AAAF5060PBESEEVGEC

5.0mm x 6.0mm SURFACE MOUNT LED LAMP Part Number: AAAF5060PBESEEVGEC PRELIMINARY SPEC Blue Hyper Orange Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z CHIPS CAN BE CONTROLLED SEPARATELY. The Blue source color devices are made with InGaN on SiC z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER Light Emitting Diode. PROCESS. The Hyper Orange source color devices are made with z AVAILABLE ON TAPE AND REEL. InGaAlP on GaAs substrate Light Emitting Diode. z PACKAGE: 500PCS / REEL. The Green source color devices are made with InGaN on z MOISTURE SENSITIVITY LEVEL : LEVEL 4. SiC Light Emitting Diode. z RoHS COMPLIANT. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAI1566 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: FEB/27/2008 DRAWN: Y.F.Lu PAGE: 1 OF 7 ERP: 1201002908 Selection Guide Part No. Dice Lens Type Blue (InGaN) AAAF5060PBESEEVGEC WATER CLEAR Hyper Orange (InGaAlP) Green (InGaN) Iv (mcd) [2] @ 30mA *50mA Min. Typ. 110 250 *650 *1000 280 600 Viewing Angle [1] 2θ1/2 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. *Luminous intensity with asterisk is measured at 50mA; Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue Hyper Orange Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 630 520 nm IF=20mA Blue Hyper Orange Green 470 621 525 nm IF=20mA Spectral Line Half-width Blue Hyper Orange Green 21 20 35 nm IF=20mA C Capacitance Blue Hyper Orange Green 100 25 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Hyper Orange Green 3.2 2 3.2 4 2.5 4 V IF=20mA IR Reverse Current Blue Hyper Orange Green 10 10 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Power dissipation[2] Hyper Orange Green 350 Units mW DC Forward Current 30 50 30 mA Peak Forward Current [1] 100 195 100 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Within 350mW at all chips are lightened. SPEC NO: DSAI1566 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: FEB/27/2008 DRAWN: Y.F.Lu PAGE: 2 OF 7 ERP: 1201002908 AAAF5060PBESEEVGEC Blue SPEC NO: DSAI1566 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: FEB/27/2008 DRAWN: Y.F.Lu PAGE: 3 OF 7 ERP: 1201002908 Hyper Orange SPEC NO: DSAI1566 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: FEB/27/2008 DRAWN: Y.F.Lu PAGE: 4 OF 7 ERP: 1201002908 Green SPEC NO: DSAI1566 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: FEB/27/2008 DRAWN: Y.F.Lu PAGE: 5 OF 7 ERP: 1201002908 AAAF5060PBESEEVGEC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAI1566 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: FEB/27/2008 DRAWN: Y.F.Lu PAGE: 6 OF 7 ERP: 1201002908 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAI1566 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu AAAF5060PBESEEVGEC DATE: FEB/27/2008 DRAWN: Y.F.Lu PAGE: 7 OF 7 ERP: 1201002908