AA3020YC

3.0x2.0mm SURFACE MOUNT LED LAMP AA3020YC YELLOW Features z 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM z SUITABLE FOR COMPACT OPTOELECTRONIC z LOW POWER CONSUMPTION. z PACKAGE : 2000PCS / REEL. z RoHS COMPLIANT Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. SPACE REQUIRED. APPLICATIONS. Package Dimension s Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAD1217 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAR/17/2005 DRAWN: H.Q.YUAN PAGE: 1 OF 4 ERP:1201000159 Selection Guid e Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AA3020YC YELLOW (GaAsP/GaP) WATER CLEAR 4 Typ. 15 Viewing Angle 2θ1/2 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Yellow Yellow Yellow Yellow Yellow Yellow Device Typ. 590 588 35 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Yellow 105 30 140 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD1217 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAR/17/2005 DRAWN: H.Q.YUAN PAGE: 2 OF 4 ERP:1201000159 Yellow AA3020YC SPEC NO: DSAD1217 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAR/17/2005 DRAWN: H.Q.YUAN PAGE: 3 OF 4 ERP:1201000159 AA3020YC Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm ) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1217 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAR/17/2005 DRAWN: H.Q.YUAN PAGE: 4 OF 4 ERP:1201000159