AAAF3528PBGSEJVGAW

3.5X2.8mm SURFACE MOUNT SMD CHIP LED PRELIMINARY SPEC ATTENTION O BSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAAF3528PBGSEJVGAW BLUE HYPER ORANGE GREEN Features OUTSTANDING MATERIAL EFFICIENCY. LOW POWER CONSUMPTION. ONE BLUE, ONE ORANGE AND ONE GREEN CHIPS IN ONE PACKAGE. CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description T he Blue source color d evices are made with InGaN on SiC L ight E mitting D iode. The Super Bright device is based on a light emitting diode chip made from AlGaInP and bonded on silicon substrate. The Green source color devices are made with InGaN on G-SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. P ackage Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH1780 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2007 DRAWN: F.ZHANG PAGE: 1 OF 7 ERP:1201002750 S election Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. BLUE (InGaN) AAAF3528PBGSEJVGAW HYPER ORANGE (AlGaInP) GREEN (InGaN) WHITE DIFFUSED 70 900 110 Typ. 200 1700 330 120° Viewing Angle [1] 2θ1/2 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak Parameter Peak Wavelength Device Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Typ. 468 640 520 470 630 525 26 25 35 110 27 100 3.6 2.0 3.2 4.3 2.8 4.0 10 10 10 Max. Units nm Test Conditions IF=20mA λD [1] Dominant Wavelength nm IF=20mA Δλ1/2 Spectral Line Half-width nm IF=20mA C Capacitance pF VF=0V;f=1MHz VF [2] Forward Voltage V IF=20mA IR Reverse Current uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Blue 129 30 150 Hyper Orange 140 50 150 5 -40°C To +85°C Green 200 50 100 Units mW mA mA V SPEC NO: DSAH1780 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2007 DRAWN: F.ZHANG PAGE: 2 OF 7 ERP:1201002750 AAAF3528PBGSEJVGAW Blue SPEC NO: DSAH1780 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2007 DRAWN: F.ZHANG PAGE: 3 OF 7 ERP:1201002750 Hyper Orange SPEC NO: DSAH1780 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2007 DRAWN: F.ZHANG PAGE: 4 OF 7 ERP:1201002750 Green SPEC NO: DSAH1780 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2007 DRAWN: F.ZHANG PAGE: 5 OF 7 ERP:1201002750 AAAF3528PBGSEJVGAW Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) T ape Specifications (Units : mm) SPEC NO: DSAH1780 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2007 DRAWN: F.ZHANG PAGE: 6 OF 7 ERP:1201002750 PACKING & LABEL SPECIFICATIONS AAAF3528PBGSEJVGAW SPEC NO: DSAH1780 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JAN/30/2007 DRAWN: F.ZHANG PAGE: 7 OF 7 ERP:1201002750