ACPSA04-41SRWA

SURFACE MOUNT DISPLAY Part Number: ACPSA04-41SRWA SUPER BRIGHT RED Features 0.4 INCH CHARACTER HEIGHT. LOW CURRENT OPERATION. HIGH CONTRAST AND LIGHT OUTPUT. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. CATEGORIZED FOR LUMINOUS INTENSITY. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 400PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm S PEC NO: DSAG4990 APPROVED: J. Lu REV NO: V.1 CHECKED: Joe Lee DATE: MAY/30/2006 DRAWN: Y.W.WANG PAGE: 1 OF 5 ERP: 1361000053 Selection Guide Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Min. ACPSA04-41SRWA SUPER BRIGHT RED (GaAlAs) WHITE DIFFUSED 4700 Typ. 16200 Common Anode, Rt. Hand Decimal. Description Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] ∆λ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Typ. 660 640 20 45 1.85 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Red 75 30 155 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAG4990 APPROVED: J. Lu REV NO: V.1 CHECKED: Joe Lee DATE: MAY/30/2006 DRAWN: Y.W.WANG PAGE: 2 OF 5 ERP: 1361000053 Super Bright Red ACPSA04-41SRWA S PEC NO: DSAG4990 APPROVED: J. Lu REV NO: V.1 CHECKED: Joe Lee DATE: MAY/30/2006 DRAWN: Y.W.WANG PAGE: 3 OF 5 ERP: 1361000053 ACPSA04-41SRWA Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) S PEC NO: DSAG4990 APPROVED: J. Lu REV NO: V.1 CHECKED: Joe Lee DATE: MAY/30/2006 DRAWN: Y.W.WANG PAGE: 4 OF 5 ERP: 1361000053 PACKING & LABEL SPECIFICATIONS ACPSA04-41SRWA S PEC NO: DSAG4990 APPROVED: J. Lu REV NO: V.1 CHECKED: Joe Lee DATE: MAY/30/2006 DRAWN: Y.W.WANG PAGE: 5 OF 5 ERP: 1361000053