ACPSA04-41PBWA/A

SURFACE MOUNT DISPLAY PRELIMINARY SPEC ATTENTION Part Number: ACPSA04-41PBWA/A Blue OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 0.4 inch character height. The Blue source color devices are made with InGaN z Low current operation. on SiC Light Emitting Diode. z High contrast and light output. Static electricity and surge damage the LEDS. z Categorized for luminous intensity. It is recommended to use a wrist band or anti-electrostatic z Mechanically rugged. glove when handling the LEDs. z Gray face,white segment. All devices, equipment and machinery must be electrically z Package : 400pcs / reel. grounded. z Moisture sensitivity level : level 4. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAG4988 REV NO: V.5 DATE: APR/08/2009 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: S.P.Chen PAGE: 1 OF 5 ERP: 1361000046 Selection Guide Part No. Dice ACPSA04-41PBWA/A Iv (ucd) [1] @ 10mA Lens Type Blue (InGaN) WHITE DIFFUSED Min. Typ. 1900 6400 Description Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4.0 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG4988 REV NO: V.5 DATE: APR/08/2009 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: S.P.Chen PAGE: 2 OF 5 ERP: 1361000046 Blue ACPSA04-41PBWA/A SPEC NO: DSAG4988 REV NO: V.5 DATE: APR/08/2009 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: S.P.Chen PAGE: 3 OF 5 ERP: 1361000046 ACPSA04-41PBWA/A Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG4988 REV NO: V.5 DATE: APR/08/2009 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: S.P.Chen PAGE: 4 OF 5 ERP: 1361000046 PACKING & LABEL SPECIFICATIONS ACPSA04-41PBWA/A SPEC NO: DSAG4988 REV NO: V.5 DATE: APR/08/2009 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: S.P.Chen PAGE: 5 OF 5 ERP: 1361000046