AA3021QBCT/D

3.0x2.0mm SURFACE MOUNT LED LAMP Part Number: AA3021QBCT/D Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.0mm x 2.0mm, 1.3mm high, only minimum space The Blue source color devices are made with InGaN Light required. Emitting Diode. z Suitable for compact optoelectronic applications. Static electricity and surge damage the LEDS. z Low power consumption. It is recommended to use a wrist band or anti-electrostatic z Package : 2000pcs / reel. glove when handling the LEDs. z Moisture sensitivity level : level 4. All devices, equipment and machinery must be electrically z RoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK1313 REV NO: V.2 DATE: JUN/22/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 1 OF 5 ERP: 1201005796 Selection Guide Part No. Dice AA3021QBCT/D Blue (InGaN) Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type WATER CLEAR Min. Typ. 2θ1/2 50 150 125° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 25 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 4 V IF=20mA IR Reverse Current Blue 50 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAK1313 REV NO: V.2 DATE: JUN/22/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 2 OF 5 ERP: 1201005796 Blue AA3021QBCT/D SPEC NO: DSAK1313 REV NO: V.2 DATE: JUN/22/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 3 OF 5 ERP: 1201005796 AA3021QBCT/D Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAK1313 REV NO: V.2 DATE: JUN/22/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 4 OF 5 ERP: 1201005796 PACKING & LABEL SPECIFICATIONS AA3021QBCT/D SPEC NO: DSAK1313 REV NO: V.2 DATE: JUN/22/2010 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.F.Zhou PAGE: 5 OF 5 ERP: 1201005796