AA3528VRVFS/A

AA3528VRVFS/A 3.5 x 2.8 mm Surface Mount LED Lamp DESCRIPTIONS



PACKAGE DIMENSIONS The source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES







Single color Suitable for all SMD assembly and solder process Available on tape and reel Ideal for backlighting Package: 2000 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant APPLICATIONS




Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE Iv (mcd) @ 20mA [2] Part Number AA3528VRVFS/A Emitting Color (Material) ■ Violet (InGaN) Viewing Angle [1] Min. Typ. 2θ1/2 120 250 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. © 2021 Kingbright. All Rights Reserved. Spec No: DSAK5297 / 1201006175 Rev No: V.7B Date: 02/26/2021 Page 1 / 5 AA3528VRVFS/A ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Value Parameter Symbol Emitting Color Unit Typ. Max. Chromaticity Coordinates x IF = 20mA x [1] Violet 0.19 - - Chromaticity Coordinates y IF = 20mA y [1] Violet 0.05 - - C Violet 100 - pF Forward Voltage IF = 20mA VF [2] Violet 3.3 4.0 V Reverse Current (VR = 5V) IR Violet - 50 µA Capacitance Notes: 1. Measurement tolerance of the chromaticity coordinates is ± 0.01. 2. Forward voltage: ±0.1V. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at TA=25°C Parameter Symbol Value Unit Power Dissipation PD 120 mW Reverse Voltage VR 5 V Junction Temperature Tj 100 °C Operating Temperature Top -40 to +85 °C Storage Temperature Tstg -40 to +85 °C DC Forward Current IF 30 mA IFM [1] 100 mA - 250 V Peak Forward Current Electrostatic Discharge Threshold (HBM) Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. © 2021 Kingbright. All Rights Reserved. Spec No: DSAK5297 / 1201006175 Rev No: V.7B Date: 02/26/2021 Page 2 / 5 AA3528VRVFS/A TECHNICAL DATA SPATIAL DISTRIBUTION -15° Ta = 25 °C 0° 15° 30° -30° 45° -45° 60° -60° 75° -75° -90° 1.0 0.5 0.0 90° 1.0 0.5 VIOLET Forward current (mA) Ta = 25 °C 40 30 20 10 2.5 Permissible forward current (mA) Luminous intensity normalised at 20mA 50 0 2.0 Forward Current Derating Curve Luminous Intensity vs. Forward Current Ta = 25 °C 2.0 1.5 1.0 0.5 0.0 2.4 2.8 3.2 3.6 Forward voltage (V) 4.0 0 10 20 30 40 Forward current (mA) 50 REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS 50 Luminous Intensity vs. Ambient Temperature Luminous intensity normalised at Ta = 25 °C Forward Current vs. Forward Voltage 40 30 20 10 0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) -40 -20 0 20 40 60 80 100 Ambient temperature (°C) TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. © 2021 Kingbright. All Rights Reserved. Spec No: DSAK5297 / 1201006175 Rev No: V.7B Date: 02/26/2021 Page 3 / 5 AA3528VRVFS/A CIE CHROMATICITY DIAGRAM 0.3 VA VA1 VA2 VA3 VB1 VB2 VC VB3 VC1 VC2 VC3 VD1 VD2 VD VB 0.2 y VD VE 0.1 VF VE1 VE2 VE3 VF1 VF2 VF3 0.0 0.1 0.2 0.3 0.4 0.5 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. 0.6 x x y x y x y 0.4735 0.2451 0.3629 0.1737 0.2556 0.1044 0.4548 0.2330 0.3448 0.1620 0.2380 0.0931 VA1 VC1 VE1 0.4783 0.2194 0.3713 0.1518 0.2682 0.0867 0.4964 0.2309 0.3888 0.1629 0.2850 0.0973 0.4548 0.2330 0.3448 0.1620 0.2380 0.0931 0.4363 0.2211 0.3267 0.1504 0.2205 0.0818 VA2 VC2 VE2 0.4602 0.2080 0.3538 0.1408 0.2514 0.0761 0.4783 0.2194 0.3713 0.1518 0.2682 0.0867 0.4363 0.2211 0.3267 0.1504 0.2205 0.0818 0.4178 0.2091 0.3088 0.1388 0.2030 0.0705 VA3 VC3 VE3 0.4422 0.1966 0.3364 0.1298 0.2347 0.0656 0.4602 0.2080 0.3538 0.1408 0.2514 0.0761 0.4178 0.2091 0.3088 0.1388 0.2030 0.0705 0.3994 0.1973 0.2910 0.1273 0.1857 0.0593 VB1 VD1 VF1 0.4243 0.1853 0.3192 0.1189 0.2182 0.0551 0.4422 0.1966 0.3364 0.1298 0.2347 0.0656 0.3994 0.1973 0.2910 0.1273 0.1857 0.0593 0.3811 0.1855 0.2732 0.1158 0.1683 0.0481 VB2 VD2 VF2 0.4065 0.1741 0.3021 0.1081 0.2018 0.0448 0.4243 0.1853 0.3192 0.1189 0.2182 0.0551 0.3811 0.1855 0.2732 0.1158 0.1683 0.0481 0.3629 0.1737 0.2556 0.1044 0.1510 0.0369 VB3 VD3 VF3 0.3888 0.1629 0.2850 0.0973 0.1856 0.0345 0.4065 0.1741 0.3021 0.1081 0.2018 0.0448 © 2021 Kingbright. All Rights Reserved. Spec No: DSAK5297 / 1201006175 Rev No: V.7B Date: 02/26/2021 Page 4 / 5 AA3528VRVFS/A PACKING & LABEL SPECIFICATIONS HANDLING PRECAUTIONS Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4-1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. 4-2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4-3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of lead frame. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes © 2021 Kingbright. All Rights Reserved. Spec No: DSAK5297 / 1201006175 Rev No: V.7B Date: 02/26/2021 Page 5 / 5