AA3528PWC

3.5x2.8 mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICE S AA3528PWC/J WHITE PRELIMINARY SPEC Features z SINGLE Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. ON TAPE AND REEL. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. COLOR. FOR ALL SMT ASSEMBLY AND SOLDER z SUITABLE PROCESS. z AVAILABLE z IDEAL FOR BACKLIGHTING. : 1500PCS / REEL. z PACKAGE zRoHS COMPLIANT. Package Dimension s Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. S PEC NO: DSAF3391 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAY/09/2005 DRAWN: S.H.CHEN PAGE: 1 OF 5 E RP:1201001559 Selection Guid e Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AA3528PWC/J WHITE (InGaN) WATER CLEAR 380 Typ. 800 Viewing Angle 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol VF IR X Chromaticity Coordinates Y C Capacitance White White 0.34 110 pF VF=0V;f=1MHz Parameter Forward Voltage Reverse Current White White 0.33 Device Typ. 3.2 Max. 4.0 10 Units V uA Test Conditions IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. White 120 30 100 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAF3391 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAY/09/2005 DRAWN: S.H.CHEN PAGE: 2 OF 5 E RP:1201001559 White AA3528PWC/J S PEC NO: DSAF3391 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAY/09/2005 DRAWN: S.H.CHEN PAGE: 3 OF 5 E RP:1201001559 AA3528PWC/J Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm ) S PEC NO: DSAF3391 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAY/09/2005 DRAWN: S.H.CHEN PAGE: 4 OF 5 E RP:1201001559 PACKING & LABEL SPECIFICATIONS AA3528PWC/J Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or chromaticity), the typical accuracy of the sorting process is as follows: 1. Chromaticity Coordinates X, Y: +/-0.02 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAF3391 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAY/09/2005 DRAWN: S.H.CHEN PAGE: 5 OF 5 E RP:1201001559