AA3020RWC

3.0x2.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA3020RWC/A WHITE Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic Features 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM SPACE REQUIRED. SUITABLE FOR COMPACT OPTOELECTRONIC APPLICATIONS. LOW POWER CONSUMPTION. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. TYP. COLOR TEMPERATURE:6500K COLOR COORDINATES:X=0.33,Y=0.34 ACC. TO CIE1931(WHITE). OPTICAL EFFICIENCY:9.5 lm/W(TYP.) COLOR REPRODUCTION INDEX:80. RoHS COMPLIANT. glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Applications t raffic signaling. backlighting (illuminated advertising , general lighting). i nterior and exterior automotive lighting. s ubstitution of micro incandescent lamps. reading lamps. s ignal and symbol luminaire for orientation. m arker lights (e.g. steps, exit ways, etc). decorative and entertainment lighting. i ndoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. S PEC NO: DSAG3658 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAY/22/2006 DRAWN: W.J.ZHU PAGE: 1 OF 7 ERP: 1201001589 Selection Guide Part No. Dice Lens Type luminous Intensity Iv(mcd) @ 20 mA Min. AA3020RWC/A WHITE (InGaN) WATER CLEAR 70 Typ. 125 Note2 v (mlm) @ 20 mA Typ. 630 Note3 Viewing Note1 Angle 2θ1/2 90° Absolute Maximum Ratings at TA=25°C Parameter Power dissipation Reverse Voltage Junction temperature Operating Temperature Storage Temperature DC Forward Current Peak Forward Current Note4 Symbol Pt VR TJ Top Tstg IF IFM Rth JA Rth JS Value 114 5 110 -40 To +85 -40 To +100 30 100 300 140 Unit mW V °C °C °C mA mA °C/W °C/W Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥16 mm2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage IF=20mA [Max.] [Typ.] IR Reverse Current (VR=5V) [Max.] TC x 10 -0.1 Temperature coefficient of x [Typ.] IF=20mA, -10°C T 100°C Temperature coefficient of y [Typ.] IF=20mA, -10°C T 100°C Temperature coefficient of VF IF=20mA, -10°C T 100°C [Typ.] VF Note2 Symbol X Y Note1 Value 0.33 0.34 2.7 3.3 3.8 0.01 Unit - Note1 V Reverse Current (VR=5V) µA 10-3 / °C 10-3 / °C mV/ °C TCy -0.2 TCV -2.5 Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ± 0.1V. S PEC NO: DSAG3658 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAY/22/2006 DRAWN: W.J.ZHU PAGE: 2 OF 7 ERP: 1201001589 Brightness codes luminous Intensity Iv(mcd) @ 20mA Code. M N P Q Min. 70 110 180 280 Note1 v (mlm) @ 20mA Max. 130 220 320 420 Typ. 480 710 960 1270 Note2 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White AA3020RWC/A S PEC NO: DSAG3658 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAY/22/2006 DRAWN: W.J.ZHU PAGE: 3 OF 7 ERP: 1201001589 White AA3020RWC/A S PEC NO: DSAG3658 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAY/22/2006 DRAWN: W.J.ZHU PAGE: 4 OF 7 ERP: 1201001589 Color Codes AA3020RWC/A S PEC NO: DSAG3658 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAY/22/2006 DRAWN: W.J.ZHU PAGE: 5 OF 7 ERP: 1201001589 AA3020RWC/A Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) Reel Dimension S PEC NO: DSAG3658 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAY/22/2006 DRAWN: W.J.ZHU PAGE: 6 OF 7 ERP: 1201001589 PACKING & LABEL SPECIFICATIONS AA3020RWC/A S PEC NO: DSAG3658 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAY/22/2006 DRAWN: W.J.ZHU PAGE: 7 OF 7 ERP: 1201001589