AAAF5060QBDZGSEEC

5.0mm x 6.0mm SURFACE MOUNT LED LAMP Part Number: AAAF5060QBDZGSEEC PRELIMINARY SPEC ATTENTION Blue Green Hyper Red OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Chips can be controlled separately. The Blue source color devices are made with AlGaInN on z Suitable for all SMT assembly and solder process. Sapphire Light Emitting Diode. z Available on tape and reel. The Green source color devices are made with InGaN z Package: 500pcs / reel. on Sapphire Light Emitting Diode. z Moisture sensitivity level : level 4. The Hyper Red source color devices are made with Al- z RoHS compliant. GaInP on GaAs substrate Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH1441 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2009 DRAWN: Ting.Li PAGE: 1 OF 7 ERP: 1201002599 Selection Guide Part No. Dice Lens Type Blue (AlGaInN) AAAF5060QBDZGSEEC WATER CLEAR Green (InGaN) Hyper Red (AlGaInP) Iv (mcd) [2] @ 30mA *50mA Min. Typ. 110 250 280 650 *650 *1000 Viewing Angle [1] 2θ1/2 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. *Luminous intensity with asterisk is measured at 50mA; Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue Green Hyper Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 515 630 nm IF=20mA Blue Green Hyper Red 470 525 621 nm IF=20mA Spectral Line Half-width Blue Green Hyper Red 25 30 20 nm IF=20mA C Capacitance Blue Green Hyper Red 100 45 25 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Green Hyper Red 3.3 3.3 2 4 4.1 2.5 V IF=20mA IR Reverse Current Blue Green Hyper Red 10 10 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Power dissipation[2] Green Hyper Red 350 Units mW DC Forward Current 30 30 50 mA Peak Forward Current [1] 150 150 195 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Within 350mW at all chips are lightened. SPEC NO: DSAH1441 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2009 DRAWN: Ting.Li PAGE: 2 OF 7 ERP: 1201002599 AAAF5060QBDZGSEEC Blue SPEC NO: DSAH1441 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2009 DRAWN: Ting.Li PAGE: 3 OF 7 ERP: 1201002599 Green SPEC NO: DSAH1441 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2009 DRAWN: Ting.Li PAGE: 4 OF 7 ERP: 1201002599 Hyper Red SPEC NO: DSAH1441 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2009 DRAWN: Ting.Li PAGE: 5 OF 7 ERP: 1201002599 AAAF5060QBDZGSEEC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAH1441 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2009 DRAWN: Ting.Li PAGE: 6 OF 7 ERP: 1201002599 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAH1441 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu AAAF5060QBDZGSEEC DATE: MAY/18/2009 DRAWN: Ting.Li PAGE: 7 OF 7 ERP: 1201002599