ACPSC04-41SRWA

SURFACE MOUNT DISPLAY Part Number: ACPSC04-41SRWA Super Bright Red Features Description z 0.4 inch character height. The Super Bright Red source color devices are made with z Low current operation. Gallium Aluminum Arsenide Red Light Emitting Diode. z High contrast and light output. z Categorized for luminous intensity. z Mechanically rugged. z Gray face,white segment. z Package : 400pcs / reel. z Moisture sensitivity level : level 2a. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAG4600 REV NO: V.10A APPROVED: WYNEC CHECKED: Joe Lee DATE: APR/28/2013 DRAWN: F.Cui PAGE: 1 OF 5 ERP: 1361000048 Selection Guide Part No. Dice ACPSC04-41SRWA Lens Type Super Bright Red (GaAlAs) Iv (ucd) [1] @ 10mA Min. Typ. 3600 10000 *1400 *2800 White Diffused Description Common Cathode, Rt. Hand Decimal. Notes: 1. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 655 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG4600 REV NO: V.10A APPROVED: WYNEC CHECKED: Joe Lee DATE: APR/28/2013 DRAWN: F.Cui PAGE: 2 OF 5 ERP: 1361000048 Super Bright Red ACPSC04-41SRWA SPEC NO: DSAG4600 REV NO: V.10A APPROVED: WYNEC CHECKED: Joe Lee DATE: APR/28/2013 DRAWN: F.Cui PAGE: 3 OF 5 ERP: 1361000048 ACPSC04-41SRWA Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG4600 REV NO: V.10A APPROVED: WYNEC CHECKED: Joe Lee DATE: APR/28/2013 DRAWN: F.Cui PAGE: 4 OF 5 ERP: 1361000048 PACKING & LABEL SPECIFICATIONS ACPSC04-41SRWA All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAG4600 REV NO: V.10A APPROVED: WYNEC CHECKED: Joe Lee DATE: APR/28/2013 DRAWN: F.Cui PAGE: 5 OF 5 ERP: 1361000048