AA3528YC

3.5x2.8 mm SMD CHIP LED LAMP AA3528YC YELLOW Features SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 1500PCS / REEL. RoHS COMPLIANT. Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB4001 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: MAR/21/2005 DRAWN: W.J.ZHU PAGE: 1 OF 4 ERP:1201000429 Selection Guide Iv (mcd) @ 20mA Min. AA3528YC YELLOW (GaAsP/GaP) WATER CLEAR 4 Typ. 15 Viewing Angle 2θ1/2 120° Part No. Dice Lens Type Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Yellow Yellow Yellow Yellow Yellow Yellow Typ. 590 588 35 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Yellow 75 30 140 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAB4001 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: MAR/21/2005 DRAWN: W.J.ZHU PAGE: 2 OF 4 ERP:1201000429 Yellow AA3528YC SPEC NO: DSAB4001 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: MAR/21/2005 DRAWN: W.J.ZHU PAGE: 3 OF 4 ERP:1201000429 AA3528YC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. D i g i t a l l y s i g n e d b y N I N G T I N G c n = N I N G T I N G , o = N I N G T I N G , c = C N D a t e : 2 0 0 5 . 0 3 . 2 2 1 8 : 4 8 : 2 6 + 0 8 '0 0 'R e a s o n : < n o n e > SPEC NO: DSAB4001 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: MAR/21/2005 DRAWN: W.J.ZHU PAGE: 4 OF 4 ERP:1201000429