AA5060SEC-J

5.0X6.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: AA5060SEC/J HYPER ORANGE Features SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Super Bright device is based on light emitting diode chip made from AlInGaP. P ackage Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG5694 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: JUN/20/2007 DRAWN: D.M.LIU PAGE: 1 OF 5 ERP:1201003066 S election Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. AA5060SEC/J HYPER ORANGE (AlInGaP) WATER CLEAR 3300 Typ. 4500 Viewing Angle [1] 2θ1/2 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Orange Hyper Orange Hyper Orange Hyper Orange Hyper Orange Hyper Orange Typ. 640 630 25 27 2.2 2.8 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Orange 140 50 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAG5694 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: JUN/20/2007 DRAWN: D.M.LIU PAGE: 2 OF 5 ERP:1201003066 Hyper Orange AA5060SEC/J SPEC NO: DSAG5694 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: JUN/20/2007 DRAWN: D.M.LIU PAGE: 3 OF 5 ERP:1201003066 AA5060SEC/J R ecommended Soldering Pattern (Units : mm; Tolerance: ±0.1) T ape Specifications (Units : mm) SPEC NO: DSAG5694 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: JUN/20/2007 DRAWN: D.M.LIU PAGE: 4 OF 5 ERP:1201003066 PACKING & LABEL SPECIFICATIONS AA5060SEC/J SPEC NO: DSAG5694 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: JUN/20/2007 DRAWN: D.M.LIU PAGE: 5 OF 5 ERP:1201003066