AA3021PR4S-Z

3.0x2.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC ATTENTION O BSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA3021PR4S/Z WARM WHITE Description The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. Features 3.0MM X 2.0MM, 1.3MM HIGH, ONLY MINIMUM SPACE REQUIRED. SUITABLE FOR COMPACT OPTOELECTRONIC APPLICATIONS. LOW POWER CONSUMPTION. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. TYP. COLOR TEMPERATURE: 3400K COLOR COORDINATES:X=0.41,Y=0.39 ACC. TO CIE1931. OPTICAL EFFICIENCY: 31.3 lm/W(TYP.) COLOR REPRODUCTION INDEX: 70 RoHS COMPLIANT. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Applications t raffic signaling. b acklighting (illuminated advertising , general lighting). i nterior and exterior automotive lighting. s ubstitution of micro incandescent lamps. r eading lamps. s ignal and symbol luminaire for orientation. m arker lights (e.g. steps, exit ways, etc). d ecorative and entertainment lighting. i ndoor and outdoor commercial and residential architectural lighting. P ackage Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4043 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/14/2007 DRAWN: S.J.LIU PAGE: 1 OF 8 ERP:1201002637 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or damage the internal circuitry. 4. During surface-mounting, the pickup capillary diameter should be larger than the silicone lens to insure the capillary does not scratch or damage the lens. SPEC NO: DSAH4043 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/14/2007 DRAWN: S.J.LIU PAGE: 2 OF 8 ERP:1201002637 S election Guide Part No. Dice Lens Type luminous Intensity Iv(mcd) @ 20mA Min. AA3021PR4S/Z WARM WHITE (InGaN) WATER CLEAR 480 Typ. 600 Note2 Φv (mlm) @ 20mA Typ. 2000 Note3 Viewing Note1 Angle 2θ1/2 125° Absolute Maximum Ratings at TA=25°C Parameter Power dissipation Reverse Voltage Junction temperature Operating Temperature Storage Temperature DC Forward Current Peak Forward Current Thermal resistance Note5 Junction/ambient Junction/solder point Note4 Symbol Pt VR TJ Top Tstg IF IFM Rth JA Rth JS Value 111 5 110 -40 To +85 -40 To +100 30 100 250 100 Unit mW V °C °C °C mA mA °C/W °C/W N otes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 p er pad), Electrical / Optical Characteristics at TA=25°C Parameter Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage IF=20mA [Max.] [Typ.] IR Reverse Current (VR=5V) [Max.] TC x 10 -0.1 10-3 / °C 10-3 / °C mV/ °C Temperature coefficient of x IF=20mA, -10°C≤ T≤ 100°C [Typ.] Temperature coefficient of y IF=20mA, -10°C≤ T≤ 100°C [Typ.] Temperature coefficient of VF IF=20mA, -10°C≤ T≤ 100°C [Typ.] VF Note1 Symbol X Y Value 0.41 0.39 2.7 3.2 3.7 0.01 Unit - V Reverse Current (VR=5V) μA TCy -0.2 TCV -2.5 Note: 1. Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAH4043 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/14/2007 DRAWN: S.J.LIU PAGE: 3 OF 8 ERP:1201002637 B rightness codes luminous Intensity Iv(mcd) @ 20mA Code. S T U Min. 480 650 900 Note1 Φv (mlm) @ 20mA Max. 750 1100 1500 Typ. 1900 2100 2300 Note2 N otes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. Warm White AA3021PR4S/Z SPEC NO: DSAH4043 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/14/2007 DRAWN: S.J.LIU PAGE: 4 OF 8 ERP:1201002637 AA3021PR4S/Z SPEC NO: DSAH4043 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/14/2007 DRAWN: S.J.LIU PAGE: 5 OF 8 ERP:1201002637 AA3021PR4S/Z Warm White CIE 0.50 0.48 0.46 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 0.54 f2 f0 d2 d0 d3 d1 f1 d0 x y 0.3610 0.3850 0.3575 0.3612 0.3870 0.3820 0.3942 0.4068 x y 0.3575 0.3612 d1 0.3545 0.3408 0.3800 0.3580 0.3870 0.3820 Reference CCT : 4700~3900K d2 x y 0.3870 0.3820 0.4254 0.4044 0.4350 0.4260 0.3942 0.4068 x y Reference CCT : 4700~3900K d3 0.4254 0.4044 0.3870 0.3820 0.3800 0.3580 0.4119 0.3730 Reference CCT : 3900~3200K f0 x y 0.4350 0.4260 0.4732 0.4398 0.4600 0.4152 0.4254 0.4044 x y Reference CCT : 3900~3200K f1 0.4600 0.4152 0.4254 0.4044 0.4119 0.3730 0.4440 0.3847 Reference CCT : 3200~2700K f2 x y 0.4732 0.4398 0.4600 0.4152 0.4440 0.3847 0.4800 0.3960 0.5165 0.4510 Reference CCT : 3200~2700K Reference CCT : 2700~2300K SPEC NO: DSAH4043 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/14/2007 DRAWN: S.J.LIU PAGE: 6 OF 8 ERP:1201002637 AA3021PR4S/Z R ecommended Soldering Pattern (Units : mm; Tolerance: ±0.1) T ape Specifications (Units : mm) Reel Dimension SPEC NO: DSAH4043 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/14/2007 DRAWN: S.J.LIU PAGE: 7 OF 8 ERP:1201002637 PACKING & LABEL SPECIFICATIONS AA3021PR4S/Z SPEC NO: DSAH4043 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/14/2007 DRAWN: S.J.LIU PAGE: 8 OF 8 ERP:1201002637