ACPSC04-41SGWA

SURFACE MOUNT DISPLAY PRELIMINARY SPEC Part Number: ACPSC04-41SGWA Super Bright Green Features 0.4 INCH CHARACTER HEIGHT. LOW CURRENT OPERATION. HIGH CONTRAST AND LIGHT OUTPUT. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. CATEGORIZED FOR LUMINOUS INTENSITY. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 400PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm SPEC NO: DSAH3711 APPROVED: WYNEC REV NO: V.1 CHECKED: Joe Lee DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1361000043 Selection Guide Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Min. ACPSC04-41SGWA Super Bright Green (GaP) WHITE DIFFUSED 1900 Typ. 7500 Common Cathode, Rt. Hand Decimal. Description Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Typ. 565 568 30 15 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=10mA IF=10mA IF=10mA VF=0V;f=1MHz IF=10mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Green 62.5 25 140 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAH3711 APPROVED: WYNEC REV NO: V.1 CHECKED: Joe Lee DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1361000043 Super Bright Green ACPSC04-41SGWA SPEC NO: DSAH3711 APPROVED: WYNEC REV NO: V.1 CHECKED: Joe Lee DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1361000043 ACPSC04-41SGWA Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAH3711 APPROVED: WYNEC REV NO: V.1 CHECKED: Joe Lee DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1361000043 PACKING & LABEL SPECIFICATIONS ACPSC04-41SGWA SPEC NO: DSAH3711 APPROVED: WYNEC REV NO: V.1 CHECKED: Joe Lee DATE: MAY/04/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1361000043