 0.287 0.295 0.330 0.339 0.330 0.318 0.296 0.276 Reference CCT: 9000~5600k b3 X Y 0.275 0.321 0.298 0.350 0.306 0.332 0.283 0.305 X Y Reference CCT: 9000~5600k b4 0.298 0.350 0.321 0.379 0.330 0.360 0.306 0.332 Reference CCT: 9000~7000k c0 X Y 0.330 0.360 0.361 0.385 0.356 0.351 0.330 0.318 X Y Reference CCT: 7600~5600k c1 0.321 0.379 0.366 0.419 0.361 0.385 0.330 0.360 Reference CCT: 5600~4600k Reference CCT: 6000~4600k SPEC NO: DSAH4500 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: S.J.LIU PAGE: 6 OF 8 ERP: 1201002975 AA2810RWS/Z R ecommended Soldering Pattern (Units : mm; Tolerance: ±0.1) T ape Specifications (Units : mm) Reel Dimension SPEC NO: DSAH4500 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: S.J.LIU PAGE: 7 OF 8 ERP: 1201002975 PACKING & LABEL SPECIFICATIONS AA2810RWS/Z AA2810XXX SPEC NO: DSAH4500 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: S.J.LIU PAGE: 8 OF 8 ERP: 1201002975