AA3020ASGC

3.0x2.0mm SURFACE MOUNT LED LAMP Part Number: AA3020ASGC Super Bright Green Features Description z 3.0mm x 2.0mm, 1.4mm high, only minimum space The Super Bright Green source color devices are made with required. Gallium Phosphide Green Light Emitting Diode. z Suitable for compact optoelectronic applications. z Low power consumption. z Package : 2000pcs / reel. z Moisture sensitivity level : level 4. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4215 REV NO: V.4 DATE: NOV/26/2008 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201004465 Selection Guide Part No. Dice AA3020ASGC Super Bright Green (GaP) Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 2θ1/2 7 30 90° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 nm IF=20mA Super Bright Green 568 nm IF=20mA Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA IR Reverse Current Super Bright Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH4215 REV NO: V.4 DATE: NOV/26/2008 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201004465 Super Bright Green AA3020ASGC SPEC NO: DSAH4215 REV NO: V.4 DATE: NOV/26/2008 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201004465 AA3020ASGC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAH4215 REV NO: V.4 DATE: NOV/26/2008 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201004465 PACKING & LABEL SPECIFICATIONS AA3020ASGC SPEC NO: DSAH4215 REV NO: V.4 DATE: NOV/26/2008 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1201004465