AA3020MBCK

3.0x2.0mm SURFACE MOUNT LED LAMP AA3020MBCK BLUE Description Features l 3.0mm The Blue source color devices are made with GaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or antielectrostatic glove when handling the LEDs. electrically grounded. lSUITABLE lLOW SPACE REQUIRED. X 2.0mm, 1.4mm HIGH, ONLY MINIMUM FOR COMPACT OPTOELECTRONIC APPLICATIONS. l PACKAGE POWER CONSUMPTION. : 2000PCS / REEL. All devices, equipment and machinery must be Package Dimensions Notes: 1. All dimensions are in millimeters (inches), 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1222 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/24/2003 DRAWN: Z.Y.YANG PAGE: 1 OF 4 Selection Guide P ar t N o . AA3020MBC K BLUE(GaN) Dic e L en s Ty p e WATER C LEAR Mi n . 2.6 Iv (m c d ) @ 20 m A Ty p . 7 V i ew i n g An g le 2θ1/2 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Sy m b o l P ar am et er D ev i c e Ty p . 430 466 60 100 4.0 Max . Un its nm nm nm pF Tes t C o n d i t i o n s I F =20mA I F =20mA I F =20mA VF=0V;f=1MHz I F =20mA V R = 5V λp e a k λD ∆λ1/2 C VF IR Peak Wavelength D omi nate Wavelength Blue Blue Spectral Li ne Half-wi dth Blue C apaci tance Forward Voltage Reverse C urrent Blue Blue Blue 4.5 10 V uA Absolute Maximum Ratings at TA=25°C P ar am et er Power di ssi pati on B lu e 105 150 -40°C To +85°C 5 30 Un its mW mA V mA D C Forward C urrent Reverse Voltage Peak Forward C urrent [1] Operati ng /Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1222 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/24/2003 DRAWN: Z.Y.YANG PAGE: 2 OF 4 Blue AA3020MBCK SPEC NO: DSAD1222 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/24/2003 DRAWN: Z.Y.YANG PAGE: 3 OF 4 AA3020MBCK SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1222 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/24/2003 DRAWN: Z.Y.YANG PAGE: 4 OF 4