AA3528MGC

3.5x2.8 mm SMD CHIP LED LAMP AA3528MGC MEGA GREEN Features SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 1500PCS / REEL. RoHS COMPLIANT. Description The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. S PEC NO: DSAC3292 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: MAR/21/2005 DRAWN: W.J.ZHU PAGE: 1 OF 4 ERP:1201000308 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AA3528MGC MEGA GREEN (InGaAlP) WATER CLEAR 70 Typ. 150 Viewing Angle 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Mega Green Mega Green Mega Green Mega Green Mega Green Mega Green Typ. 574 568 26 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Mega Green 125 50 150 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAC3292 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: MAR/21/2005 DRAWN: W.J.ZHU PAGE: 2 OF 4 ERP:1201000308 Mega Green AA3528MGC S PEC NO: DSAC3292 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: MAR/21/2005 DRAWN: W.J.ZHU PAGE: 3 OF 4 ERP:1201000308 AA3528MGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAC3292 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: MAR/21/2005 DRAWN: W.J.ZHU PAGE: 4 OF 4 ERP:1201000308