AA3528VGC

3.5x2.8 mm SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION O BSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number : AA3528VGC/Z GREEN Features ●SINGLE COLOR. ● SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. ● AVAILABLE ON TAPE AND REEL. ● IDEAL FOR BACKLIGHTING. ●PACKAGE : 1500PCS / REEL. ●MOISTURE SENSITIVITY LEVEL : LEVEL 4. ●RoHS COMPLIANT. Description The Green source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. P ackage Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAH0311 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: DEC/04/2006 DRAWN: F.ZHANG PAGE: 1 OF 5 ERP: 1201002601 S election Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. AA3528VGC/Z GREEN (InGaN ) WATER CLEAR 480 Typ. 800 Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 525 535 39 65 3.3 Max. Units nm nm nm pF Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V 3.8 10 V uA Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Green 114 30 100 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAH0311 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: DEC/04/2006 DRAWN: F.ZHANG PAGE: 2 OF 5 ERP: 1201002601 Green AA3528VGC/Z SPEC NO: DSAH0311 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: DEC/04/2006 DRAWN: F.ZHANG PAGE: 3 OF 5 ERP: 1201002601 AA3528VGC/Z Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) T ape Specifications (Units : mm) SPEC NO: DSAH0311 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: DEC/04/2006 DRAWN: F.ZHANG PAGE: 4 OF 5 ERP: 1201002601 PACKING & LABEL SPECIFICATIONS AA3528VGC/Z SPEC NO: DSAH0311 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: DEC/04/2006 DRAWN: F.ZHANG PAGE: 5 OF 5 ERP: 1201002601