AA5060SURC_1

5.0X6.0mm SURFACE MOUNT LED LAMP AA5060SURC/G HYPER RED Features z SINGLE Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. COLOR. FOR ALL SMT ASSEMBLY AND SOLDER z SUITABLE PROCESS. z AVAILABLE z IDEAL ON TAPE AND REEL. FOR BACKLIGHTING. : 500PCS / REEL. z PACKAGE zRoHS COMPLIANT. . Package Dimension s Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD0898 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/09/2005 DRAWN: S.H.CHEN PAGE: 1 OF 4 ERP:1201000537 Selection Guid e Part No. Dice Lens Type Iv (mcd) @ 50mA Min. AA5060SURC/G HYPER RED (InGaAlP) WATER CLEAR 480 Typ. 750 Viewing Angle 2θ1/2 100° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 640 630 22 45 1.9 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Red 100 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD0898 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/09/2005 DRAWN: S.H.CHEN PAGE: 2 OF 4 ERP:1201000537 Hyper Red AA5060SURC/G SPEC NO: DSAD0898 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/09/2005 DRAWN: S.H.CHEN PAGE: 3 OF 4 ERP:1201000537 AA5060SURC/G Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD0898 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/09/2005 DRAWN: S.H.CHEN PAGE: 4 OF 4 ERP:1201000537