AA4040YC

4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP AA4040YC YELLOW Features S INGLE COLOR. S UITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. A VAILABLE ON TAPE AND REEL. I DEAL FOR BACKLIGHTING. P ACKAGE : 500PCS / REEL. RoHS COMPLIANT. Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0 .25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. S PEC NO: DSAA4909 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: B.H.LI PAGE: 1 OF 5 ERP:1201000488 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20 mA Min. AA4040YC YELLOW (GaAsP/GaP) WATER CLEAR 4 Typ. 9 Viewing Angle 2θ1/2 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Yellow Yellow Yellow Yellow Yellow Yellow Typ. 590 588 35 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Yellow 105 30 140 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAA4909 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: B.H.LI PAGE: 2 OF 5 ERP:1201000488 Yellow AA4040YC S PEC NO: DSAA4909 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: B.H.LI PAGE: 3 OF 5 ERP:1201000488 AA4040YC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) S PEC NO: DSAA4909 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: B.H.LI PAGE: 4 OF 5 ERP:1201000488 PACKING & LABEL SPECIFICATIONS AA4040YC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAA4909 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: B.H.LI PAGE: 5 OF 5 ERP:1201000488