AA4040SURC

4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP AA4040SURC HYPER RED Features S INGLE COLOR. S UITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. A VAILABLE ON TAPE AND REEL. I DEAL FOR BACKLIGHTING. P ACKAGE : 500PCS / REEL. RoHS COMPLIANT. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. S PEC NO: DSAC5128 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: B.H.LI PAGE: 1 OF 5 ERP:1201000477 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AA4040SURC HYPER RED (InGaAlP) WATER CLEAR 70 Typ. 200 Viewing Angle 2θ1/2 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 640 628 27 45 1.9 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Red 170 30 185 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAC5128 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: B.H.LI PAGE: 2 OF 5 ERP:1201000477 Hyper Red AA4040SURC S PEC NO: DSAC5128 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: B.H.LI PAGE: 3 OF 5 ERP:1201000477 AA4040SURC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) S PEC NO: DSAC5128 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: B.H.LI PAGE: 4 OF 5 ERP:1201000477 PACKING & LABEL SPECIFICATIONS AA4040SURC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAC5128 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: B.H.LI PAGE: 5 OF 5 ERP:1201000477