AA3528SURC

3.5x2.8mm SMD CHIP LED LAMP AA3528SURC HYPER RED Features !SINGLE Description The Hyper Red source color devices are made with DH Diode. InGaAlP on GaAs substrate Light Emitting FOR ALL SMT ASSEMBLY AND ON TAPE AND REEL. COLOR. ! SUITABLE SOLDER PROCESS. ! AVAILABLE ! IDEAL FOR BACKLIGHTING. : 1500PCS / REEL. ! PACKAGE Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0 .25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. S PEC NO: DSAA6758 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/27/2003 DRAWN: K.ZHANG PAGE: 1 OF 4 Selection Guide Par t No . Dic e L en s Ty p e Iv (m c d ) @ 20 m A Min . AA3528SURC HYPER RED ( InGaAlP ) WATER CLEAR 110 Ty p . 23 0 V i ew i n g An g l e 2θ1/2 12 0 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°C Sy m b o l λpeak λD ∆λ1/2 C VF IR Par am et er Peak Wavelength Dominate Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current D ev i c e Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Ty p . 640 6 28 27 45 1.9 2.5 10 Max . Un it s nm nm nm pF V uA Tes t Co n d it io n s I F =20mA I F =20mA I F =20mA VF=0V;f=1MHz I F =20mA V R = 5V Absolute Maximum Ratings at T)=25°C P ar am e t e r Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. H y p e r R ed 170 30 185 5 -40°C To +85°C Un it s mW mA mA V S PEC NO: DSAA6758 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/27/2003 DRAWN: K.ZHANG PAGE: 2 OF 4 Hyper Red AA3528SURC S PEC NO: DSAA6758 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/27/2003 DRAWN: K.ZHANG PAGE: 3 OF 4 AA3528SURC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) S PEC NO: DSAA6758 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/27/2003 DRAWN: K.ZHANG PAGE: 4 OF 4