AA5060SYC_1

5.0X6.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: AA5060SYC/J SUPER BRIGHT YELLOW Features SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Super Bright device is based on a light emitting diode chip made from AlGaInP and bonded on silicon substrate. P ackage Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG3567 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/19/2006 DRAWN: Y.W.WANG PAGE: 1 OF 5 ERP: 1201002218 S election Guide Part No. Dice Lens Type Iv (mcd) [2] @ 30 mA Min. AA5060SYC/J SUPER BRIGHT YELLOW (AlGaInP) WATER CLEAR 380 Typ. 800 Viewing Angle [1] 2θ1/2 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Typ. 590 589 20 45 2.3 2.8 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Yellow 140 50 140 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAG3567 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/19/2006 DRAWN: Y.W.WANG PAGE: 2 OF 5 ERP: 1201002218 Super Bright Yellow AA5060SYC/J SPEC NO: DSAG3567 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/19/2006 DRAWN: Y.W.WANG PAGE: 3 OF 5 ERP: 1201002218 AA5060SYC/J Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) T ape Specifications (Units : mm) SPEC NO: DSAG3567 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/19/2006 DRAWN: Y.W.WANG PAGE: 4 OF 5 ERP: 1201002218 PACKING & LABEL SPECIFICATIONS AA5060SYC/J SPEC NO: DSAG3567 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/19/2006 DRAWN: Y.W.WANG PAGE: 5 OF 5 ERP: 1201002218