AA3528AYC

3.5x2.8 mm SMD CHIP LED LAMP Part Number: AA3528AYC Yellow Features SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 1500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4228 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/11/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1201002894 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. AA3528AYC Yellow (GaAsP/GaP) WATER CLEAR 4 Typ. 15 Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Yellow Yellow Yellow Yellow Yellow Yellow Typ. 590 588 35 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Yellow 75 30 140 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAH4228 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/11/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1201002894 Yellow AA3528AYC SPEC NO: DSAH4228 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/11/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1201002894 AA3528AYC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH4228 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/11/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1201002894 PACKING & LABEL SPECIFICATIONS AA3528AYC SPEC NO: DSAH4228 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: MAY/11/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1201002894