AA3020SRC

3.0x2.0mm SURFACE MOUNT LED LAMP AA3020SRC SUPER BRIGHT RED Features z 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM z SUITABLE FOR COMPACT OPTOELECTRONIC z LOW POWER CONSUMPTION. z PACKAGE : 2000PCS / REEL. z RoHS COMPLIANT. Description The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. SPACE REQUIRED. APPLICATIONS. Package Dimension s Notes: 1. All dimensions are in millimeters (inches) . 2. T olerance is ± 0 .25(0.01") unless otherwise noted . 3.Specifications are subject to change without notice . SPEC NO: DSAD1212 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/17/2005 DRAWN: H.Q.YUAN PAGE: 1 OF 4 ERP:1201000141 Selection Guid e Iv (mcd) @ 20mA Min. AA3020SRC SUPER BRIGHT RED (GaAlAs) WATER CLEAR 36 Typ. 120 Viewing Angle 2 θ 1/2 90° Part No. Dice Lens Type Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Typ. 660 640 20 45 1.85 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Red 100 30 155 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD1212 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/17/2005 DRAWN: H.Q.YUAN PAGE: 2 OF 4 ERP:1201000141 Super Bright Red AA3020SRC SPEC NO: DSAD1212 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/17/2005 DRAWN: H.Q.YUAN PAGE: 3 OF 4 ERP:1201000141 AA3020SRC Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm ) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1212 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/17/2005 DRAWN: H.Q.YUAN PAGE: 4 OF 4 ERP:1201000141