AA3528SGC

3.5x2.8 mm SMD CHIP LED LAMP AA3528SGC SUPER BRIGHT GREEN Features SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 1500PCS / REEL. RoHS COMPLIANT. Description The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions N ot es : 1. A l l di m ens i ons are i n m i l l i m et ers (i nc hes ). 2. T ol eranc e i s ± 0. 25 (0. 0 1" ) unl es s ot her wi s e not e d. 3. S pec i f i c at i ons a re s ubj e c t t o c hange wi t hout n ot i c e. S PEC NO: DSAB0787 APPROVED: J. Lu REV NO: V.8 CHECKED: Allen Liu DATE: MAR/21/2005 DRAWN: W.J.ZHU PAGE: 1 OF 4 ERP: 1201000371 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AA3528SGC SUPER BRIGHT GREEN (GaP) WATER CLEAR 10 Typ. 25 Viewing Angle 2 θ 1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Typ. 565 568 30 15 2.2 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Green 62.5 25 140 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAB0787 APPROVED: J. Lu REV NO: V.8 CHECKED: Allen Liu DATE: MAR/21/2005 DRAWN: W.J.ZHU PAGE: 2 OF 4 ERP: 1201000371 Super Bright Green AA3528SGC S PEC NO: DSAB0787 APPROVED: J. Lu REV NO: V.8 CHECKED: Allen Liu DATE: MAR/21/2005 DRAWN: W.J.ZHU PAGE: 3 OF 4 ERP: 1201000371 AA3528SGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAB0787 APPROVED: J. Lu REV NO: V.8 CHECKED: Allen Liu DATE: MAR/21/2005 DRAWN: W.J.ZHU PAGE: 4 OF 4 ERP: 1201000371