AA3528APBC/A

3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: AA3528APBC/A Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Single color. The Blue source color devices are made with InGaN z Suitable for all SMT assembly and solder process. on SiC Light Emitting Diode. z Available on tape and reel. Static electricity and surge damage the LEDS. z Ideal for backlighting. It is recommended to use a wrist band or anti-electrostatic z Package : 1500pcs / reel. glove when handling the LEDs. z Moisture sensitivity level : level 4. All devices, equipment and machinery must be electrically z RoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4237 REV NO: V.3 DATE: NOV/26/2008 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 1 OF 5 ERP: 1201004083 Selection Guide Part No. Dice AA3528APBC/A Lens Type Blue (InGaN) WATER CLEAR Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 18 60 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH4237 REV NO: V.3 DATE: NOV/26/2008 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 2 OF 5 ERP: 1201004083 Blue AA3528APBC/A SPEC NO: DSAH4237 REV NO: V.3 DATE: NOV/26/2008 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 3 OF 5 ERP: 1201004083 AA3528APBC/A Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAH4237 REV NO: V.3 DATE: NOV/26/2008 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 4 OF 5 ERP: 1201004083 PACKING & LABEL SPECIFICATIONS AA3528APBC/A SPEC NO: DSAH4237 REV NO: V.3 DATE: NOV/26/2008 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen PAGE: 5 OF 5 ERP: 1201004083