AAAF5051-02

5.0mm x 5.0mm FULL-COLOR SURFACE MOUNT LED LAMP PRELIMINARY SPEC ATTENTION O BSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAAF5051-02 Blue Reddish-Orange Green Features CHIPS CAN BE CONTROLLED SEPARATELY. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. WHITE SMD PACKAGE, SILICONE RESIN. PACKAGE: 500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Blue source color devices are made with InGaAlN Vertical Light Emitting Diode. This devices are made with AlGaInP. The Green source color devices are made with InGaAlN Vertical Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15[±0.006]unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH9800 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/18/2007 DRAWN: R.Chen PAGE: 1 OF 9 ERP: 1201003347 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or damage the internal circuitry. 4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. 5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. SPEC NO: DSAH9800 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/18/2007 DRAWN: R.Chen PAGE: 2 OF 9 ERP: 1201003347 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 120mA Min. Blue (InGaAlN) AAAF5051-02 Reddish-Orange (AlGaInP) Green (InGaAlN) WATER CLEAR 1200 2500 3800 Typ. 1450 3100 4900 Φv (mlm) [2] @ 120mA Min. 5000 8000 12500 Typ. 6300 9000 17000 120° Viewing Angle [1] 2θ1/2 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Parameter Symbol Device Blue Power dissipation Pt Reddish-Orange Green Blue Junction temperature TJ Reddish-Orange Green Blue Operating Temperature Top Reddish-Orange Green Blue Storage Temperature Tstg Reddish-Orange Green Blue DC Forward Current [1] IF Reddish-Orange Green Blue Peak Forward Current [2] IFM Reddish-Orange Green Blue Thermal resistance Rth j-a Reddish-Orange Green Blue Electrostatic Discharge Threshold (HBM) Reddish-Orange Green Notes: 1. Results from mounting on PC board FR4(pad size ≥ 100mm 2 ),mounted on pc board-metal core PCB is recommend for lowest thermal resistance. 2. 1/10 Duty Cycle, 0.1ms Pulse Width. Value 0.432 0.336 0.444 110 110 110 Unit W °C -40 To +85 °C -40 To +85 °C 120 120 120 300 300 300 220 270 200 °C/W mA mA 8000 V SPEC NO: DSAH9800 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/18/2007 DRAWN: R.Chen PAGE: 3 OF 9 ERP: 1201003347 Electrical / Optical Characteristics at TA=25°C Value Parameter Symbol Device Min. Blue Wavelength at peak emission IF=120mA λ peak Reddish-Orange Green Blue Dominant Wavelength IF=120mA λ dom [1] Reddish-Orange Green Blue Spectral Line Half-width IF=120mA Δλ1/2 Reddish-Orange Green Blue Forward Voltage IF=120mA VF [2] Reddish-Orange Green Blue Temperature coefficient of λ peak IF=120mA, -10 ° C≤ T≤100 ° C TC λ peak Reddish-Orange Green Blue Temperature coefficient of λ dom IF=120mA, -10 ° C≤ T≤100 ° C TC λ dom Reddish-Orange Green Blue Temperature coefficient of VF IF=120mA, -10 ° C≤ T≤100 ° C TCV Reddish-Orange Green Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Unit Typ. 450 633 515 457 624 525 20 30 30 2.6 1.8 2.6 3.1 2.3 3.2 0.12 0.09 0.13 0.1 0.03 0.11 -2.3 -2.7 -3.9 mV/ ° C nm/ ° C nm/ ° C 3.6 2.8 3.7 V nm nm nm Max. SPEC NO: DSAH9800 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/18/2007 DRAWN: R.Chen PAGE: 4 OF 9 ERP: 1201003347 AAAF5051-02 Blue SPEC NO: DSAH9800 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/18/2007 DRAWN: R.Chen PAGE: 5 OF 9 ERP: 1201003347 Reddish-Orange SPEC NO: DSAH9800 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/18/2007 DRAWN: R.Chen PAGE: 6 OF 9 ERP: 1201003347 Green SPEC NO: DSAH9800 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/18/2007 DRAWN: R.Chen PAGE: 7 OF 9 ERP: 1201003347 AAAF5051-02 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH9800 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/18/2007 DRAWN: R.Chen PAGE: 8 OF 9 ERP: 1201003347 PACKING & LABEL SPECIFICATIONS AAAF5051-02 yalin 數位簽署者：yalin DN：cn=yalin, o, ou, email=sjhou@cn. kingbright.com, c=< 無> 日期︰2007.12.18 13:30:21 +08'00' SPEC NO: DSAH9800 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/18/2007 DRAWN: R.Chen PAGE: 9 OF 9 ERP: 1201003347