AA3022SGC-4.5SF

3.0x2.2mm SINGLE COLOR SURFACE MOUNT LED LAMP Part Number: AA3022SGC-4.5SF Super Bright Green Features Description z 3.0mm x 2.2mm SMT LED, 1.5mm thickness. The Super Bright Green source color devices are made with z White reflector to maximize reflection of light. Gallium Phosphide Green Light Emitting Diode. z Ultra-compact type assures space saving. z High efficiency & low power consumption. z Moisture sensitivity level : level 4. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD1228 REV NO: V.6 DATE: NOV/26/2008 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201004477 Selection Guide Part No. Dice AA3022SGC-4.5SF Lens Type Super Bright Green (GaP) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 7 20 90° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 nm IF=20mA Super Bright Green 568 nm IF=20mA Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA IR Reverse Current Super Bright Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1228 REV NO: V.6 DATE: NOV/26/2008 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201004477 Super Bright Green AA3022SGC-4.5SF SPEC NO: DSAD1228 REV NO: V.6 DATE: NOV/26/2008 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201004477 AA3022SGC-4.5SF Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAD1228 REV NO: V.6 DATE: NOV/26/2008 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201004477 PACKING & LABEL SPECIFICATIONS AA3022SGC-4.5SF SPEC NO: DSAD1228 REV NO: V.6 DATE: NOV/26/2008 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201004477