AA4040ZGC

4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP Part Number: AA4040ZGC Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description zSingle color. The Green source color devices are made with InGaN zSuitable for all SMT assembly and solder process. on Sapphire Light Emitting Diode. zAvailable on tape and reel. Static electricity and surge damage the LEDS. zIdeal for backlighting. It is recommended to use a wrist band or anti-electrostatic zPackage : 500pcs / reel. glove when handling the LEDs. zMoisture sensitivity level : level 4. All devices, equipment and machinery must be electrically zRoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH1840 REV NO: V.5 DATE: MAR/27/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 1 OF 5 ERP: 1201004478 Selection Guide Part No. Dice AA4040ZGC Lens Type Green (InGaN) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 380 600 90° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 515 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.3 4.1 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 102.5 mW DC Forward Current 25 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH1840 REV NO: V.5 DATE: MAR/27/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 2 OF 5 ERP: 1201004478 Green AA4040ZGC SPEC NO: DSAH1840 REV NO: V.5 DATE: MAR/27/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 3 OF 5 ERP: 1201004478 AA4040ZGC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAH1840 REV NO: V.5 DATE: MAR/27/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 4 OF 5 ERP: 1201004478 PACKING & LABEL SPECIFICATIONS AA4040ZGC SPEC NO: DSAH1840 REV NO: V.5 DATE: MAR/27/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 5 OF 5 ERP: 1201004478