AAAF5060BESEEVGA

5.0mm x 6.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAAF5060BESEEVGA BLUE HYPER ORANGE GREEN Features CHIPS CAN BE CONTROLLED SEPARATELY. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. PACKAGE: 500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Blue source color devices are made with InGaN on SiC Light Emitting Diode. The Hyper Orange source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. The Green source color devices are made with InGaN on G-SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG5856 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JUN/21/2006 DRAWN: W.J.ZHU PAGE: 1 OF 7 ERP: 1201002372 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @30mA *50mA Min. BLUE (InGaN) AAAF5060BESEEVGA HYPER ORANGE(InGaAIP) GREEN (InGaN) WATER CLEAR 110 *650 180 Typ. 250 *1000 350 100° Viewing Angle [1] 2 θ 1/2 Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. *Luminous intensity with asterisk is measured at 50mA; Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak Parameter Peak Wavelength Device Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Typ. 465 630 520 470 621 525 25 20 35 110 25 100 3.7 2.0 3.2 4.3 2.5 4.0 10 10 10 Max. Units nm Test Conditions IF=20mA λD [1] Dominant Wavelength nm IF=20mA ∆λ1/2 Spectral Line Half-width nm IF=20mA C Capacitance pF VF=0V;f=1MHz VF [2] Forward Voltage V IF=20mA IR Reverse Current uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation [2] DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Within 350mW at all chips are lightened. Blue Hyper Orange 350 Green Units mW 30 160 5 50 195 5 -40°C To +85°C 50 100 5 mA mA V SPEC NO: DSAG5856 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JUN/21/2006 DRAWN: W.J.ZHU PAGE: 2 OF 7 ERP: 1201002372 AAAF5060BESEEVGA Blue SPEC NO: DSAG5856 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JUN/21/2006 DRAWN: W.J.ZHU PAGE: 3 OF 7 ERP: 1201002372 Hyper Orange SPEC NO: DSAG5856 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JUN/21/2006 DRAWN: W.J.ZHU PAGE: 4 OF 7 ERP: 1201002372 Green SPEC NO: DSAG5856 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JUN/21/2006 DRAWN: W.J.ZHU PAGE: 5 OF 7 ERP: 1201002372 AAAF5060BESEEVGA Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5856 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JUN/21/2006 DRAWN: W.J.ZHU PAGE: 6 OF 7 ERP: 1201002372 PACKING & LABEL SPECIFICATIONS AAAF5060BESEEVGA SPEC NO: DSAG5856 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JUN/21/2006 DRAWN: W.J.ZHU PAGE: 7 OF 7 ERP: 1201002372