AA3528SF4C

3.5x2.8 mm SMD CHIP LED LAMP AA3528SF4C Features SINGLE COLOR. S UITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. A VAILABLE ON TAPE AND REEL. I DEAL FOR BACKLIGHTING. PACKAGE : 1500PCS / REEL Description SF4 Made with Gallium Aluminum Arsenide Infrared Emitting diodes. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1362 APPROVED:J.LU REV NO: V.1 CHECKED:Allen Liu DATE: MAR/31/2003 DRAWN: D.L.HUANG PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e L en s Ty p e Po = (m W/s r ) @20m A *50m A Min . 0.4 A A 3528S F 4C GaAlAs WATER CLEAR *2.6 Ty p . 3 *4 V i ew i n g An g l e 2θ1/ 2 120° 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 50mA. Electrical / Optical Characteristics at TA=25°C P ar am et er Forward Voltage Reverse Current Capacitance Wavelength at peak emission Spectral line half-width S F4 S F4 S F4 S F4 S F4 P/N Sy m b o l VF IR C λP ∆ λ 1/2 Ty p . 1.3 90 880 50 Max . 1.6 10 Un it V uA pF nm nm Co n d itio n IF = 2 0 m A V R= 5 V V F = 0 V; f= 1 M Hz IF = 2 0 m A IF = 2 0 m A Absolute Maximum Ratings at TA=25°C P ar am et er Power Dissipation Forward Current Peak Forward Current[1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/100 Duty Cycle, 10us Pulse Width. Sy m b o l PT IF i FS VR TA T S TG S F4 100 50 1.2 5 -40~ +85 -40~ +85 Un its mW mA A V °C °C SPEC NO: DSAD1362 APPROVED:J.LU REV NO: V.1 CHECKED:Allen Liu DATE: MAR/31/2003 DRAWN: D.L.HUANG PAGE: 2 OF 4 AA3528SF4C SPEC NO: DSAD1362 APPROVED:J.LU REV NO: V.1 CHECKED:Allen Liu DATE: MAR/31/2003 DRAWN: D.L.HUANG PAGE: 3 OF 4 AA3528SF4C SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1362 APPROVED:J.LU REV NO: V.1 CHECKED:Allen Liu DATE: MAR/31/2003 DRAWN: D.L.HUANG PAGE: 4 OF 4