AA3020AEC

3.0x2.0mm SURFACE MOUNT LED LAMP Part Number: AA3020AEC High Efficiency Red Features Description z 3.0mm x 2.0mm, 1.4mm high, only minimum space The High Efficiency Red source color devices are made with required. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Suitable for compact optoelectronic applications. Light Emitting Diode. z Low power consumption. z Package : 2000pcs / reel. z Moisture sensitivity level : level 4. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4209 REV NO: V.4 DATE: NOV/26/2008 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201004314 Selection Guide Part No. Dice AA3020AEC High Efficiency Red (GaAsP/GaP) Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 2θ1/2 7 20 90° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH4209 REV NO: V.4 DATE: NOV/26/2008 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201004314 High Efficiency Red AA3020AEC SPEC NO: DSAH4209 REV NO: V.4 DATE: NOV/26/2008 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201004314 AA3020AEC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAH4209 REV NO: V.4 DATE: NOV/26/2008 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201004314 PACKING & LABEL SPECIFICATIONS AA3020AEC SPEC NO: DSAH4209 REV NO: V.4 DATE: NOV/26/2008 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201004314